Add files via upload

arch/arm/mach-pxa/Kconfig

@@ -0,0 +1,715 @@
+if ARCH_PXA
+
+menu "Intel PXA2xx/PXA3xx Implementations"
+
+comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
+
+config MACH_PXA25X_DT
+	bool "Support PXA25x platforms from device tree"
+	select PINCTRL
+	select POWER_SUPPLY
+	select PXA25x
+	select USE_OF
+	help
+	  Include support for Marvell PXA25x based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_PXA25x_DT is enabled.
+
+config MACH_PXA27X_DT
+	bool "Support PXA27x platforms from device tree"
+	select PINCTRL
+	select POWER_SUPPLY
+	select PXA27x
+	select USE_OF
+	help
+	  Include support for Marvell PXA27x based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_PXA27X_DT is enabled.
+
+config MACH_PXA3XX_DT
+	bool "Support PXA3xx platforms from device tree"
+	select CPU_PXA300
+	select PINCTRL
+	select POWER_SUPPLY
+	select PXA3xx
+	select USE_OF
+	help
+	  Include support for Marvell PXA3xx based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_PXA3XX_DT is enabled.
+
+config ARCH_LUBBOCK
+	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+	select PXA25x
+	select SA1111
+
+config MACH_MAINSTONE
+	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+	select PXA27x
+
+config MACH_ZYLONITE
+	bool
+	select PXA3xx
+
+config MACH_ZYLONITE300
+	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
+	select CPU_PXA300
+	select CPU_PXA310
+	select MACH_ZYLONITE
+
+config MACH_ZYLONITE320
+	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
+	select CPU_PXA320
+	select MACH_ZYLONITE
+
+config MACH_LITTLETON
+	bool "PXA3xx Form Factor Platform (aka Littleton)"
+	select CPU_PXA300
+	select CPU_PXA310
+	select PXA3xx
+
+config MACH_TAVOREVB
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select CPU_PXA930
+	select CPU_PXA935
+	select PXA3xx
+	select FB
+	select FB_PXA
+
+config MACH_SAAR
+	bool "PXA930 Handheld Platform (aka SAAR)"
+	select CPU_PXA930
+	select CPU_PXA935
+	select PXA3xx
+	select FB
+	select FB_PXA
+
+comment "Third Party Dev Platforms (sorted by vendor name)"
+
+config ARCH_PXA_IDP
+	bool "Accelent Xscale IDP"
+	select PXA25x
+
+config ARCH_VIPER
+	bool "Arcom/Eurotech VIPER SBC"
+	select ARCOM_PCMCIA
+	select I2C_GPIO if I2C=y
+	select ISA
+	select PXA25x
+
+config MACH_ARCOM_ZEUS
+	bool "Arcom/Eurotech ZEUS SBC"
+	select ARCOM_PCMCIA
+	select ISA
+	select PXA27x
+
+config MACH_BALLOON3
+	bool "Balloon 3 board"
+	select IWMMXT
+	select PXA27x
+
+config MACH_CSB726
+	bool "Enable Cogent CSB726 System On a Module"
+	select IWMMXT
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on a Cogent
+	  CSB726 System On Module.
+
+config CSB726_CSB701
+	bool "Enable support for CSB701 baseboard"
+	depends on MACH_CSB726
+
+config MACH_ARMCORE
+	bool "CompuLab CM-X255/CM-X270 modules"
+	select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
+	select IWMMXT
+	select MIGHT_HAVE_PCI
+	select NEED_MACH_IO_H if PCI
+	select PXA25x
+	select PXA27x
+
+config MACH_EM_X270
+	bool "CompuLab EM-x270 platform"
+	select PXA27x
+
+config MACH_EXEDA
+	bool "CompuLab eXeda platform"
+	select PXA27x
+
+config MACH_CM_X300
+	bool "CompuLab CM-X300 modules"
+	select CPU_PXA300
+	select CPU_PXA310
+	select PXA3xx
+
+config MACH_CAPC7117
+	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
+	select CPU_PXA320
+	select PXA3xx
+
+config ARCH_GUMSTIX
+	bool "Gumstix XScale 255 boards"
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on
+	  Basix, Connex, ws-200ax, ws-400ax systems
+
+choice
+	prompt "Gumstix Carrier/Expansion Board"
+	depends on ARCH_GUMSTIX
+
+config GUMSTIX_AM200EPD
+	bool "Enable AM200EPD board support"
+
+config GUMSTIX_AM300EPD
+	bool "Enable AM300EPD board support"
+
+endchoice
+
+config MACH_INTELMOTE2
+	bool "Intel Mote 2 Platform"
+	select IWMMXT
+	select PXA27x
+
+config MACH_STARGATE2
+	bool "Intel Stargate 2 Platform"
+	select IWMMXT
+	select PXA27x
+
+config MACH_XCEP
+	bool "Iskratel Electronics XCEP"
+	select MTD
+	select MTD_CFI
+	select MTD_CFI_INTELEXT
+	select MTD_PHYSMAP
+	select PXA25x
+	help
+	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+	  Tuned for usage in Libera instruments for particle accelerators.
+
+config TRIZEPS_PXA
+	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+
+config MACH_TRIZEPS4
+	bool "Keith und Koep Trizeps4 DIMM-Module"
+	depends on TRIZEPS_PXA
+	select PXA27x
+	select TRIZEPS_PCMCIA
+
+config MACH_TRIZEPS4WL
+	bool "Keith und Koep Trizeps4-WL DIMM-Module"
+	depends on TRIZEPS_PXA
+	select MACH_TRIZEPS4
+	select PXA27x
+	select TRIZEPS_PCMCIA
+
+choice
+	prompt "Select base board for Trizeps module"
+	depends on TRIZEPS_PXA
+
+config MACH_TRIZEPS_CONXS
+	bool "ConXS Eval Board"
+
+config MACH_TRIZEPS_UCONXS
+	bool "uConXS Eval Board"
+
+config MACH_TRIZEPS_ANY
+	bool "another Board"
+
+endchoice
+
+config ARCOM_PCMCIA
+	bool
+	help
+	  Generic option for Arcom Viper/Zeus PCMCIA
+
+config TRIZEPS_PCMCIA
+	bool
+	help
+	  Enable PCMCIA support for Trizeps modules
+
+config MACH_LOGICPD_PXA270
+	bool "LogicPD PXA270 Card Engine Development Platform"
+	select PXA27x
+
+config MACH_PCM027
+	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+	select IWMMXT
+	select PXA27x
+
+config MACH_PCM990_BASEBOARD
+	bool "PHYTEC PCM-990 development board"
+	depends on MACH_PCM027
+
+choice
+	prompt "display on pcm990"
+	depends on MACH_PCM990_BASEBOARD
+
+config PCM990_DISPLAY_SHARP
+	bool "sharp lq084v1dg21 stn display"
+
+config PCM990_DISPLAY_NEC
+	bool "nec nl6448bc20_18d tft display"
+
+config PCM990_DISPLAY_NONE
+	bool "no display"
+
+endchoice
+
+config MACH_COLIBRI
+	bool "Toradex Colibri PXA270"
+	select PXA27x
+
+config MACH_COLIBRI_PXA270_INCOME
+	bool "Income s.r.o. PXA270 SBC"
+	depends on MACH_COLIBRI
+	select PXA27x
+
+config MACH_COLIBRI300
+	bool "Toradex Colibri PXA300/310"
+	select CPU_PXA300
+	select CPU_PXA310
+	select PXA3xx
+
+config MACH_COLIBRI320
+	bool "Toradex Colibri PXA320"
+	select CPU_PXA320
+	select PXA3xx
+
+config MACH_COLIBRI_EVALBOARD
+	bool "Toradex Colibri Evaluation Carrier Board support"
+	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
+
+config MACH_VPAC270
+	bool "Voipac PXA270"
+	select HAVE_PATA_PLATFORM
+	select PXA27x
+	help
+	  PXA270 based Single Board Computer.
+
+comment "End-user Products (sorted by vendor name)"
+
+config MACH_H4700
+	bool "HP iPAQ hx4700"
+	select IWMMXT
+	select PXA27x
+
+config MACH_H5000
+	bool "HP iPAQ h5000"
+	select PXA25x
+
+config MACH_HIMALAYA
+	bool "HTC Himalaya Support"
+	select CPU_PXA26x
+
+config MACH_MAGICIAN
+	bool "Enable HTC Magician Support"
+	select IWMMXT
+	select PXA27x
+
+config MACH_MIOA701
+	bool "Mitac Mio A701 Support"
+	select IWMMXT
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on a
+	  MIO A701. Currently there is only basic support
+	  for this PDA.
+
+config PXA_EZX
+	bool "Motorola EZX Platform"
+	select IWMMXT
+	select PXA27x
+
+config MACH_EZX_A780
+	bool "Motorola EZX A780"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E680
+	bool "Motorola EZX E680"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A1200
+	bool "Motorola EZX A1200"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A910
+	bool "Motorola EZX A910"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E6
+	bool "Motorola EZX E6"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E2
+	bool "Motorola EZX E2"
+	default y
+	depends on PXA_EZX
+
+config MACH_MP900C
+	bool "Nec Mobilepro 900/c"
+	select PXA25x
+
+config ARCH_PXA_PALM
+	bool "PXA based Palm PDAs"
+
+config MACH_PALM27X
+	bool
+
+config MACH_PALMTE2
+	bool "Palm Tungsten|E2"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
+	  handheld computer.
+
+config MACH_PALMTC
+	bool "Palm Tungsten|C"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
+	  handheld computer.
+
+config MACH_PALMT5
+	bool "Palm Tungsten|T5"
+	default y
+	depends on ARCH_PXA_PALM
+	select IWMMXT
+	select MACH_PALM27X
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+	  handheld computer.
+
+config MACH_PALMTX
+	bool "Palm T|X"
+	default y
+	depends on ARCH_PXA_PALM
+	select IWMMXT
+	select MACH_PALM27X
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on a Palm T|X
+	  handheld computer.
+
+config MACH_PALMZ72
+	bool "Palm Zire 72"
+	default y
+	depends on ARCH_PXA_PALM
+	select IWMMXT
+	select MACH_PALM27X
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on Palm Zire 72
+	  handheld computer.
+
+config MACH_PALMLD
+	bool "Palm LifeDrive"
+	default y
+	depends on ARCH_PXA_PALM
+	select IWMMXT
+	select MACH_PALM27X
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on a Palm LifeDrive
+	  handheld computer.
+
+config PALM_TREO
+	bool
+	depends on ARCH_PXA_PALM
+
+config MACH_CENTRO
+	bool "Palm Centro 685 (GSM)"
+	default y
+	depends on ARCH_PXA_PALM
+	select IWMMXT
+	select MACH_PALM27X
+	select PALM_TREO
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
+	  smartphone.
+
+config MACH_TREO680
+	bool "Palm Treo 680"
+	default y
+	depends on ARCH_PXA_PALM
+	select IWMMXT
+	select MACH_PALM27X
+	select PALM_TREO
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on Palm Treo 680
+	  smartphone.
+
+config MACH_RAUMFELD_RC
+	bool "Raumfeld Controller"
+	select CPU_PXA300
+	select POWER_SUPPLY
+	select PXA3xx
+
+config MACH_RAUMFELD_CONNECTOR
+	bool "Raumfeld Connector"
+	select CPU_PXA300
+	select POWER_SUPPLY
+	select PXA3xx
+
+config MACH_RAUMFELD_SPEAKER
+	bool "Raumfeld Speaker"
+	select CPU_PXA300
+	select POWER_SUPPLY
+	select PXA3xx
+
+config PXA_SHARPSL
+	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
+	select SHARP_PARAM
+	select SHARP_SCOOP
+	help
+	  Say Y here if you intend to run this kernel on a
+	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
+	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
+	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
+	  handheld computer.
+
+config PXA_SHARPSL_DETECT_MACH_ID
+	bool "Detect machine ID at run-time in the decompressor"
+	depends on PXA_SHARPSL
+	help
+	  Say Y here if you want the zImage decompressor to detect
+	  the Zaurus machine ID at run-time. For latest kexec-based
+	  boot loader, this is not necessary.
+
+config MACH_POODLE
+	bool "Enable Sharp SL-5600 (Poodle) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select SHARP_LOCOMO
+
+config MACH_CORGI
+	bool "Enable Sharp SL-C700 (Corgi) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+	bool "Enable Sharp SL-C750 (Shepherd) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+	bool "Enable Sharp SL-C760 (Husky) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_AKITA
+	bool "Enable Sharp SL-1000 (Akita) Support"
+	depends on PXA_SHARPSL
+	select I2C
+	select I2C_PXA
+	select MACH_SPITZ
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_SPITZ
+	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+
+config TOSA_BT
+	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+	depends on MACH_TOSA && NET
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on tosa.
+
+config TOSA_USE_EXT_KEYCODES
+	bool "Tosa keyboard: use extended keycodes"
+	depends on MACH_TOSA
+	default n
+	help
+	  Say Y here to enable the tosa keyboard driver to generate extended
+	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+	  by either console keyboard driver or by Kdrive keybd driver.
+
+	  Say Y only if you know, what you are doing!
+
+config MACH_ICONTROL
+	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
+	select CPU_PXA320
+	select PXA3xx
+
+config ARCH_PXA_ESERIES
+	bool "PXA based Toshiba e-series PDAs"
+	select FB_W100
+	select PXA25x
+
+config MACH_E330
+	bool "Toshiba e330"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e330 family PDA.
+
+config MACH_E350
+	bool "Toshiba e350"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e350 family PDA.
+
+config MACH_E740
+	bool "Toshiba e740"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e740 family PDA.
+
+config MACH_E750
+	bool "Toshiba e750"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e750 family PDA.
+
+config MACH_E400
+	bool "Toshiba e400"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e400 family PDA.
+
+config MACH_E800
+	bool "Toshiba e800"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e800 family PDA.
+
+config MACH_ZIPIT2
+	bool "Zipit Z2 Handheld"
+	select PXA27x
+endmenu
+
+config PXA25x
+	bool
+	select CPU_XSCALE
+	help
+	  Select code specific to PXA21x/25x/26x variants
+
+config PXA27x
+	bool
+	select CPU_XSCALE
+	help
+	  Select code specific to PXA27x variants
+
+config CPU_PXA26x
+	bool
+	select PXA25x
+	help
+	  Select code specific to PXA26x (codename Dalhart)
+
+config PXA3xx
+	bool
+	select CPU_XSC3
+	help
+	  Select code specific to PXA3xx variants
+
+config CPU_PXA300
+	bool
+	select PXA3xx
+	help
+	  PXA300 (codename Monahans-L)
+
+config CPU_PXA310
+	bool
+	select CPU_PXA300
+	select PXA310_ULPI if USB_ULPI
+	help
+	  PXA310 (codename Monahans-LV)
+
+config CPU_PXA320
+	bool
+	select PXA3xx
+	help
+	  PXA320 (codename Monahans-P)
+
+config CPU_PXA930
+	bool
+	select PXA3xx
+	help
+	  PXA930 (codename Tavor-P)
+
+config CPU_PXA935
+	bool
+	select CPU_PXA930
+	help
+	  PXA935 (codename Tavor-P65)
+
+config PXA_SHARP_C7xx
+	bool
+	select SHARPSL_PM
+	help
+	  Enable support for all Sharp C7xx models
+
+config PXA_SHARP_Cxx00
+	bool
+	select SHARPSL_PM
+	help
+	  Enable common support for Sharp Cxx00 models
+
+config SHARPSL_PM
+	bool
+	select APM_EMULATION
+	select SHARPSL_PM_MAX1111
+
+config SHARPSL_PM_MAX1111
+	bool
+	select HWMON
+	select SENSORS_MAX1111
+	select SPI
+	select SPI_MASTER
+
+config PXA310_ULPI
+	bool
+
+config PXA_SYSTEMS_CPLDS
+	tristate "Motherboard cplds"
+	default ARCH_LUBBOCK || MACH_MAINSTONE
+	help
+	  This driver supports the Lubbock and Mainstone multifunction chip
+	  found on the pxa25x development platform system (Lubbock) and pxa27x
+	  development platform system (Mainstone). This IO board supports the
+	  interrupts handling, ethernet controller, flash chips, etc ...
+
+endif

