// triton.h -- the controller's native input model + report 0x45 field offsets.
//
// *** Copied from OpenPuck/triton.h (the shared input contract). ***
// On the PUCK, rf_link.cpp DECODES an incoming report 0x45 into g_in. On the CONTROLLER emulator we go
// the other way: deck_input.cpp fills g_in from the Steam Deck, and report45.cpp ENCODES g_in back into
// a report 0x45 to transmit. The decoders below are kept so the offsets are documented in one place and
// the round-trip is provably symmetric. report 0x45 layout:
//   [0]=0x45 [1]=seq [2..5]=buttons u32; analog offsets below are from the buttons low byte (rep[2]).
#pragma once
#include <stdint.h>

// ---- Triton button masks (the 32-bit field at rep[2..5]) ----
#define TB_A 0x1u
#define TB_B 0x2u
#define TB_X 0x4u
#define TB_Y 0x8u
#define TB_QAM 0x10u
#define TB_R3 0x20u
#define TB_VIEW 0x40u
#define TB_R4 0x80u
#define TB_R5 0x100u
#define TB_RB 0x200u
#define TB_DDN 0x400u
#define TB_DRT 0x800u
#define TB_DLF 0x1000u
#define TB_DUP 0x2000u
#define TB_MENU 0x4000u
#define TB_L3 0x8000u
#define TB_STEAM 0x10000u
#define TB_L4 0x20000u
#define TB_L5 0x40000u
#define TB_LB 0x80000u
#define TB_RPADT 0x200000u
#define TB_RPADC 0x400000u
#define TB_LPADT 0x2000000u
#define TB_LPADC 0x4000000u

// all four back paddles held -> mode-switch chord guard
#define CHORD_BACK4 (TB_R4 | TB_L4 | TB_R5 | TB_L5)

// analog-trigger fraction (of 0xFF) at which digital ZL/ZR (Switch) etc. trip
#define SW_TRIG_ON 40

// ---- report 0x45 field decoders (offsets relative to rep[2], the buttons low byte) ----
static inline int s16off(const uint8_t *r, int off)
{
	int v = r[2 + off] | (r[2 + off + 1] << 8);
	return (v & 0x8000) ? v - 0x10000 : v;
}
static inline int u16off(const uint8_t *r, int off)
{
	return r[2 + off] | (r[2 + off + 1] << 8);
}
// Controller trigger u16 tops out near half-scale (~0x8000) at a full pull, so a straight >>8 reads only
// ~0x80. Scale x2 (>>7) and saturate so a full pull maps to 0xFF.
static inline uint8_t trigU8(int u16v)
{
	int v = u16v >> 7;
	return (uint8_t)(v > 255 ? 255 : v);
}
static inline uint32_t btnsOf(const uint8_t *r)
{
	return (uint32_t)r[2] | ((uint32_t)r[3] << 8) | ((uint32_t)r[4] << 16) |
	       ((uint32_t)r[5] << 24);
}
// report 0x45 IMU offsets (PROTOCOL.md §8): accel @0x22, gyro @0x28 from report start.
void imuFrom45(const uint8_t *r, int16_t *ax, int16_t *ay, int16_t *az,
	       int16_t *gx, int16_t *gy, int16_t *gz);

// ---- shared decoded input (filled by deck_input.cpp, read by report45.cpp) ----
struct PuckInput {
	// raw Triton buttons (TB_*)
	uint32_t buttons;
	int16_t lx, ly, rx, ry; // sticks (int16, center 0)
	uint8_t lt, rt; // triggers scaled 0..255 (trigU8)
	int16_t lpx, lpy, rpx, rpy; // left / right trackpad coords (int16)
	uint16_t lpp, rpp; // left / right trackpad pressure (u16)
	int16_t ax, ay, az; // accelerometer
	int16_t gx, gy, gz; // gyroscope
};
extern PuckInput g_in;