arch/arm/mach-pxa/Makefile.boot

@@ -0,0 +1,2 @@
+   zreladdr-y	+= 0xa0008000
+

arch/arm/mach-pxa/am200epd.c

@@ -0,0 +1,386 @@
+/*
+ * am200epd.c -- Platform device for AM200 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Metronome display controller.
+ * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Lyre interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include "pxa25x.h"
+#include "gumstix.h"
+#include <linux/platform_data/video-pxafb.h>
+
+#include "generic.h"
+
+#include <video/metronomefb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am200_device;
+static struct metronome_board am200_board;
+
+static struct pxafb_mode_info am200_fb_mode_9inch7 = {
+	.pixclock	= 40000,
+	.xres		= 1200,
+	.yres		= 842,
+	.bpp		= 16,
+	.hsync_len	= 2,
+	.left_margin	= 2,
+	.right_margin	= 2,
+	.vsync_len	= 1,
+	.upper_margin	= 2,
+	.lower_margin	= 25,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_8inch = {
+	.pixclock	= 40000,
+	.xres		= 1088,
+	.yres		= 791,
+	.bpp		= 16,
+	.hsync_len	= 28,
+	.left_margin	= 8,
+	.right_margin	= 30,
+	.vsync_len	= 8,
+	.upper_margin	= 10,
+	.lower_margin	= 8,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_6inch = {
+	.pixclock	= 40189,
+	.xres		= 832,
+	.yres		= 622,
+	.bpp		= 16,
+	.hsync_len	= 28,
+	.left_margin	= 34,
+	.right_margin	= 34,
+	.vsync_len	= 25,
+	.upper_margin	= 0,
+	.lower_margin	= 2,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info am200_fb_info = {
+	.modes		= &am200_fb_mode_6inch,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_TYPE_COLOR_TFT | LCD_PCLK_EDGE_FALL |
+			  LCD_AC_BIAS_FREQ(24),
+};
+
+/* register offsets for gpio control */
+#define LED_GPIO_PIN 51
+#define STDBY_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define RDY_GPIO_PIN 32
+#define ERR_GPIO_PIN 17
+#define PCBPWR_GPIO_PIN 16
+static int gpios[] = { LED_GPIO_PIN , STDBY_GPIO_PIN , RST_GPIO_PIN,
+			RDY_GPIO_PIN, ERR_GPIO_PIN, PCBPWR_GPIO_PIN };
+static char *gpio_names[] = { "LED" , "STDBY" , "RST", "RDY", "ERR", "PCBPWR" };
+
+static int am200_init_gpio_regs(struct metronomefb_par *par)
+{
+	int i;
+	int err;
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		err = gpio_request(gpios[i], gpio_names[i]);
+		if (err) {
+			dev_err(&am200_device->dev, "failed requesting "
+				"gpio %s, err=%d\n", gpio_names[i], err);
+			goto err_req_gpio;
+		}
+	}
+
+	gpio_direction_output(LED_GPIO_PIN, 0);
+	gpio_direction_output(STDBY_GPIO_PIN, 0);
+	gpio_direction_output(RST_GPIO_PIN, 0);
+
+	gpio_direction_input(RDY_GPIO_PIN);
+	gpio_direction_input(ERR_GPIO_PIN);
+
+	gpio_direction_output(PCBPWR_GPIO_PIN, 0);
+
+	return 0;
+
+err_req_gpio:
+	while (--i >= 0)
+		gpio_free(gpios[i]);
+
+	return err;
+}
+
+static void am200_cleanup(struct metronomefb_par *par)
+{
+	int i;
+
+	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++)
+		gpio_free(gpios[i]);
+}
+
+static int am200_share_video_mem(struct fb_info *info)
+{
+	/* rough check if this is our desired fb and not something else */
+	if ((info->var.xres != am200_fb_info.modes->xres)
+		|| (info->var.yres != am200_fb_info.modes->yres))
+		return 0;
+
+	/* we've now been notified that we have our new fb */
+	am200_board.metromem = info->screen_base;
+	am200_board.host_fbinfo = info;
+
+	/* try to refcount host drv since we are the consumer after this */
+	if (!try_module_get(info->fbops->owner))
+		return -ENODEV;
+
+	return 0;
+}
+
+static int am200_unshare_video_mem(struct fb_info *info)
+{
+	dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+	if (info != am200_board.host_fbinfo)
+		return 0;
+
+	module_put(am200_board.host_fbinfo->fbops->owner);
+	return 0;
+}
+
+static int am200_fb_notifier_callback(struct notifier_block *self,
+				 unsigned long event, void *data)
+{
+	struct fb_event *evdata = data;
+	struct fb_info *info = evdata->info;
+
+	dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+	if (event == FB_EVENT_FB_REGISTERED)
+		return am200_share_video_mem(info);
+	else if (event == FB_EVENT_FB_UNREGISTERED)
+		return am200_unshare_video_mem(info);
+
+	return 0;
+}
+
+static struct notifier_block am200_fb_notif = {
+	.notifier_call = am200_fb_notifier_callback,
+};
+
+/* this gets called as part of our init. these steps must be done now so
+ * that we can use pxa_set_fb_info */
+static void __init am200_presetup_fb(void)
+{
+	int fw;
+	int fh;
+	int padding_size;
+	int totalsize;
+
+	switch (panel_type) {
+	case 6:
+		am200_fb_info.modes = &am200_fb_mode_6inch;
+		break;
+	case 8:
+		am200_fb_info.modes = &am200_fb_mode_8inch;
+		break;
+	case 97:
+		am200_fb_info.modes = &am200_fb_mode_9inch7;
+		break;
+	default:
+		dev_err(&am200_device->dev, "invalid panel_type selection,"
+						" setting to 6\n");
+		am200_fb_info.modes = &am200_fb_mode_6inch;
+		break;
+	}
+
+	/* the frame buffer is divided as follows:
+	command | CRC | padding
+	16kb waveform data | CRC | padding
+	image data | CRC
+	*/
+
+	fw = am200_fb_info.modes->xres;
+	fh = am200_fb_info.modes->yres;
+
+	/* waveform must be 16k + 2 for checksum */
+	am200_board.wfm_size = roundup(16*1024 + 2, fw);
+
+	padding_size = PAGE_SIZE + (4 * fw);
+
+	/* total is 1 cmd , 1 wfm, padding and image */
+	totalsize = fw + am200_board.wfm_size + padding_size + (fw*fh);
+
+	/* save this off because we're manipulating fw after this and
+	 * we'll need it when we're ready to setup the framebuffer */
+	am200_board.fw = fw;
+	am200_board.fh = fh;
+
+	/* the reason we do this adjustment is because we want to acquire
+	 * more framebuffer memory without imposing custom awareness on the
+	 * underlying pxafb driver */
+	am200_fb_info.modes->yres = DIV_ROUND_UP(totalsize, fw);
+
+	/* we divide since we told the LCD controller we're 16bpp */
+	am200_fb_info.modes->xres /= 2;
+
+	pxa_set_fb_info(NULL, &am200_fb_info);
+
+}
+
+/* this gets called by metronomefb as part of its init, in our case, we
+ * have already completed initial framebuffer init in presetup_fb so we
+ * can just setup the fb access pointers */
+static int am200_setup_fb(struct metronomefb_par *par)
+{
+	int fw;
+	int fh;
+
+	fw = am200_board.fw;
+	fh = am200_board.fh;
+
+	/* metromem was set up by the notifier in share_video_mem so now
+	 * we can use its value to calculate the other entries */
+	par->metromem_cmd = (struct metromem_cmd *) am200_board.metromem;
+	par->metromem_wfm = am200_board.metromem + fw;
+	par->metromem_img = par->metromem_wfm + am200_board.wfm_size;
+	par->metromem_img_csum = (u16 *) (par->metromem_img + (fw * fh));
+	par->metromem_dma = am200_board.host_fbinfo->fix.smem_start;
+
+	return 0;
+}
+
+static int am200_get_panel_type(void)
+{
+	return panel_type;
+}
+
+static irqreturn_t am200_handle_irq(int irq, void *dev_id)
+{
+	struct metronomefb_par *par = dev_id;
+
+	wake_up_interruptible(&par->waitq);
+	return IRQ_HANDLED;
+}
+
+static int am200_setup_irq(struct fb_info *info)
+{
+	int ret;
+
+	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am200_handle_irq,
+				IRQF_TRIGGER_FALLING, "AM200", info->par);
+	if (ret)
+		dev_err(&am200_device->dev, "request_irq failed: %d\n", ret);
+
+	return ret;
+}
+
+static void am200_set_rst(struct metronomefb_par *par, int state)
+{
+	gpio_set_value(RST_GPIO_PIN, state);
+}
+
+static void am200_set_stdby(struct metronomefb_par *par, int state)
+{
+	gpio_set_value(STDBY_GPIO_PIN, state);
+}
+
+static int am200_wait_event(struct metronomefb_par *par)
+{
+	return wait_event_timeout(par->waitq, gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static int am200_wait_event_intr(struct metronomefb_par *par)
+{
+	return wait_event_interruptible_timeout(par->waitq,
+					gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static struct metronome_board am200_board = {
+	.owner			= THIS_MODULE,
+	.setup_irq		= am200_setup_irq,
+	.setup_io		= am200_init_gpio_regs,
+	.setup_fb		= am200_setup_fb,
+	.set_rst		= am200_set_rst,
+	.set_stdby		= am200_set_stdby,
+	.met_wait_event		= am200_wait_event,
+	.met_wait_event_intr	= am200_wait_event_intr,
+	.get_panel_type		= am200_get_panel_type,
+	.cleanup		= am200_cleanup,
+};
+
+static unsigned long am200_pin_config[] __initdata = {
+	GPIO51_GPIO,
+	GPIO49_GPIO,
+	GPIO48_GPIO,
+	GPIO32_GPIO,
+	GPIO17_GPIO,
+	GPIO16_GPIO,
+};
+
+int __init am200_init(void)
+{
+	int ret;
+
+	/* before anything else, we request notification for any fb
+	 * creation events */
+	fb_register_client(&am200_fb_notif);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(am200_pin_config));
+
+	/* request our platform independent driver */
+	request_module("metronomefb");
+
+	am200_device = platform_device_alloc("metronomefb", -1);
+	if (!am200_device)
+		return -ENOMEM;
+
+	/* the am200_board that will be seen by metronomefb is a copy */
+	platform_device_add_data(am200_device, &am200_board,
+					sizeof(am200_board));
+
+	/* this _add binds metronomefb to am200. metronomefb refcounts am200 */
+	ret = platform_device_add(am200_device);
+
+	if (ret) {
+		platform_device_put(am200_device);
+		fb_unregister_client(&am200_fb_notif);
+		return ret;
+	}
+
+	am200_presetup_fb();
+
+	return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+
+MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");

arch/arm/mach-pxa/am300epd.c

@@ -0,0 +1,296 @@
+/*
+ * am300epd.c -- Platform device for AM300 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Broadsheet display controller.
+ * on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Broadsheet interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include "gumstix.h"
+#include "mfp-pxa25x.h"
+#include <mach/irqs.h>
+#include <linux/platform_data/video-pxafb.h>
+
+#include "generic.h"
+
+#include <video/broadsheetfb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am300_device;
+static struct broadsheet_board am300_board;
+
+static unsigned long am300_pin_config[] __initdata = {
+	GPIO16_GPIO,
+	GPIO17_GPIO,
+	GPIO32_GPIO,
+	GPIO48_GPIO,
+	GPIO49_GPIO,
+	GPIO51_GPIO,
+	GPIO74_GPIO,
+	GPIO75_GPIO,
+	GPIO76_GPIO,
+	GPIO77_GPIO,
+
+	/* this is the 16-bit hdb bus 58-73 */
+	GPIO58_GPIO,
+	GPIO59_GPIO,
+	GPIO60_GPIO,
+	GPIO61_GPIO,
+
+	GPIO62_GPIO,
+	GPIO63_GPIO,
+	GPIO64_GPIO,
+	GPIO65_GPIO,
+
+	GPIO66_GPIO,
+	GPIO67_GPIO,
+	GPIO68_GPIO,
+	GPIO69_GPIO,
+
+	GPIO70_GPIO,
+	GPIO71_GPIO,
+	GPIO72_GPIO,
+	GPIO73_GPIO,
+};
+
+/* register offsets for gpio control */
+#define PWR_GPIO_PIN	16
+#define CFG_GPIO_PIN	17
+#define RDY_GPIO_PIN	32
+#define DC_GPIO_PIN	48
+#define RST_GPIO_PIN	49
+#define LED_GPIO_PIN	51
+#define RD_GPIO_PIN	74
+#define WR_GPIO_PIN	75
+#define CS_GPIO_PIN	76
+#define IRQ_GPIO_PIN	77
+
+/* hdb bus */
+#define DB0_GPIO_PIN	58
+#define DB15_GPIO_PIN	73
+
+static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
+			RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
+			IRQ_GPIO_PIN, LED_GPIO_PIN };
+static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
+				"CS", "IRQ", "LED" };
+
+static int am300_wait_event(struct broadsheetfb_par *par)
+{
+	/* todo: improve err recovery */
+	wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
+	return 0;
+}
+
+static int am300_init_gpio_regs(struct broadsheetfb_par *par)
+{
+	int i;
+	int err;
+	char dbname[8];
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		err = gpio_request(gpios[i], gpio_names[i]);
+		if (err) {
+			dev_err(&am300_device->dev, "failed requesting "
+				"gpio %s, err=%d\n", gpio_names[i], err);
+			goto err_req_gpio;
+		}
+	}
+
+	/* we also need to take care of the hdb bus */
+	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
+		sprintf(dbname, "DB%d", i);
+		err = gpio_request(i, dbname);
+		if (err) {
+			dev_err(&am300_device->dev, "failed requesting "
+				"gpio %d, err=%d\n", i, err);
+			goto err_req_gpio2;
+		}
+	}
+
+	/* setup the outputs and init values */
+	gpio_direction_output(PWR_GPIO_PIN, 0);
+	gpio_direction_output(CFG_GPIO_PIN, 1);
+	gpio_direction_output(DC_GPIO_PIN, 0);
+	gpio_direction_output(RD_GPIO_PIN, 1);
+	gpio_direction_output(WR_GPIO_PIN, 1);
+	gpio_direction_output(CS_GPIO_PIN, 1);
+	gpio_direction_output(RST_GPIO_PIN, 0);
+
+	/* setup the inputs */
+	gpio_direction_input(RDY_GPIO_PIN);
+	gpio_direction_input(IRQ_GPIO_PIN);
+
+	/* start the hdb bus as an input */
+	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+		gpio_direction_output(i, 0);
+
+	/* go into command mode */
+	gpio_set_value(CFG_GPIO_PIN, 1);
+	gpio_set_value(RST_GPIO_PIN, 0);
+	msleep(10);
+	gpio_set_value(RST_GPIO_PIN, 1);
+	msleep(10);
+	am300_wait_event(par);
+
+	return 0;
+
+err_req_gpio2:
+	while (--i >= DB0_GPIO_PIN)
+		gpio_free(i);
+	i = ARRAY_SIZE(gpios);
+err_req_gpio:
+	while (--i >= 0)
+		gpio_free(gpios[i]);
+
+	return err;
+}
+
+static int am300_init_board(struct broadsheetfb_par *par)
+{
+	return am300_init_gpio_regs(par);
+}
+
+static void am300_cleanup(struct broadsheetfb_par *par)
+{
+	int i;
+
+	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++)
+		gpio_free(gpios[i]);
+
+	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+		gpio_free(i);
+
+}
+
+static u16 am300_get_hdb(struct broadsheetfb_par *par)
+{
+	u16 res = 0;
+	int i;
+
+	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+		res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;
+
+	return res;
+}
+
+static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
+{
+	int i;
+
+	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+		gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
+}
+
+
+static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
+				u8 state)
+{
+	switch (bit) {
+	case BS_CS:
+		gpio_set_value(CS_GPIO_PIN, state);
+		break;
+	case BS_DC:
+		gpio_set_value(DC_GPIO_PIN, state);
+		break;
+	case BS_WR:
+		gpio_set_value(WR_GPIO_PIN, state);
+		break;
+	}
+}
+
+static int am300_get_panel_type(void)
+{
+	return panel_type;
+}
+
+static irqreturn_t am300_handle_irq(int irq, void *dev_id)
+{
+	struct broadsheetfb_par *par = dev_id;
+
+	wake_up(&par->waitq);
+	return IRQ_HANDLED;
+}
+
+static int am300_setup_irq(struct fb_info *info)
+{
+	int ret;
+	struct broadsheetfb_par *par = info->par;
+
+	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq,
+				IRQF_TRIGGER_RISING, "AM300", par);
+	if (ret)
+		dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);
+
+	return ret;
+}
+
+static struct broadsheet_board am300_board = {
+	.owner			= THIS_MODULE,
+	.init			= am300_init_board,
+	.cleanup		= am300_cleanup,
+	.set_hdb		= am300_set_hdb,
+	.get_hdb		= am300_get_hdb,
+	.set_ctl		= am300_set_ctl,
+	.wait_for_rdy		= am300_wait_event,
+	.get_panel_type		= am300_get_panel_type,
+	.setup_irq		= am300_setup_irq,
+};
+
+int __init am300_init(void)
+{
+	int ret;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));
+
+	/* request our platform independent driver */
+	request_module("broadsheetfb");
+
+	am300_device = platform_device_alloc("broadsheetfb", -1);
+	if (!am300_device)
+		return -ENOMEM;
+
+	/* the am300_board that will be seen by broadsheetfb is a copy */
+	platform_device_add_data(am300_device, &am300_board,
+					sizeof(am300_board));
+
+	ret = platform_device_add(am300_device);
+
+	if (ret) {
+		platform_device_put(am300_device);
+		return ret;
+	}
+
+	return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 37, 6, 97");
+
+MODULE_DESCRIPTION("board driver for am300 epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");

arch/arm/mach-pxa/balloon3.c

@@ -0,0 +1,828 @@
+/*
+ *  linux/arch/arm/mach-pxa/balloon3.c
+ *
+ *  Support for Balloonboard.org Balloon3 board.
+ *
+ *  Author:	Nick Bane, Wookey, Jonathan McDowell
+ *  Created:	June, 2006
+ *  Copyright:	Toby Churchill Ltd
+ *  Derived from mainstone.c, by Nico Pitre
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/ucb1400.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/types.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/i2c/pxa-i2c.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/physmap.h>
+#include <linux/regulator/max1586.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include "pxa27x.h"
+#include <mach/balloon3.h>
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include "udc.h"
+#include "pxa27x-udc.h"
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long balloon3_pin_config[] __initdata = {
+	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* Reset, configured as GPIO wakeup source */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
+
+/******************************************************************************
+ * Compatibility: Parameter parsing
+ ******************************************************************************/
+static unsigned long balloon3_irq_enabled;
+
+static unsigned long balloon3_features_present =
+		(1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
+		(1 << BALLOON3_FEATURE_AUDIO) |
+		(1 << BALLOON3_FEATURE_TOPPOLY);
+
+int balloon3_has(enum balloon3_features feature)
+{
+	return (balloon3_features_present & (1 << feature)) ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(balloon3_has);
+
+int __init parse_balloon3_features(char *arg)
+{
+	if (!arg)
+		return 0;
+
+	return kstrtoul(arg, 0, &balloon3_features_present);
+}
+early_param("balloon3_features", parse_balloon3_features);
+
+/******************************************************************************
+ * Compact Flash slot
+ ******************************************************************************/
+#if	defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
+static unsigned long balloon3_cf_pin_config[] __initdata = {
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+};
+
+static void __init balloon3_cf_init(void)
+{
+	if (!balloon3_has(BALLOON3_FEATURE_CF))
+		return;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config));
+}
+#else
+static inline void balloon3_cf_init(void) {}
+#endif
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition balloon3_nor_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data balloon3_flash_data[] = {
+	{
+		.width		= 2,	/* bankwidth in bytes */
+		.parts		= balloon3_nor_partitions,
+		.nr_parts	= ARRAY_SIZE(balloon3_nor_partitions)
+	}
+};
+
+static struct resource balloon3_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device balloon3_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &balloon3_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = balloon3_flash_data,
+	},
+};
+static void __init balloon3_nor_init(void)
+{
+	platform_device_register(&balloon3_flash);
+}
+#else
+static inline void balloon3_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static unsigned long balloon3_ac97_pin_config[] __initdata = {
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO113_AC97_nRESET,
+	GPIO95_GPIO,
+};
+
+static struct ucb1400_pdata vpac270_ucb1400_pdata = {
+	.irq		= PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ),
+};
+
+
+static struct platform_device balloon3_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &vpac270_ucb1400_pdata,
+	},
+};
+
+static void __init balloon3_ts_init(void)
+{
+	if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
+		return;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
+	pxa_set_ac97_info(NULL);
+	platform_device_register(&balloon3_ucb1400_device);
+}
+#else
+static inline void balloon3_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static unsigned long balloon3_lcd_pin_config[] __initdata = {
+	GPIOxx_LCD_TFT_16BPP,
+	GPIO99_GPIO,
+};
+
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+	{
+		.pixclock		= 38000,
+		.xres			= 480,
+		.yres			= 640,
+		.bpp			= 16,
+		.hsync_len		= 8,
+		.left_margin		= 8,
+		.right_margin		= 8,
+		.vsync_len		= 2,
+		.upper_margin		= 4,
+		.lower_margin		= 5,
+		.sync			= 0,
+	},
+};
+
+static struct pxafb_mach_info balloon3_lcd_screen = {
+	.modes			= balloon3_lcd_modes,
+	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void balloon3_backlight_power(int on)
+{
+	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static void __init balloon3_lcd_init(void)
+{
+	int ret;
+
+	if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
+		return;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+
+	ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
+	if (ret) {
+		pr_err("Requesting BKL-ON GPIO failed!\n");
+		goto err;
+	}
+
+	ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+	if (ret) {
+		pr_err("Setting BKL-ON GPIO direction failed!\n");
+		goto err2;
+	}
+
+	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
+	pxa_set_fb_info(NULL, &balloon3_lcd_screen);
+	return;
+
+err2:
+	gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
+err:
+	return;
+}
+#else
+static inline void balloon3_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static unsigned long balloon3_mmc_pin_config[] __initdata = {
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+};
+
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+	.detect_delay_ms	= 200,
+};
+
+static void __init balloon3_mmc_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
+	pxa_set_mci_info(&balloon3_mci_platform_data);
+}
+#else
+static inline void balloon3_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
+static void balloon3_udc_command(int cmd)
+{
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+		UP2OCR &= ~UP2OCR_DPPUE;
+}
+
+static int balloon3_udc_is_connected(void)
+{
+	return 1;
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
+	.udc_command		= balloon3_udc_command,
+	.udc_is_connected	= balloon3_udc_is_connected,
+	.gpio_pullup		= -1,
+};
+
+static void __init balloon3_udc_init(void)
+{
+	pxa_set_udc_info(&balloon3_udc_info);
+}
+#else
+static inline void balloon3_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+	.transceiver_cap	= IR_FIRMODE | IR_SIRMODE | IR_OFF,
+};
+
+static void __init balloon3_irda_init(void)
+{
+	pxa_set_ficp_info(&balloon3_ficp_platform_data);
+}
+#else
+static inline void balloon3_irda_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static unsigned long balloon3_uhc_pin_config[] __initdata = {
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+};
+
+static struct pxaohci_platform_data balloon3_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init balloon3_uhc_init(void)
+{
+	if (!balloon3_has(BALLOON3_FEATURE_OHCI))
+		return;
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config));
+	pxa_set_ohci_info(&balloon3_ohci_info);
+}
+#else
+static inline void balloon3_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static unsigned long balloon3_led_pin_config[] __initdata = {
+	GPIO9_GPIO,	/* NAND activity LED */
+	GPIO10_GPIO,	/* Heartbeat LED */
+};
+
+struct gpio_led balloon3_gpio_leds[] = {
+	{
+		.name			= "balloon3:green:idle",
+		.default_trigger	= "heartbeat",
+		.gpio			= BALLOON3_GPIO_LED_IDLE,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:green:nand",
+		.default_trigger	= "nand-disk",
+		.gpio			= BALLOON3_GPIO_LED_NAND,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data balloon3_gpio_led_info = {
+	.leds		= balloon3_gpio_leds,
+	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3_leds = {
+	.name	= "leds-gpio",
+	.id	= 0,
+	.dev	= {
+		.platform_data	= &balloon3_gpio_led_info,
+	}
+};
+
+struct gpio_led balloon3_pcf_gpio_leds[] = {
+	{
+		.name			= "balloon3:green:led0",
+		.gpio			= BALLOON3_PCF_GPIO_LED0,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:green:led1",
+		.gpio			= BALLOON3_PCF_GPIO_LED1,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led2",
+		.gpio			= BALLOON3_PCF_GPIO_LED2,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led3",
+		.gpio			= BALLOON3_PCF_GPIO_LED3,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led4",
+		.gpio			= BALLOON3_PCF_GPIO_LED4,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led5",
+		.gpio			= BALLOON3_PCF_GPIO_LED5,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:red:led6",
+		.gpio			= BALLOON3_PCF_GPIO_LED6,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:red:led7",
+		.gpio			= BALLOON3_PCF_GPIO_LED7,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
+	.leds		= balloon3_pcf_gpio_leds,
+	.num_leds	= ARRAY_SIZE(balloon3_pcf_gpio_leds),
+};
+
+static struct platform_device balloon3_pcf_leds = {
+	.name	= "leds-gpio",
+	.id	= 1,
+	.dev	= {
+		.platform_data	= &balloon3_pcf_gpio_led_info,
+	}
+};
+
+static void __init balloon3_leds_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config));
+	platform_device_register(&balloon3_leds);
+	platform_device_register(&balloon3_pcf_leds);
+}
+#else
+static inline void balloon3_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * FPGA IRQ
+ ******************************************************************************/
+static void balloon3_mask_irq(struct irq_data *d)
+{
+	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled &= ~(1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static void balloon3_unmask_irq(struct irq_data *d)
+{
+	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled |= (1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static struct irq_chip balloon3_irq_chip = {
+	.name		= "FPGA",
+	.irq_ack	= balloon3_mask_irq,
+	.irq_mask	= balloon3_mask_irq,
+	.irq_unmask	= balloon3_unmask_irq,
+};
+
+static void balloon3_irq_handler(struct irq_desc *desc)
+{
+	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+					balloon3_irq_enabled;
+	do {
+		struct irq_data *d = irq_desc_get_irq_data(desc);
+		struct irq_chip *chip = irq_desc_get_chip(desc);
+		unsigned int irq;
+
+		/* clear useless edge notification */
+		if (chip->irq_ack)
+			chip->irq_ack(d);
+
+		while (pending) {
+			irq = BALLOON3_IRQ(0) + __ffs(pending);
+			generic_handle_irq(irq);
+			pending &= pending - 1;
+		}
+		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+				balloon3_irq_enabled;
+	} while (pending);
+}
+
+static void __init balloon3_init_irq(void)
+{
+	int irq;
+
+	pxa27x_init_irq();
+	/* setup extra Balloon3 irqs */
+	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
+		irq_set_chip_and_handler(irq, &balloon3_irq_chip,
+					 handle_level_irq);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+	}
+
+	irq_set_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
+	irq_set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
+
+	pr_debug("%s: chained handler installed - irq %d automatically "
+		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
+}
+
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
+static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
+	.gpio_base	= BALLOON3_PCF_GPIO_BASE,
+	.n_latch	= 0,
+	.setup		= NULL,
+	.teardown	= NULL,
+	.context	= NULL,
+};
+
+static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("pcf8574a", 0x38),
+		.platform_data	= &balloon3_pcf857x_pdata,
+	},
+};
+
+static void __init balloon3_i2c_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
+}
+#else
+static inline void balloon3_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * NAND
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd_to_nand(mtd);
+	uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if (ctrl & NAND_CLE)
+			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE;
+		else
+			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE;
+
+		if (ctrl & NAND_ALE)
+			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE;
+		else
+			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE;
+
+		if (balloon3_ctl_clr)
+			__raw_writel(balloon3_ctl_clr,
+				BALLOON3_NAND_CONTROL_REG);
+		if (balloon3_ctl_set)
+			__raw_writel(balloon3_ctl_set,
+				BALLOON3_NAND_CONTROL_REG +
+				BALLOON3_FPGA_SETnCLR);
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+}
+
+static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	if (chip < 0 || chip > 3)
+		return;
+
+	/* Assert all nCE lines */
+	__raw_writew(
+		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
+		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
+
+	/* Deassert correct nCE line */
+	__raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
+		BALLOON3_NAND_CONTROL_REG);
+}
+
+static int balloon3_nand_dev_ready(struct mtd_info *mtd)
+{
+	return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
+}
+
+static int balloon3_nand_probe(struct platform_device *pdev)
+{
+	uint16_t ver;
+	int ret;
+
+	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
+		BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR);
+
+	ver = __raw_readw(BALLOON3_FPGA_VER);
+	if (ver < 0x4f08)
+		pr_warn("The FPGA code, version 0x%04x, is too old. "
+			"NAND support might be broken in this version!", ver);
+
+	/* Power up the NAND chips */
+	ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
+	if (ret)
+		goto err1;
+
+	ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
+	if (ret)
+		goto err2;
+
+	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
+
+	/* Deassert all nCE lines and write protect line */
+	__raw_writel(
+		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
+		BALLOON3_NAND_CONTROL_FLWP,
+		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
+	return 0;
+
+err2:
+	gpio_free(BALLOON3_GPIO_RUN_NAND);
+err1:
+	return ret;
+}
+
+static void balloon3_nand_remove(struct platform_device *pdev)
+{
+	/* Power down the NAND chips */
+	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
+	gpio_free(BALLOON3_GPIO_RUN_NAND);
+}
+
+static struct mtd_partition balloon3_partition_info[] = {
+	[0] = {
+		.name	= "Boot",
+		.offset	= 0,
+		.size	= SZ_4M,
+	},
+	[1] = {
+		.name	= "RootFS",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+struct platform_nand_data balloon3_nand_pdata = {
+	.chip = {
+		.nr_chips	= 4,
+		.chip_offset	= 0,
+		.nr_partitions	= ARRAY_SIZE(balloon3_partition_info),
+		.partitions	= balloon3_partition_info,
+		.chip_delay	= 50,
+	},
+	.ctrl = {
+		.hwcontrol	= 0,
+		.dev_ready	= balloon3_nand_dev_ready,
+		.select_chip	= balloon3_nand_select_chip,
+		.cmd_ctrl	= balloon3_nand_cmd_ctl,
+		.probe		= balloon3_nand_probe,
+		.remove		= balloon3_nand_remove,
+	},
+};
+
+static struct resource balloon3_nand_resource[] = {
+	[0] = {
+		.start = BALLOON3_NAND_BASE,
+		.end   = BALLOON3_NAND_BASE + 0x4,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device balloon3_nand = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(balloon3_nand_resource),
+	.resource	= balloon3_nand_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &balloon3_nand_pdata,
+	}
+};
+
+static void __init balloon3_nand_init(void)
+{
+	platform_device_register(&balloon3_nand);
+}
+#else
+static inline void balloon3_nand_init(void) {}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
+	REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data balloon3_max1587a_v3_info = {
+	.constraints = {
+		.name		= "vcc_core range",
+		.min_uV		= 900000,
+		.max_uV		= 1705000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.consumer_supplies	= balloon3_max1587a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(balloon3_max1587a_consumers),
+};
+
+static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
+	{
+		.name		= "vcc_core",
+		.id		= MAX1586_V3,
+		.platform_data	= &balloon3_max1587a_v3_info,
+	}
+};
+
+static struct max1586_platform_data balloon3_max1587a_info = {
+	.subdevs     = balloon3_max1587a_subdevs,
+	.num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
+	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data	= &balloon3_max1587a_info,
+	},
+};
+
+static void __init balloon3_pmic_init(void)
+{
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
+}
+#else
+static inline void balloon3_pmic_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init balloon3_init(void)
+{
+	ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	balloon3_i2c_init();
+	balloon3_irda_init();
+	balloon3_lcd_init();
+	balloon3_leds_init();
+	balloon3_mmc_init();
+	balloon3_nand_init();
+	balloon3_nor_init();
+	balloon3_pmic_init();
+	balloon3_ts_init();
+	balloon3_udc_init();
+	balloon3_uhc_init();
+	balloon3_cf_init();
+}
+
+static struct map_desc balloon3_io_desc[] __initdata = {
+	{	/* CPLD/FPGA */
+		.virtual	= (unsigned long)BALLOON3_FPGA_VIRT,
+		.pfn		= __phys_to_pfn(BALLOON3_FPGA_PHYS),
+		.length		= BALLOON3_FPGA_LENGTH,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init balloon3_map_io(void)
+{
+	pxa27x_map_io();
+	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
+}
+
+MACHINE_START(BALLOON3, "Balloon3")
+	/* Maintainer: Nick Bane. */
+	.map_io		= balloon3_map_io,
+	.nr_irqs	= BALLOON3_NR_IRQS,
+	.init_irq	= balloon3_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine	= balloon3_init,
+	.atag_offset	= 0x100,
+	.restart	= pxa_restart,
+MACHINE_END

arch/arm/mach-pxa/capc7117.c

@@ -0,0 +1,162 @@
+/*
+ * linux/arch/arm/mach-pxa/capc7117.c
+ *
+ * Support for the Embedian CAPC-7117 Evaluation Kit
+ * based on the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ *             rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ *             Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ *             rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa320.h"
+#include "mxm8x10.h"
+
+#include "generic.h"
+
+/* IDE (PATA) Support */
+static struct pata_platform_info pata_platform_data = {
+	.ioport_shift = 1
+};
+
+static struct resource capc7117_ide_resources[] = {
+	[0] = {
+	       .start = 0x11000020,
+	       .end = 0x1100003f,
+	       .flags = IORESOURCE_MEM
+	},
+	[1] = {
+	       .start = 0x1100001c,
+	       .end = 0x1100001c,
+	       .flags = IORESOURCE_MEM
+	},
+	[2] = {
+	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
+	}
+};
+
+static struct platform_device capc7117_ide_device = {
+	.name = "pata_platform",
+	.num_resources = ARRAY_SIZE(capc7117_ide_resources),
+	.resource = capc7117_ide_resources,
+	.dev = {
+		.platform_data = &pata_platform_data,
+		.coherent_dma_mask = ~0		/* grumble */
+	}
+};
+
+static void __init capc7117_ide_init(void)
+{
+	platform_device_register(&capc7117_ide_device);
+}
+
+/* TI16C752 UART support */
+#define	TI16C752_FLAGS		(UPF_BOOT_AUTOCONF | \
+					UPF_IOREMAP | \
+					UPF_BUGGY_UART | \
+					UPF_SKIP_TEST)
+#define	TI16C752_UARTCLK	(22118400)
+static struct plat_serial8250_port ti16c752_platform_data[] = {
+	[0] = {
+	       .mapbase = 0x14000000,
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[1] = {
+	       .mapbase = 0x14000040,
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[2] = {
+	       .mapbase = 0x14000080,
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[3] = {
+	       .mapbase = 0x140000c0,
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[4] = {
+	       /* end of array */
+	}
+};
+
+static struct platform_device ti16c752_device = {
+	.name = "serial8250",
+	.id = PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data = ti16c752_platform_data
+	}
+};
+
+static void __init capc7117_uarts_init(void)
+{
+	platform_device_register(&ti16c752_device);
+}
+
+static void __init capc7117_init(void)
+{
+	/* Init CoM */
+	mxm_8x10_barebones_init();
+
+	/* Init evaluation board peripherals */
+	mxm_8x10_ac97_init();
+	mxm_8x10_usb_host_init();
+	mxm_8x10_mmc_init();
+
+	capc7117_uarts_init();
+	capc7117_ide_init();
+
+	regulator_has_full_constraints();
+}
+
+MACHINE_START(CAPC7117,
+	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
+	.atag_offset = 0x100,
+	.map_io = pxa3xx_map_io,
+	.nr_irqs = PXA_NR_IRQS,
+	.init_irq = pxa3xx_init_irq,
+	.handle_irq = pxa3xx_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine = capc7117_init,
+	.restart	= pxa_restart,
+MACHINE_END

arch/arm/mach-pxa/cm-x255.c

@@ -0,0 +1,236 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x255.c
+ *
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand-gpio.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include "pxa25x.h"
+
+#include "generic.h"
+
+#define GPIO_NAND_CS	(5)
+#define GPIO_NAND_ALE	(4)
+#define GPIO_NAND_CLE	(3)
+#define GPIO_NAND_RB	(10)
+
+static unsigned long cmx255_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP2 */
+	GPIO81_SSP2_CLK_OUT,
+	GPIO82_SSP2_FRM_OUT,
+	GPIO83_SSP2_TXD,
+	GPIO84_SSP2_RXD,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
+	GPIO9_GPIO,				/* PC card reset */
+
+	/* NAND controls */
+	GPIO5_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO4_GPIO	| MFP_LPM_DRIVE_LOW,	/* NAND ALE */
+	GPIO3_GPIO	| MFP_LPM_DRIVE_LOW,	/* NAND CLE */
+	GPIO10_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO22_GPIO,	/* DM9000 interrupt */
+};
+
+#if defined(CONFIG_SPI_PXA2XX)
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.num_chipselect	= 1,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "rtc-max6902",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+	},
+};
+
+static void __init cmx255_init_rtc(void)
+{
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+	spi_register_board_info(ARRAY_AND_SIZE(spi_board_info));
+}
+#else
+static inline void cmx255_init_rtc(void) {}
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition cmx255_nor_partitions[] = {
+	{
+		.name		= "ARMmon",
+		.size		= 0x00030000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	} , {
+		.name		= "ARMmon setup block",
+		.size		= 0x00010000,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	} , {
+		.name		= "kernel",
+		.size		= 0x00160000,
+		.offset		= MTDPART_OFS_APPEND,
+	} , {
+		.name		= "ramdisk",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND
+	}
+};
+
+static struct physmap_flash_data cmx255_nor_flash_data[] = {
+	{
+		.width		= 2,	/* bankwidth in bytes */
+		.parts		= cmx255_nor_partitions,
+		.nr_parts	= ARRAY_SIZE(cmx255_nor_partitions)
+	}
+};
+
+static struct resource cmx255_nor_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_8M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device cmx255_nor = {
+	.name	= "physmap-flash",
+	.id	= -1,
+	.dev	= {
+		.platform_data = cmx255_nor_flash_data,
+	},
+	.resource = &cmx255_nor_resource,
+	.num_resources = 1,
+};
+
+static void __init cmx255_init_nor(void)
+{
+	platform_device_register(&cmx255_nor);
+}
+#else
+static inline void cmx255_init_nor(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+static struct resource cmx255_nand_resource[] = {
+	[0] = {
+		.start = PXA_CS1_PHYS,
+		.end   = PXA_CS1_PHYS + 11,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = PXA_CS5_PHYS,
+		.end   = PXA_CS5_PHYS + 3,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition cmx255_nand_parts[] = {
+	[0] = {
+		.name	= "cmx255-nand",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= 0,
+	},
+};
+
+static struct gpio_nand_platdata cmx255_nand_platdata = {
+	.gpio_nce = GPIO_NAND_CS,
+	.gpio_cle = GPIO_NAND_CLE,
+	.gpio_ale = GPIO_NAND_ALE,
+	.gpio_rdy = GPIO_NAND_RB,
+	.gpio_nwp = -1,
+	.parts = cmx255_nand_parts,
+	.num_parts = ARRAY_SIZE(cmx255_nand_parts),
+	.chip_delay = 25,
+};
+
+static struct platform_device cmx255_nand = {
+	.name		= "gpio-nand",
+	.num_resources	= ARRAY_SIZE(cmx255_nand_resource),
+	.resource	= cmx255_nand_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx255_nand_platdata,
+	}
+};
+
+static void __init cmx255_init_nand(void)
+{
+	platform_device_register(&cmx255_nand);
+}
+#else
+static inline void cmx255_init_nand(void) {}
+#endif
+
+void __init cmx255_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config));
+
+	cmx255_init_rtc();
+	cmx255_init_nor();
+	cmx255_init_nand();
+}

arch/arm/mach-pxa/cm-x2xx-pci.c

@@ -0,0 +1,199 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x2xx-pci.c
+ *
+ * PCI bios-type initialisation for PCI machines
+ *
+ * Bits taken from various places.
+ *
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+#include <asm/hardware/it8152.h>
+
+void __iomem *it8152_base_address;
+static int cmx2xx_it8152_irq_gpio;
+
+static void cmx2xx_it8152_irq_demux(struct irq_desc *desc)
+{
+	/* clear our parent irq */
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
+
+	it8152_irq_demux(desc);
+}
+
+void __cmx2xx_pci_init_irq(int irq_gpio)
+{
+	it8152_init_irq();
+
+	cmx2xx_it8152_irq_gpio = irq_gpio;
+
+	irq_set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
+
+	irq_set_chained_handler(gpio_to_irq(irq_gpio),
+				cmx2xx_it8152_irq_demux);
+}
+
+#ifdef CONFIG_PM
+static unsigned long sleep_save_ite[10];
+
+void __cmx2xx_pci_suspend(void)
+{
+	/* save ITE state */
+	sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
+	sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR);
+	sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR);
+
+	/* Clear ITE IRQ's */
+	__raw_writel((0), IT8152_INTC_PDCNIRR);
+	__raw_writel((0), IT8152_INTC_LPCNIRR);
+}
+
+void __cmx2xx_pci_resume(void)
+{
+	/* restore IT8152 state */
+	__raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
+	__raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR);
+	__raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
+}
+#else
+void cmx2xx_pci_suspend(void) {}
+void cmx2xx_pci_resume(void) {}
+#endif
+
+/* PCI IRQ mapping*/
+static int __init cmx2xx_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin);
+
+	irq = it8152_pci_map_irq(dev, slot, pin);
+	if (irq)
+		return irq;
+
+	/*
+	  Here comes the ugly part. The routing is baseboard specific,
+	  but defining a platform for each possible base of CM-X2XX is
+	  unrealistic. Here we keep mapping for ATXBase and SB-X2XX.
+	*/
+	/* ATXBASE PCI slot */
+	if (slot == 7)
+		return IT8152_PCI_INTA;
+
+	/* ATXBase/SB-X2XX CardBus */
+	if (slot == 8 || slot == 0)
+		return IT8152_PCI_INTB;
+
+	/* ATXBase Ethernet */
+	if (slot == 9)
+		return IT8152_PCI_INTA;
+
+	/* CM-x255 Onboard Ethernet */
+	if (slot == 15)
+		return IT8152_PCI_INTC;
+
+	/* SB-x2xx Ethernet */
+	if (slot == 16)
+		return IT8152_PCI_INTA;
+
+	/* PC104+ interrupt routing */
+	if ((slot == 17) || (slot == 19))
+		return IT8152_PCI_INTA;
+	if ((slot == 18) || (slot == 20))
+		return IT8152_PCI_INTB;
+
+	return(0);
+}
+
+static void cmx2xx_pci_preinit(void)
+{
+	pr_info("Initializing CM-X2XX PCI subsystem\n");
+
+	pcibios_min_io = 0;
+	pcibios_min_mem = 0;
+
+	__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
+	if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
+		pr_info("PCI Bridge found.\n");
+
+		/* set PCI I/O base at 0 */
+		writel(0x848, IT8152_PCI_CFG_ADDR);
+		writel(0, IT8152_PCI_CFG_DATA);
+
+		/* set PCI memory base at 0 */
+		writel(0x840, IT8152_PCI_CFG_ADDR);
+		writel(0, IT8152_PCI_CFG_DATA);
+
+		writel(0x20, IT8152_GPIO_GPDR);
+
+		/* CardBus Controller on ATXbase baseboard */
+		writel(0x4000, IT8152_PCI_CFG_ADDR);
+		if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
+			pr_info("CardBus Bridge found.\n");
+
+			/* Configure socket 0 */
+			writel(0x408C, IT8152_PCI_CFG_ADDR);
+			writel(0x1022, IT8152_PCI_CFG_DATA);
+
+			writel(0x4080, IT8152_PCI_CFG_ADDR);
+			writel(0x3844d060, IT8152_PCI_CFG_DATA);
+
+			writel(0x4090, IT8152_PCI_CFG_ADDR);
+			writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
+				0x60440000),
+			       IT8152_PCI_CFG_DATA);
+
+			writel(0x4018, IT8152_PCI_CFG_ADDR);
+			writel(0xb0000000, IT8152_PCI_CFG_DATA);
+
+			/* Configure socket 1 */
+			writel(0x418C, IT8152_PCI_CFG_ADDR);
+			writel(0x1022, IT8152_PCI_CFG_DATA);
+
+			writel(0x4180, IT8152_PCI_CFG_ADDR);
+			writel(0x3844d060, IT8152_PCI_CFG_DATA);
+
+			writel(0x4190, IT8152_PCI_CFG_ADDR);
+			writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
+				0x60440000),
+			       IT8152_PCI_CFG_DATA);
+
+			writel(0x4118, IT8152_PCI_CFG_ADDR);
+			writel(0xb0000000, IT8152_PCI_CFG_DATA);
+		}
+	}
+}
+
+static struct hw_pci cmx2xx_pci __initdata = {
+	.map_irq	= cmx2xx_pci_map_irq,
+	.nr_controllers	= 1,
+	.ops		= &it8152_ops,
+	.setup		= it8152_pci_setup,
+	.preinit	= cmx2xx_pci_preinit,
+};
+
+static int __init cmx2xx_init_pci(void)
+{
+	if (machine_is_armcore())
+		pci_common_init(&cmx2xx_pci);
+
+	return 0;
+}
+
+subsys_initcall(cmx2xx_init_pci);

arch/arm/mach-pxa/cm-x2xx-pci.h

@@ -0,0 +1,13 @@
+extern void __cmx2xx_pci_init_irq(int irq_gpio);
+extern void __cmx2xx_pci_suspend(void);
+extern void __cmx2xx_pci_resume(void);
+
+#ifdef CONFIG_PCI
+#define cmx2xx_pci_init_irq(x) __cmx2xx_pci_init_irq(x)
+#define cmx2xx_pci_suspend(x) __cmx2xx_pci_suspend(x)
+#define cmx2xx_pci_resume(x) __cmx2xx_pci_resume(x)
+#else
+#define cmx2xx_pci_init_irq(x) do {} while (0)
+#define cmx2xx_pci_suspend(x) do {} while (0)
+#define cmx2xx_pci_resume(x) do {} while (0)
+#endif

arch/arm/mach-pxa/cm-x300.c

@@ -0,0 +1,868 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x300.c
+ *
+ * Support for the CompuLab CM-X300 modules
+ *
+ * Copyright (C) 2008,2009 CompuLab Ltd.
+ *
+ * Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <linux/gpio.h>
+#include <linux/dm9000.h>
+#include <linux/leds.h>
+#include <linux/platform_data/rtc-v3020.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+
+#include <linux/i2c.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/i2c/pxa-i2c.h>
+
+#include <linux/mfd/da903x.h>
+#include <linux/regulator/machine.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/tdo24m.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include <asm/system_info.h>
+
+#include "pxa300.h"
+#include "pxa27x-udc.h"
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
+#include <mach/audio.h>
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
+
+#include <asm/mach/map.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#define CM_X300_ETH_PHYS	0x08000010
+
+#define GPIO82_MMC_IRQ		(82)
+#define GPIO85_MMC_WP		(85)
+
+#define	CM_X300_MMC_IRQ		PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
+
+#define GPIO95_RTC_CS		(95)
+#define GPIO96_RTC_WR		(96)
+#define GPIO97_RTC_RD		(97)
+#define GPIO98_RTC_IO		(98)
+
+#define GPIO_ULPI_PHY_RST	(127)
+
+static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
+	/* LCD */
+	GPIO54_LCD_LDD_0,
+	GPIO55_LCD_LDD_1,
+	GPIO56_LCD_LDD_2,
+	GPIO57_LCD_LDD_3,
+	GPIO58_LCD_LDD_4,
+	GPIO59_LCD_LDD_5,
+	GPIO60_LCD_LDD_6,
+	GPIO61_LCD_LDD_7,
+	GPIO62_LCD_LDD_8,
+	GPIO63_LCD_LDD_9,
+	GPIO64_LCD_LDD_10,
+	GPIO65_LCD_LDD_11,
+	GPIO66_LCD_LDD_12,
+	GPIO67_LCD_LDD_13,
+	GPIO68_LCD_LDD_14,
+	GPIO69_LCD_LDD_15,
+	GPIO72_LCD_FCLK,
+	GPIO73_LCD_LCLK,
+	GPIO74_LCD_PCLK,
+	GPIO75_LCD_BIAS,
+
+	/* BTUART */
+	GPIO111_UART2_RTS,
+	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
+	GPIO113_UART2_TXD,
+	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
+
+	/* STUART */
+	GPIO109_UART3_TXD,
+	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
+
+	/* AC97 */
+	GPIO23_AC97_nACRESET,
+	GPIO24_AC97_SYSCLK,
+	GPIO29_AC97_BITCLK,
+	GPIO25_AC97_SDATA_IN_0,
+	GPIO27_AC97_SDATA_OUT,
+	GPIO28_AC97_SYNC,
+
+	/* Keypad */
+	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
+	GPIO121_KP_MKOUT_0,
+	GPIO122_KP_MKOUT_1,
+	GPIO123_KP_MKOUT_2,
+	GPIO124_KP_MKOUT_3,
+	GPIO125_KP_MKOUT_4,
+	GPIO4_2_KP_MKOUT_5,
+
+	/* MMC1 */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
+
+	/* MMC2 */
+	GPIO9_MMC2_DAT0,
+	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO11_MMC2_DAT2,
+	GPIO12_MMC2_DAT3,
+	GPIO13_MMC2_CLK,
+	GPIO14_MMC2_CMD,
+
+	/* FFUART */
+	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
+	GPIO31_UART1_TXD,
+	GPIO32_UART1_CTS,
+	GPIO37_UART1_RTS,
+	GPIO33_UART1_DCD,
+	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
+	GPIO35_UART1_RI,
+	GPIO36_UART1_DTR,
+
+	/* GPIOs */
+	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
+	GPIO85_GPIO,			/* MMC WP */
+	GPIO99_GPIO,			/* Ethernet IRQ */
+
+	/* RTC GPIOs */
+	GPIO95_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC CS */
+	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC WR */
+	GPIO97_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC RD */
+	GPIO98_GPIO,				/* RTC IO */
+
+	/* Standard I2C */
+	GPIO21_I2C_SCL,
+	GPIO22_I2C_SDA,
+
+	/* PWM Backlight */
+	GPIO19_PWM2_OUT,
+};
+
+static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
+	/* GPIOs */
+	GPIO79_GPIO,			/* LED */
+	GPIO77_GPIO,			/* WiFi reset */
+	GPIO78_GPIO,			/* BT reset */
+};
+
+static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
+	/* GPIOs */
+	GPIO76_GPIO,			/* LED */
+	GPIO71_GPIO,			/* WiFi reset */
+	GPIO70_GPIO,			/* BT reset */
+};
+
+static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
+	/* USB PORT 2 */
+	ULPI_STP,
+	ULPI_NXT,
+	ULPI_DIR,
+	GPIO30_ULPI_DATA_OUT_0,
+	GPIO31_ULPI_DATA_OUT_1,
+	GPIO32_ULPI_DATA_OUT_2,
+	GPIO33_ULPI_DATA_OUT_3,
+	GPIO34_ULPI_DATA_OUT_4,
+	GPIO35_ULPI_DATA_OUT_5,
+	GPIO36_ULPI_DATA_OUT_6,
+	GPIO37_ULPI_DATA_OUT_7,
+	GPIO38_ULPI_CLK,
+	/* external PHY reset pin */
+	GPIO127_GPIO,
+
+	/* USB PORT 3 */
+	GPIO77_USB_P3_1,
+	GPIO78_USB_P3_2,
+	GPIO79_USB_P3_3,
+	GPIO80_USB_P3_4,
+	GPIO81_USB_P3_5,
+	GPIO82_USB_P3_6,
+	GPIO0_2_USBH_PEN,
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= CM_X300_ETH_PHYS,
+		.end	= CM_X300_ETH_PHYS + 0x3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= CM_X300_ETH_PHYS + 0x4,
+		.end	= CM_X300_ETH_PHYS + 0x4 + 500,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
+		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct dm9000_plat_data cm_x300_dm9000_platdata = {
+	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+	.dev		= {
+		.platform_data = &cm_x300_dm9000_platdata,
+	}
+
+};
+
+static void __init cm_x300_init_dm9000(void)
+{
+	platform_device_register(&dm9000_device);
+}
+#else
+static inline void cm_x300_init_dm9000(void) {}
+#endif
+
+/* LCD */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info cm_x300_lcd_modes[] = {
+	[0] = {
+		.pixclock	= 38250,
+		.bpp		= 16,
+		.xres		= 480,
+		.yres		= 640,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 2,
+		.right_margin	= 24,
+		.lower_margin	= 4,
+		.cmap_greyscale	= 0,
+	},
+	[1] = {
+		.pixclock	= 153800,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 2,
+		.right_margin	= 88,
+		.lower_margin	= 2,
+		.cmap_greyscale	= 0,
+	},
+};
+
+static struct pxafb_mach_info cm_x300_lcd = {
+	.modes			= cm_x300_lcd_modes,
+	.num_modes		= ARRAY_SIZE(cm_x300_lcd_modes),
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init cm_x300_init_lcd(void)
+{
+	pxa_set_fb_info(NULL, &cm_x300_lcd);
+}
+#else
+static inline void cm_x300_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup cm_x300_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000,
+		   PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data cm_x300_backlight_data = {
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	.enable_gpio	= -1,
+};
+
+static struct platform_device cm_x300_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent = &pxa27x_device_pwm0.dev,
+		.platform_data	= &cm_x300_backlight_data,
+	},
+};
+
+static void cm_x300_init_bl(void)
+{
+	pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup));
+	platform_device_register(&cm_x300_backlight_device);
+}
+#else
+static inline void cm_x300_init_bl(void) {}
+#endif
+
+#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
+#define GPIO_LCD_BASE	(144)
+#define GPIO_LCD_DIN	(GPIO_LCD_BASE + 8)	/* aux_gpio3_0 */
+#define GPIO_LCD_DOUT	(GPIO_LCD_BASE + 9)	/* aux_gpio3_1 */
+#define GPIO_LCD_SCL	(GPIO_LCD_BASE + 10)	/* aux_gpio3_2 */
+#define GPIO_LCD_CS	(GPIO_LCD_BASE + 11)	/* aux_gpio3_3 */
+#define LCD_SPI_BUS_NUM	(1)
+
+static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
+	.sck		= GPIO_LCD_SCL,
+	.mosi		= GPIO_LCD_DIN,
+	.miso		= GPIO_LCD_DOUT,
+	.num_chipselect	= 1,
+};
+
+static struct platform_device cm_x300_spi_gpio = {
+	.name		= "spi_gpio",
+	.id		= LCD_SPI_BUS_NUM,
+	.dev		= {
+		.platform_data	= &cm_x300_spi_gpio_pdata,
+	},
+};
+
+static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
+	.model = TDO35S,
+};
+
+static struct spi_board_info cm_x300_spi_devices[] __initdata = {
+	{
+		.modalias		= "tdo24m",
+		.max_speed_hz		= 1000000,
+		.bus_num		= LCD_SPI_BUS_NUM,
+		.chip_select		= 0,
+		.controller_data	= (void *) GPIO_LCD_CS,
+		.platform_data		= &cm_x300_tdo24m_pdata,
+	},
+};
+
+static void __init cm_x300_init_spi(void)
+{
+	spi_register_board_info(cm_x300_spi_devices,
+				ARRAY_SIZE(cm_x300_spi_devices));
+	platform_device_register(&cm_x300_spi_gpio);
+}
+#else
+static inline void cm_x300_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static void __init cm_x300_init_ac97(void)
+{
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cm_x300_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition cm_x300_nand_partitions[] = {
+	[0] = {
+		.name        = "OBM",
+		.offset      = 0,
+		.size        = SZ_256K,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "U-Boot",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_256K,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Environment",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_256K,
+	},
+	[3] = {
+		.name        = "reserved",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_256K + SZ_1M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[4] = {
+		.name        = "kernel",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_4M,
+	},
+	[5] = {
+		.name        = "fs",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
+	.enable_arbiter	= 1,
+	.keep_config	= 1,
+	.num_cs		= 1,
+	.parts[0]	= cm_x300_nand_partitions,
+	.nr_parts[0]	= ARRAY_SIZE(cm_x300_nand_partitions),
+};
+
+static void __init cm_x300_init_nand(void)
+{
+	pxa3xx_set_nand_info(&cm_x300_nand_info);
+}
+#else
+static inline void cm_x300_init_nand(void) {}
+#endif
+
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+	.detect_delay_ms	= 200,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO82_MMC_IRQ,
+	.gpio_card_ro		= GPIO85_MMC_WP,
+	.gpio_power		= -1,
+};
+
+/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
+   no detection/ro pins */
+static int cm_x300_mci2_init(struct device *dev,
+			     irq_handler_t cm_x300_detect_int,
+	void *data)
+{
+	return 0;
+}
+
+static void cm_x300_mci2_exit(struct device *dev, void *data)
+{
+}
+
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
+	.detect_delay_ms	= 200,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= cm_x300_mci2_init,
+	.exit			= cm_x300_mci2_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+};
+
+static void __init cm_x300_init_mmc(void)
+{
+	pxa_set_mci_info(&cm_x300_mci_platform_data);
+	pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
+}
+#else
+static inline void cm_x300_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_PXA310_ULPI)
+static struct clk *pout_clk;
+
+static int cm_x300_ulpi_phy_reset(void)
+{
+	int err;
+
+	/* reset the PHY */
+	err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW,
+			       "ulpi reset");
+	if (err) {
+		pr_err("failed to request ULPI reset GPIO: %d\n", err);
+		return err;
+	}
+
+	msleep(10);
+	gpio_set_value(GPIO_ULPI_PHY_RST, 1);
+	msleep(10);
+
+	gpio_free(GPIO_ULPI_PHY_RST);
+
+	return 0;
+}
+
+static inline int cm_x300_u2d_init(struct device *dev)
+{
+	int err = 0;
+
+	if (cpu_is_pxa310()) {
+		/* CLK_POUT is connected to the ULPI PHY */
+		pout_clk = clk_get(NULL, "CLK_POUT");
+		if (IS_ERR(pout_clk)) {
+			err = PTR_ERR(pout_clk);
+			pr_err("failed to get CLK_POUT: %d\n", err);
+			return err;
+		}
+		clk_enable(pout_clk);
+
+		err = cm_x300_ulpi_phy_reset();
+		if (err) {
+			clk_disable(pout_clk);
+			clk_put(pout_clk);
+		}
+	}
+
+	return err;
+}
+
+static void cm_x300_u2d_exit(struct device *dev)
+{
+	if (cpu_is_pxa310()) {
+		clk_disable(pout_clk);
+		clk_put(pout_clk);
+	}
+}
+
+static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
+	.ulpi_mode	= ULPI_SER_6PIN,
+	.init		= cm_x300_u2d_init,
+	.exit		= cm_x300_u2d_exit,
+};
+
+static void cm_x300_init_u2d(void)
+{
+	pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
+}
+#else
+static inline void cm_x300_init_u2d(void) {}
+#endif
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int cm_x300_ohci_init(struct device *dev)
+{
+	if (cpu_is_pxa300())
+		UP2OCR = UP2OCR_HXS
+			| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+	return 0;
+}
+
+static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW,
+	.init		= cm_x300_ohci_init,
+};
+
+static void __init cm_x300_init_ohci(void)
+{
+	pxa_set_ohci_info(&cm_x300_ohci_platform_data);
+}
+#else
+static inline void cm_x300_init_ohci(void) {}
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cm_x300_leds[] = {
+	[0] = {
+		.name = "cm-x300:green",
+		.default_trigger = "heartbeat",
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
+	.num_leds = ARRAY_SIZE(cm_x300_leds),
+	.leds = cm_x300_leds,
+};
+
+static struct platform_device cm_x300_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cm_x300_gpio_led_pdata,
+	},
+};
+
+static void __init cm_x300_init_leds(void)
+{
+	if (system_rev < 130)
+		cm_x300_leds[0].gpio = 79;
+	else
+		cm_x300_leds[0].gpio = 76;
+
+	platform_device_register(&cm_x300_led_device);
+}
+#else
+static inline void cm_x300_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+/* PCA9555 */
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
+	.gpio_base = 128,
+};
+
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
+	.gpio_base = 144,
+};
+
+static struct i2c_board_info cm_x300_gpio_ext_info[] = {
+	[0] = {
+		I2C_BOARD_INFO("pca9555", 0x24),
+		.platform_data = &cm_x300_gpio_ext_pdata_0,
+	},
+	[1] = {
+		I2C_BOARD_INFO("pca9555", 0x25),
+		.platform_data = &cm_x300_gpio_ext_pdata_1,
+	},
+};
+
+static void __init cm_x300_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, cm_x300_gpio_ext_info,
+				ARRAY_SIZE(cm_x300_gpio_ext_info));
+}
+#else
+static inline void cm_x300_init_i2c(void) {}
+#endif
+
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
+struct v3020_platform_data cm_x300_v3020_pdata = {
+	.use_gpio	= 1,
+	.gpio_cs	= GPIO95_RTC_CS,
+	.gpio_wr	= GPIO96_RTC_WR,
+	.gpio_rd	= GPIO97_RTC_RD,
+	.gpio_io	= GPIO98_RTC_IO,
+};
+
+static struct platform_device cm_x300_rtc_device = {
+	.name		= "v3020",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cm_x300_v3020_pdata,
+	}
+};
+
+static void __init cm_x300_init_rtc(void)
+{
+	platform_device_register(&cm_x300_rtc_device);
+}
+#else
+static inline void cm_x300_init_rtc(void) {}
+#endif
+
+/* Battery */
+struct power_supply_info cm_x300_psy_info = {
+	.name = "battery",
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.voltage_max_design = 4200000,
+	.voltage_min_design = 3000000,
+	.use_for_apm = 1,
+};
+
+static void cm_x300_battery_low(void)
+{
+#if defined(CONFIG_APM_EMULATION)
+	apm_queue_event(APM_LOW_BATTERY);
+#endif
+}
+
+static void cm_x300_battery_critical(void)
+{
+#if defined(CONFIG_APM_EMULATION)
+	apm_queue_event(APM_CRITICAL_SUSPEND);
+#endif
+}
+
+struct da9030_battery_info cm_x300_battery_info = {
+	.battery_info = &cm_x300_psy_info,
+
+	.charge_milliamp = 1000,
+	.charge_millivolt = 4200,
+
+	.vbat_low = 3600,
+	.vbat_crit = 3400,
+	.vbat_charge_start = 4100,
+	.vbat_charge_stop = 4200,
+	.vbat_charge_restart = 4000,
+
+	.vcharge_min = 3200,
+	.vcharge_max = 5500,
+
+	.tbat_low = 197,
+	.tbat_high = 78,
+	.tbat_restart = 100,
+
+	.batmon_interval = 0,
+
+	.battery_low = cm_x300_battery_low,
+	.battery_critical = cm_x300_battery_critical,
+};
+
+static struct regulator_consumer_supply buck2_consumers[] = {
+	REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data buck2_data = {
+	.constraints = {
+		.min_uV = 1375000,
+		.max_uV = 1375000,
+		.state_mem = {
+			.enabled = 0,
+		},
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.apply_uV = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(buck2_consumers),
+	.consumer_supplies = buck2_consumers,
+};
+
+/* DA9030 */
+struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
+	{
+		.name = "da903x-battery",
+		.id = DA9030_ID_BAT,
+		.platform_data = &cm_x300_battery_info,
+	},
+	{
+		.name = "da903x-regulator",
+		.id = DA9030_ID_BUCK2,
+		.platform_data = &buck2_data,
+	},
+};
+
+static struct da903x_platform_data cm_x300_da9030_info = {
+	.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
+	.subdevs = cm_x300_da9030_subdevs,
+};
+
+static struct i2c_board_info cm_x300_pmic_info = {
+	I2C_BOARD_INFO("da9030", 0x49),
+	.irq = IRQ_WAKEUP0,
+	.platform_data = &cm_x300_da9030_info,
+};
+
+static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
+	.use_pio = 1,
+};
+
+static void __init cm_x300_init_da9030(void)
+{
+	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
+	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+	irq_set_irq_wake(IRQ_WAKEUP0, 1);
+}
+
+/* wi2wi gpio setting for system_rev >= 130 */
+static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
+	{ 71, GPIOF_OUT_INIT_HIGH, "wlan en" },
+	{ 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
+};
+
+static void __init cm_x300_init_wi2wi(void)
+{
+	int err;
+
+	if (system_rev < 130) {
+		cm_x300_wi2wi_gpios[0].gpio = 77;	/* wlan en */
+		cm_x300_wi2wi_gpios[1].gpio = 78;	/* bt reset */
+	}
+
+	/* Libertas and CSR reset */
+	err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
+	if (err) {
+		pr_err("failed to request wifi/bt gpios: %d\n", err);
+		return;
+	}
+
+	udelay(10);
+	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
+	udelay(10);
+	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
+
+	gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
+}
+
+/* MFP */
+static void __init cm_x300_init_mfp(void)
+{
+	/* board-processor specific GPIO initialization */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
+
+	if (system_rev < 130)
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
+	else
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
+
+	if (cpu_is_pxa310())
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
+}
+
+static void __init cm_x300_init(void)
+{
+	cm_x300_init_mfp();
+
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	if (cpu_is_pxa300())
+		pxa_set_ffuart_info(NULL);
+
+	cm_x300_init_da9030();
+	cm_x300_init_dm9000();
+	cm_x300_init_lcd();
+	cm_x300_init_u2d();
+	cm_x300_init_ohci();
+	cm_x300_init_mmc();
+	cm_x300_init_nand();
+	cm_x300_init_leds();
+	cm_x300_init_i2c();
+	cm_x300_init_spi();
+	cm_x300_init_rtc();
+	cm_x300_init_ac97();
+	cm_x300_init_wi2wi();
+	cm_x300_init_bl();
+
+	regulator_has_full_constraints();
+}
+
+static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
+{
+	/* Make sure that mi->bank[0].start = PHYS_ADDR */
+	for (; tags->hdr.size; tags = tag_next(tags))
+		if (tags->hdr.tag == ATAG_MEM &&
+			tags->u.mem.start == 0x80000000) {
+			tags->u.mem.start = 0xa0000000;
+			break;
+		}
+}
+
+MACHINE_START(CM_X300, "CM-X300 module")
+	.atag_offset	= 0x100,
+	.map_io		= pxa3xx_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
+	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine	= cm_x300_init,
+	.fixup		= cm_x300_fixup,
+	.restart	= pxa_restart,
+MACHINE_END

arch/arm/mach-pxa/colibri-pxa270-income.c

@@ -0,0 +1,229 @@
+/*
+ * linux/arch/arm/mach-pxa/income.c
+ *
+ * Support for Income s.r.o. SH-Dmaster PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Pavel Revak <palo@bielyvlk.sk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/i2c/pxa-i2c.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
+#include <linux/platform_data/video-pxafb.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define GPIO114_INCOME_ETH_IRQ  (114)
+#define GPIO0_INCOME_SD_DETECT  (0)
+#define GPIO0_INCOME_SD_RO      (1)
+#define GPIO54_INCOME_LED_A     (54)
+#define GPIO55_INCOME_LED_B     (55)
+#define GPIO113_INCOME_TS_IRQ   (113)
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data income_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
+	.gpio_card_detect	= GPIO0_INCOME_SD_DETECT,
+	.gpio_card_ro		= GPIO0_INCOME_SD_RO,
+	.detect_delay_ms	= 200,
+};
+
+static void __init income_mmc_init(void)
+{
+	pxa_set_mci_info(&income_mci_platform_data);
+}
+#else
+static inline void income_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data income_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init income_uhc_init(void)
+{
+	pxa_set_ohci_info(&income_ohci_info);
+}
+#else
+static inline void income_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led income_gpio_leds[] = {
+	{
+		.name			= "income:green:leda",
+		.default_trigger	= "none",
+		.gpio			= GPIO54_INCOME_LED_A,
+		.active_low		= 1,
+	},
+	{
+		.name			= "income:green:ledb",
+		.default_trigger	= "none",
+		.gpio			= GPIO55_INCOME_LED_B,
+		.active_low		= 1,
+	}
+};
+
+static struct gpio_led_platform_data income_gpio_led_info = {
+	.leds		= income_gpio_leds,
+	.num_leds	= ARRAY_SIZE(income_gpio_leds),
+};
+
+static struct platform_device income_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &income_gpio_led_info,
+	}
+};
+
+static void __init income_led_init(void)
+{
+	platform_device_register(&income_leds);
+}
+#else
+static inline void income_led_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct i2c_board_info __initdata income_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("ds1340", 0x68),
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4f),
+	},
+};
+
+static void __init income_i2c_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
+}
+#else
+static inline void income_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info income_lcd_modes[] = {
+{
+	.pixclock	= 144700,
+	.xres		= 320,
+	.yres		= 240,
+	.bpp		= 32,
+	.depth		= 18,
+
+	.left_margin	= 10,
+	.right_margin	= 10,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 20,
+	.vsync_len	= 2,
+
+	.sync		= FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info income_lcd_screen = {
+	.modes		= income_lcd_modes,
+	.num_modes	= ARRAY_SIZE(income_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init income_lcd_init(void)
+{
+	pxa_set_fb_info(NULL, &income_lcd_screen);
+}
+#else
+static inline void income_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup income_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+		   PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data income_backlight_data = {
+	.max_brightness	= 0x3ff,
+	.dft_brightness	= 0x1ff,
+	.enable_gpio	= -1,
+};
+
+static struct platform_device income_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &income_backlight_data,
+	},
+};
+
+static void __init income_pwm_init(void)
+{
+	pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup));
+	platform_device_register(&income_backlight);
+}
+#else
+static inline void income_pwm_init(void) {}
+#endif
+
+void __init colibri_pxa270_income_boardinit(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	income_mmc_init();
+	income_uhc_init();
+	income_led_init();
+	income_i2c_init();
+	income_lcd_init();
+	income_pwm_init();
+}
+

arch/arm/mach-pxa/colibri-pxa270.c

@@ -0,0 +1,333 @@
+/*
+ *  linux/arch/arm/mach-pxa/colibri-pxa270.c
+ *
+ *  Support for Toradex PXA270 based Colibri module
+ *  Daniel Mack <daniel@caiaq.de>
+ *  Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/ucb1400.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+
+#include <mach/audio.h>
+#include "colibri.h"
+#include "pxa27x.h"
+
+#include "devices.h"
+#include "generic.h"
+
+/******************************************************************************
+ * Evaluation board MFP
+ ******************************************************************************/
+#ifdef	 CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	GPIO119_USBH2_PWR,
+	GPIO120_USBH2_PEN,
+
+	/* PCMCIA */
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO49_nPWE,
+	GPIO48_nPOE,
+	GPIO57_nIOIS16,
+	GPIO56_nPWAIT,
+	GPIO104_PSKTSEL,
+	GPIO53_GPIO,	/* RESET */
+	GPIO83_GPIO,	/* BVD1 */
+	GPIO82_GPIO,	/* BVD2 */
+	GPIO1_GPIO,	/* READY */
+	GPIO84_GPIO,	/* DETECT */
+	GPIO107_GPIO,	/* PPEN */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+};
+#else
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
+#endif
+
+#ifdef	CONFIG_MACH_COLIBRI_PXA270_INCOME
+static mfp_cfg_t income_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+	GPIO1_GPIO,	/* SD read-only */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* BFUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* LED */
+	GPIO54_GPIO,	/* LED A */
+	GPIO55_GPIO,	/* LED B */
+};
+#else
+static mfp_cfg_t income_pin_config[] __initdata = {};
+#endif
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
+	/* Ethernet */
+	GPIO78_nCS_2,	/* Ethernet CS */
+	GPIO114_GPIO,	/* Ethernet IRQ */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_GPIO,	/* Touchscreen IRQ */
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition colibri_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.offset =	0x00000000,
+		.size =		0x00040000,
+		.mask_flags =	MTD_WRITEABLE	/* force read-only */
+	}, {
+		.name =		"Kernel",
+		.offset =	0x00040000,
+		.size =		0x00400000,
+		.mask_flags =	0
+	}, {
+		.name =		"Rootfs",
+		.offset =	0x00440000,
+		.size =		MTDPART_SIZ_FULL,
+		.mask_flags =	0
+	}
+};
+
+static struct physmap_flash_data colibri_flash_data[] = {
+	{
+		.width		= 4,			/* bankwidth in bytes */
+		.parts		= colibri_partitions,
+		.nr_parts	= ARRAY_SIZE(colibri_partitions)
+	}
+};
+
+static struct resource colibri_pxa270_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device colibri_pxa270_flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev 	= {
+		.platform_data = colibri_flash_data,
+	},
+	.resource = &colibri_pxa270_flash_resource,
+	.num_resources = 1,
+};
+
+static void __init colibri_pxa270_nor_init(void)
+{
+	platform_device_register(&colibri_pxa270_flash_device);
+}
+#else
+static inline void colibri_pxa270_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Ethernet
+ ******************************************************************************/
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource colibri_pxa270_dm9000_resources[] = {
+	{
+		.start	= PXA_CS2_PHYS,
+		.end	= PXA_CS2_PHYS + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= PXA_CS2_PHYS + 4,
+		.end	= PXA_CS2_PHYS + 4 + 500,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
+	},
+};
+
+static struct platform_device colibri_pxa270_dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(colibri_pxa270_dm9000_resources),
+	.resource	= colibri_pxa270_dm9000_resources,
+};
+
+static void __init colibri_pxa270_eth_init(void)
+{
+	platform_device_register(&colibri_pxa270_dm9000_device);
+}
+#else
+static inline void colibri_pxa270_eth_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
+	.irq		= PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ),
+};
+
+static struct platform_device colibri_pxa270_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &colibri_pxa270_ucb1400_pdata,
+	},
+};
+
+static void __init colibri_pxa270_tsc_init(void)
+{
+	pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
+	platform_device_register(&colibri_pxa270_ucb1400_device);
+}
+#else
+static inline void colibri_pxa270_tsc_init(void) {}
+#endif
+
+static int colibri_pxa270_baseboard;
+core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
+
+static void __init colibri_pxa270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
+
+	colibri_pxa270_nor_init();
+	colibri_pxa270_eth_init();
+	colibri_pxa270_tsc_init();
+
+	switch (colibri_pxa270_baseboard) {
+	case COLIBRI_EVALBOARD:
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(
+			colibri_pxa270_evalboard_pin_config));
+		colibri_evalboard_init();
+		break;
+	case COLIBRI_PXA270_INCOME:
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
+		colibri_pxa270_income_boardinit();
+		break;
+	default:
+		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
+				colibri_pxa270_baseboard);
+	}
+
+	regulator_has_full_constraints();
+}
+
+/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
+ * with the INCOME mach type or with COLIBRI and the kernel parameter
+ * "colibri_pxa270_baseboard=1"
+ */
+static void __init colibri_pxa270_income_init(void)
+{
+	colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
+	colibri_pxa270_init();
+}
+
+MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
+	.atag_offset	= 0x100,
+	.init_machine	= colibri_pxa270_init,
+	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
+	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+
+MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
+	.atag_offset	= 0x100,
+	.init_machine	= colibri_pxa270_income_init,
+	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
+	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+

arch/arm/mach-pxa/colibri-pxa300.c

@@ -0,0 +1,195 @@
+/*
+ *  arch/arm/mach-pxa/colibri-pxa300.c
+ *
+ *  Support for Toradex PXA300/310 based Colibri module
+ *
+ *  Daniel Mack <daniel@caiaq.de>
+ *  Matthias Meier <matthias.j.meier@gmx.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+
+#include "pxa300.h"
+#include "colibri.h"
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <mach/audio.h>
+
+#include "generic.h"
+#include "devices.h"
+
+
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
+	/* MMC */
+	GPIO7_MMC1_CLK,
+	GPIO14_MMC1_CMD,
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO13_GPIO,	/* GPIO13_COLIBRI_PXA300_SD_DETECT */
+
+	/* UHC */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+	GPIO77_USB_P3_1,
+	GPIO78_USB_P3_2,
+	GPIO79_USB_P3_3,
+	GPIO80_USB_P3_4,
+	GPIO81_USB_P3_5,
+	GPIO82_USB_P3_6,
+
+	/* I2C */
+	GPIO21_I2C_SCL,
+	GPIO22_I2C_SDA,
+};
+#else
+static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {};
+#endif
+
+#if defined(CONFIG_AX88796)
+#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO26_GPIO)
+/*
+ * Asix AX88796 Ethernet
+ */
+static struct ax_plat_data colibri_asix_platdata = {
+	.flags		= 0, /* defined later */
+	.wordlength	= 2,
+};
+
+static struct resource colibri_asix_resource[] = {
+	[0] = {
+		.start = PXA3xx_CS2_PHYS,
+		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+	}
+};
+
+static struct platform_device asix_device = {
+	.name		= "ax88796",
+	.id		= 0,
+	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
+	.resource	= colibri_asix_resource,
+	.dev		= {
+		.platform_data = &colibri_asix_platdata
+	}
+};
+
+static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
+	GPIO1_nCS2,			/* AX88796 chip select */
+	GPIO26_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
+};
+
+static void __init colibri_pxa300_init_eth(void)
+{
+	colibri_pxa3xx_init_eth(&colibri_asix_platdata);
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
+	platform_device_register(&asix_device);
+}
+#else
+static inline void __init colibri_pxa300_init_eth(void) {}
+#endif /* CONFIG_AX88796 */
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
+	GPIO54_LCD_LDD_0,
+	GPIO55_LCD_LDD_1,
+	GPIO56_LCD_LDD_2,
+	GPIO57_LCD_LDD_3,
+	GPIO58_LCD_LDD_4,
+	GPIO59_LCD_LDD_5,
+	GPIO60_LCD_LDD_6,
+	GPIO61_LCD_LDD_7,
+	GPIO62_LCD_LDD_8,
+	GPIO63_LCD_LDD_9,
+	GPIO64_LCD_LDD_10,
+	GPIO65_LCD_LDD_11,
+	GPIO66_LCD_LDD_12,
+	GPIO67_LCD_LDD_13,
+	GPIO68_LCD_LDD_14,
+	GPIO69_LCD_LDD_15,
+	GPIO70_LCD_LDD_16,
+	GPIO71_LCD_LDD_17,
+	GPIO62_LCD_CS_N,
+	GPIO72_LCD_FCLK,
+	GPIO73_LCD_LCLK,
+	GPIO74_LCD_PCLK,
+	GPIO75_LCD_BIAS,
+	GPIO76_LCD_VSYNC,
+};
+
+static void __init colibri_pxa300_init_lcd(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_lcd_pin_config));
+}
+
+#else
+static inline void colibri_pxa300_init_lcd(void) {}
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
+#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
+static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
+	GPIO24_AC97_SYSCLK,
+	GPIO23_AC97_nACRESET,
+	GPIO25_AC97_SDATA_IN_0,
+	GPIO27_AC97_SDATA_OUT,
+	GPIO28_AC97_SYNC,
+	GPIO29_AC97_BITCLK
+};
+
+static inline void __init colibri_pxa310_init_ac97(void)
+{
+	/* no AC97 codec on Colibri PXA300 */
+	if (!cpu_is_pxa310())
+		return;
+
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa310_ac97_pin_config));
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void colibri_pxa310_init_ac97(void) {}
+#endif
+
+void __init colibri_pxa300_init(void)
+{
+	colibri_pxa300_init_eth();
+	colibri_pxa3xx_init_nand();
+	colibri_pxa300_init_lcd();
+	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
+	colibri_pxa310_init_ac97();
+
+	/* Evalboard init */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
+	colibri_evalboard_init();
+}
+
+MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
+	.atag_offset	= 0x100,
+	.init_machine	= colibri_pxa300_init,
+	.map_io		= pxa3xx_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
+	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+

arch/arm/mach-pxa/colibri-pxa320.c

@@ -0,0 +1,265 @@
+/*
+ *  arch/arm/mach-pxa/colibri-pxa320.c
+ *
+ *  Support for Toradex PXA320/310 based Colibri module
+ *
+ *  Daniel Mack <daniel@caiaq.de>
+ *  Matthias Meier <matthias.j.meier@gmx.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+
+#include "pxa320.h"
+#include "colibri.h"
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <mach/audio.h>
+#include "pxa27x-udc.h"
+#include "udc.h"
+
+#include "generic.h"
+#include "devices.h"
+
+#ifdef	CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
+	/* MMC */
+	GPIO22_MMC1_CLK,
+	GPIO23_MMC1_CMD,
+	GPIO18_MMC1_DAT0,
+	GPIO19_MMC1_DAT1,
+	GPIO20_MMC1_DAT2,
+	GPIO21_MMC1_DAT3,
+	GPIO28_GPIO,	/* SD detect */
+
+	/* UART 1 configuration (may be set by bootloader) */
+	GPIO99_UART1_CTS,
+	GPIO104_UART1_RTS,
+	GPIO97_UART1_RXD,
+	GPIO98_UART1_TXD,
+	GPIO101_UART1_DTR,
+	GPIO103_UART1_DSR,
+	GPIO100_UART1_DCD,
+	GPIO102_UART1_RI,
+
+	/* UART 2 configuration */
+	GPIO109_UART2_CTS,
+	GPIO112_UART2_RTS,
+	GPIO110_UART2_RXD,
+	GPIO111_UART2_TXD,
+
+	/* UART 3 configuration */
+	GPIO30_UART3_RXD,
+	GPIO31_UART3_TXD,
+
+	/* UHC */
+	GPIO2_2_USBH_PEN,
+	GPIO3_2_USBH_PWR,
+
+	/* I2C */
+	GPIO32_I2C_SCL,
+	GPIO33_I2C_SDA,
+
+	/* PCMCIA */
+	MFP_CFG(GPIO59, AF7),	/* PRST ; AF7 to tristate */
+	MFP_CFG(GPIO61, AF7),	/* PCE1 ; AF7 to tristate */
+	MFP_CFG(GPIO60, AF7),	/* PCE2 ; AF7 to tristate */
+	MFP_CFG(GPIO62, AF7),	/* PCD ; AF7 to tristate */
+	MFP_CFG(GPIO56, AF7),	/* PSKTSEL ; AF7 to tristate */
+	GPIO27_GPIO,		/* RDnWR ; input/tristate */
+	GPIO50_GPIO,		/* PREG ; input/tristate */
+	GPIO2_RDY,
+	GPIO5_NPIOR,
+	GPIO6_NPIOW,
+	GPIO7_NPIOS16,
+	GPIO8_NPWAIT,
+	GPIO29_GPIO,		/* PRDY (READY GPIO) */
+	GPIO57_GPIO,		/* PPEN (POWER GPIO) */
+	GPIO81_GPIO,		/* PCD (DETECT GPIO) */
+	GPIO77_GPIO,		/* PRST (RESET GPIO) */
+	GPIO53_GPIO,		/* PBVD1 */
+	GPIO79_GPIO,		/* PBVD2 */
+	GPIO54_GPIO,		/* POE */
+};
+#else
+static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
+#endif
+
+#if defined(CONFIG_AX88796)
+#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO36_GPIO)
+/*
+ * Asix AX88796 Ethernet
+ */
+static struct ax_plat_data colibri_asix_platdata = {
+	.flags		= 0, /* defined later */
+	.wordlength	= 2,
+};
+
+static struct resource colibri_asix_resource[] = {
+	[0] = {
+		.start = PXA3xx_CS2_PHYS,
+		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+	}
+};
+
+static struct platform_device asix_device = {
+	.name		= "ax88796",
+	.id		= 0,
+	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
+	.resource	= colibri_asix_resource,
+	.dev		= {
+		.platform_data = &colibri_asix_platdata
+	}
+};
+
+static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
+	GPIO3_nCS2,			/* AX88796 chip select */
+	GPIO36_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
+};
+
+static void __init colibri_pxa320_init_eth(void)
+{
+	colibri_pxa3xx_init_eth(&colibri_asix_platdata);
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
+	platform_device_register(&asix_device);
+}
+#else
+static inline void __init colibri_pxa320_init_eth(void) {}
+#endif /* CONFIG_AX88796 */
+
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
+static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
+	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
+	.gpio_pullup		= -1,
+};
+
+static struct platform_device colibri_pxa320_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &colibri_pxa320_gpio_vbus_info,
+	},
+};
+
+static void colibri_pxa320_udc_command(int cmd)
+{
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+		UP2OCR = UP2OCR_HXOE;
+}
+
+static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
+	.udc_command		= colibri_pxa320_udc_command,
+	.gpio_pullup		= -1,
+};
+
+static void __init colibri_pxa320_init_udc(void)
+{
+	pxa_set_udc_info(&colibri_pxa320_udc_info);
+	platform_device_register(&colibri_pxa320_gpio_vbus);
+}
+#else
+static inline void colibri_pxa320_init_udc(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
+	GPIO6_2_LCD_LDD_0,
+	GPIO7_2_LCD_LDD_1,
+	GPIO8_2_LCD_LDD_2,
+	GPIO9_2_LCD_LDD_3,
+	GPIO10_2_LCD_LDD_4,
+	GPIO11_2_LCD_LDD_5,
+	GPIO12_2_LCD_LDD_6,
+	GPIO13_2_LCD_LDD_7,
+	GPIO63_LCD_LDD_8,
+	GPIO64_LCD_LDD_9,
+	GPIO65_LCD_LDD_10,
+	GPIO66_LCD_LDD_11,
+	GPIO67_LCD_LDD_12,
+	GPIO68_LCD_LDD_13,
+	GPIO69_LCD_LDD_14,
+	GPIO70_LCD_LDD_15,
+	GPIO71_LCD_LDD_16,
+	GPIO72_LCD_LDD_17,
+	GPIO73_LCD_CS_N,
+	GPIO74_LCD_VSYNC,
+	GPIO14_2_LCD_FCLK,
+	GPIO15_2_LCD_LCLK,
+	GPIO16_2_LCD_PCLK,
+	GPIO17_2_LCD_BIAS,
+};
+
+static void __init colibri_pxa320_init_lcd(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config));
+}
+#else
+static inline void colibri_pxa320_init_lcd(void) {}
+#endif
+
+#if	defined(CONFIG_SND_AC97_CODEC) || \
+	defined(CONFIG_SND_AC97_CODEC_MODULE)
+static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
+	GPIO34_AC97_SYSCLK,
+	GPIO35_AC97_SDATA_IN_0,
+	GPIO37_AC97_SDATA_OUT,
+	GPIO38_AC97_SYNC,
+	GPIO39_AC97_BITCLK,
+	GPIO40_AC97_nACRESET
+};
+
+static inline void __init colibri_pxa320_init_ac97(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config));
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void colibri_pxa320_init_ac97(void) {}
+#endif
+
+void __init colibri_pxa320_init(void)
+{
+	colibri_pxa320_init_eth();
+	colibri_pxa3xx_init_nand();
+	colibri_pxa320_init_lcd();
+	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
+	colibri_pxa320_init_ac97();
+	colibri_pxa320_init_udc();
+
+	/* Evalboard init */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
+	colibri_evalboard_init();
+}
+
+MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
+	.atag_offset	= 0x100,
+	.init_machine	= colibri_pxa320_init,
+	.map_io		= pxa3xx_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
+	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+

arch/arm/mach-pxa/colibri-pxa3xx.c

@@ -0,0 +1,153 @@
+/*
+ *  arch/arm/mach-pxa/colibri-pxa3xx.c
+ *
+ *  Common functions for all Toradex PXA3xx modules
+ *
+ *  Daniel Mack <daniel@caiaq.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/etherdevice.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/sizes.h>
+#include <asm/system_info.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/pxa3xx-regs.h>
+#include "mfp-pxa300.h"
+#include "colibri.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#if defined(CONFIG_AX88796)
+#define ETHER_ADDR_LEN 6
+static u8 ether_mac_addr[ETHER_ADDR_LEN];
+
+void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
+{
+	int i;
+	u64 serial = ((u64) system_serial_high << 32) | system_serial_low;
+
+	/*
+	 * If the bootloader passed in a serial boot tag, which contains a
+	 * valid ethernet MAC, pass it to the interface. Toradex ships the
+	 * modules with their own bootloader which provides a valid MAC
+	 * this way.
+	 */
+
+	for (i = 0; i < ETHER_ADDR_LEN; i++) {
+		ether_mac_addr[i] = serial & 0xff;
+		serial >>= 8;
+	}
+
+	if (is_valid_ether_addr(ether_mac_addr)) {
+		plat_data->flags |= AXFLG_MAC_FROMPLATFORM;
+		plat_data->mac_addr = ether_mac_addr;
+		printk(KERN_INFO "%s(): taking MAC from serial boot tag\n",
+			__func__);
+	} else {
+		plat_data->flags |= AXFLG_MAC_FROMDEV;
+		printk(KERN_INFO "%s(): no valid serial boot tag found, "
+			"taking MAC from device\n", __func__);
+	}
+}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static int lcd_bl_pin;
+
+/*
+ * LCD panel (Sharp LQ043T3DX02)
+ */
+static void colibri_lcd_backlight(int on)
+{
+	gpio_set_value(lcd_bl_pin, !!on);
+}
+
+static struct pxafb_mode_info sharp_lq43_mode = {
+	.pixclock	= 101936,
+	.xres		= 480,
+	.yres		= 272,
+	.bpp		= 32,
+	.depth		= 18,
+	.hsync_len      = 41,
+	.left_margin    = 2,
+	.right_margin   = 2,
+	.vsync_len      = 10,
+	.upper_margin   = 2,
+	.lower_margin   = 2,
+	.sync	   	= 0,
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info sharp_lq43_info = {
+	.modes		= &sharp_lq43_mode,
+	.num_modes	= 1,
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+	.lcd_conn	= LCD_COLOR_TFT_18BPP,
+	.pxafb_backlight_power = colibri_lcd_backlight,
+};
+
+void __init colibri_pxa3xx_init_lcd(int bl_pin)
+{
+	lcd_bl_pin = bl_pin;
+	gpio_request(bl_pin, "lcd backlight");
+	gpio_direction_output(bl_pin, 0);
+	pxa_set_fb_info(NULL, &sharp_lq43_info);
+}
+#endif
+
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition colibri_nand_partitions[] = {
+	{
+		.name        = "bootloader",
+		.offset      = 0,
+		.size        = SZ_512K,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "kernel",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_4M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "reserved",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_1M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "fs",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct pxa3xx_nand_platform_data colibri_nand_info = {
+	.enable_arbiter	= 1,
+	.keep_config	= 1,
+	.num_cs		= 1,
+	.parts[0]	= colibri_nand_partitions,
+	.nr_parts[0]	= ARRAY_SIZE(colibri_nand_partitions),
+};
+
+void __init colibri_pxa3xx_init_nand(void)
+{
+	pxa3xx_set_nand_info(&colibri_nand_info);
+}
+#endif
+

arch/arm/mach-pxa/colibri.h

@@ -0,0 +1,69 @@
+#ifndef _COLIBRI_H_
+#define _COLIBRI_H_
+
+#include <net/ax88796.h>
+#include <mach/mfp.h>
+
+/*
+ * base board glue for PXA270 module
+ */
+
+enum {
+	COLIBRI_EVALBOARD = 0,
+	COLIBRI_PXA270_INCOME,
+};
+
+#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
+extern void colibri_evalboard_init(void);
+#else
+static inline void colibri_evalboard_init(void) {}
+#endif
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
+extern void colibri_pxa270_income_boardinit(void);
+#else
+static inline void colibri_pxa270_income_boardinit(void) {}
+#endif
+
+/*
+ * common settings for all modules
+ */
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
+#else
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern void colibri_pxa3xx_init_lcd(int bl_pin);
+#else
+static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
+#endif
+
+#if defined(CONFIG_AX88796)
+extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
+#endif
+
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+extern void colibri_pxa3xx_init_nand(void);
+#else
+static inline void colibri_pxa3xx_init_nand(void) {}
+#endif
+
+/* physical memory regions */
+#define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
+
+/* GPIO definitions for Colibri PXA270 */
+#define GPIO114_COLIBRI_PXA270_ETH_IRQ	114
+#define GPIO0_COLIBRI_PXA270_SD_DETECT	0
+#define GPIO113_COLIBRI_PXA270_TS_IRQ	113
+
+/* GPIO definitions for Colibri PXA300/310 */
+#define GPIO13_COLIBRI_PXA300_SD_DETECT	13
+
+/* GPIO definitions for Colibri PXA320 */
+#define GPIO28_COLIBRI_PXA320_SD_DETECT	28
+
+#endif /* _COLIBRI_H_ */
+

arch/arm/mach-pxa/corgi.c

@@ -0,0 +1,808 @@
+/*
+ * Support for Sharp SL-C7xx PDAs
+ * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches/lubbock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>	/* symbol_get ; symbol_put */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/host.h>
+#include <linux/mtd/physmap.h>
+#include <linux/pm.h>
+#include <linux/gpio.h>
+#include <linux/backlight.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
+#include <linux/io.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/gpio_keys.h>
+#include <linux/module.h>
+#include <linux/memblock.h>
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "pxa25x.h"
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include "udc.h"
+#include <mach/corgi.h>
+#include "sharpsl_pm.h"
+
+#include <asm/mach/sharpsl_param.h>
+#include <asm/hardware/scoop.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long corgi_pin_config[] __initdata = {
+	/* Static Memory I/O */
+	GPIO78_nCS_2,	/* w100fb */
+	GPIO80_nCS_4,	/* scoop */
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO24_GPIO,	/* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
+
+	/* Infra-Red */
+	GPIO47_FICP_TXD,
+	GPIO46_FICP_RXD,
+
+	/* FFUART */
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+	GPIO39_FFUART_TXD,
+	GPIO37_FFUART_DSR,
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* GPIO Matrix Keypad */
+	GPIO66_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 0 */
+	GPIO67_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 1 */
+	GPIO68_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 2 */
+	GPIO69_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 3 */
+	GPIO70_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 4 */
+	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 5 */
+	GPIO72_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 6 */
+	GPIO73_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 7 */
+	GPIO74_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 8 */
+	GPIO75_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 9 */
+	GPIO76_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 10 */
+	GPIO77_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 11 */
+	GPIO58_GPIO,	/* row 0 */
+	GPIO59_GPIO,	/* row 1 */
+	GPIO60_GPIO,	/* row 2 */
+	GPIO61_GPIO,	/* row 3 */
+	GPIO62_GPIO,	/* row 4 */
+	GPIO63_GPIO,	/* row 5 */
+	GPIO64_GPIO,	/* row 6 */
+	GPIO65_GPIO,	/* row 7 */
+
+	/* GPIO */
+	GPIO9_GPIO,				/* CORGI_GPIO_nSD_DETECT */
+	GPIO7_GPIO,				/* CORGI_GPIO_nSD_WP */
+	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */
+	GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_LED_ORANGE */
+	GPIO21_GPIO,				/* CORGI_GPIO_ADC_TEMP */
+	GPIO22_GPIO,				/* CORGI_GPIO_IR_ON */
+	GPIO33_GPIO,				/* CORGI_GPIO_SD_PWR */
+	GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_ON */
+	GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_UKN */
+	GPIO44_GPIO,				/* CORGI_GPIO_HSYNC */
+
+	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_KEY_INT */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* CORGI_GPIO_AC_IN */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_WAKEUP */
+};
+
+/*
+ * Corgi SCOOP Device
+ */
+static struct resource corgi_scoop_resources[] = {
+	[0] = {
+		.start		= 0x10800000,
+		.end		= 0x10800fff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct scoop_config corgi_scoop_setup = {
+	.io_dir 	= CORGI_SCOOP_IO_DIR,
+	.io_out		= CORGI_SCOOP_IO_OUT,
+	.gpio_base	= CORGI_SCOOP_GPIO_BASE,
+};
+
+struct platform_device corgiscoop_device = {
+	.name		= "sharp-scoop",
+	.id		= -1,
+	.dev		= {
+ 		.platform_data	= &corgi_scoop_setup,
+	},
+	.num_resources	= ARRAY_SIZE(corgi_scoop_resources),
+	.resource	= corgi_scoop_resources,
+};
+
+static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
+{
+	.dev        = &corgiscoop_device.dev,
+	.irq        = CORGI_IRQ_GPIO_CF_IRQ,
+	.cd_irq     = CORGI_IRQ_GPIO_CF_CD,
+	.cd_irq_str = "PCMCIA0 CD",
+},
+};
+
+static struct scoop_pcmcia_config corgi_pcmcia_config = {
+	.devs         = &corgi_pcmcia_scoop[0],
+	.num_devs     = 1,
+};
+
+static struct w100_mem_info corgi_fb_mem = {
+	.ext_cntl          = 0x00040003,
+	.sdram_mode_reg    = 0x00650021,
+	.ext_timing_cntl   = 0x10002a4a,
+	.io_cntl           = 0x7ff87012,
+	.size              = 0x1fffff,
+};
+
+static struct w100_gen_regs corgi_fb_regs = {
+	.lcd_format    = 0x00000003,
+	.lcdd_cntl1    = 0x01CC0000,
+	.lcdd_cntl2    = 0x0003FFFF,
+	.genlcd_cntl1  = 0x00FFFF0D,
+	.genlcd_cntl2  = 0x003F3003,
+	.genlcd_cntl3  = 0x000102aa,
+};
+
+static struct w100_gpio_regs corgi_fb_gpio = {
+	.init_data1   = 0x000000bf,
+	.init_data2   = 0x00000000,
+	.gpio_dir1    = 0x00000000,
+	.gpio_oe1     = 0x03c0feff,
+	.gpio_dir2    = 0x00000000,
+	.gpio_oe2     = 0x00000000,
+};
+
+static struct w100_mode corgi_fb_modes[] = {
+{
+	.xres            = 480,
+	.yres            = 640,
+	.left_margin     = 0x56,
+	.right_margin    = 0x55,
+	.upper_margin    = 0x03,
+	.lower_margin    = 0x00,
+	.crtc_ss         = 0x82360056,
+	.crtc_ls         = 0xA0280000,
+	.crtc_gs         = 0x80280028,
+	.crtc_vpos_gs    = 0x02830002,
+	.crtc_rev        = 0x00400008,
+	.crtc_dclk       = 0xA0000000,
+	.crtc_gclk       = 0x8015010F,
+	.crtc_goe        = 0x80100110,
+	.crtc_ps1_active = 0x41060010,
+	.pll_freq        = 75,
+	.fast_pll_freq   = 100,
+	.sysclk_src      = CLK_SRC_PLL,
+	.sysclk_divider  = 0,
+	.pixclk_src      = CLK_SRC_PLL,
+	.pixclk_divider  = 2,
+	.pixclk_divider_rotated = 6,
+},{
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 0x27,
+	.right_margin    = 0x2e,
+	.upper_margin    = 0x01,
+	.lower_margin    = 0x00,
+	.crtc_ss         = 0x81170027,
+	.crtc_ls         = 0xA0140000,
+	.crtc_gs         = 0xC0140014,
+	.crtc_vpos_gs    = 0x00010141,
+	.crtc_rev        = 0x00400008,
+	.crtc_dclk       = 0xA0000000,
+	.crtc_gclk       = 0x8015010F,
+	.crtc_goe        = 0x80100110,
+	.crtc_ps1_active = 0x41060010,
+	.pll_freq        = 0,
+	.fast_pll_freq   = 0,
+	.sysclk_src      = CLK_SRC_XTAL,
+	.sysclk_divider  = 0,
+	.pixclk_src      = CLK_SRC_XTAL,
+	.pixclk_divider  = 1,
+	.pixclk_divider_rotated = 1,
+},
+
+};
+
+static struct w100fb_mach_info corgi_fb_info = {
+	.init_mode  = INIT_MODE_ROTATED,
+	.mem        = &corgi_fb_mem,
+	.regs       = &corgi_fb_regs,
+	.modelist   = &corgi_fb_modes[0],
+	.num_modes  = 2,
+	.gpio       = &corgi_fb_gpio,
+	.xtal_freq  = 12500000,
+	.xtal_dbl   = 0,
+};
+
+static struct resource corgi_fb_resources[] = {
+	[0] = {
+		.start   = 0x08000000,
+		.end     = 0x08ffffff,
+		.flags   = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device corgifb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.num_resources	= ARRAY_SIZE(corgi_fb_resources),
+	.resource	= corgi_fb_resources,
+	.dev            = {
+		.platform_data = &corgi_fb_info,
+	},
+
+};
+
+/*
+ * Corgi Keyboard Device
+ */
+#define CORGI_KEY_CALENDER	KEY_F1
+#define CORGI_KEY_ADDRESS	KEY_F2
+#define CORGI_KEY_FN		KEY_F3
+#define CORGI_KEY_CANCEL	KEY_F4
+#define CORGI_KEY_OFF		KEY_SUSPEND
+#define CORGI_KEY_EXOK		KEY_F5
+#define CORGI_KEY_EXCANCEL	KEY_F6
+#define CORGI_KEY_EXJOGDOWN	KEY_F7
+#define CORGI_KEY_EXJOGUP	KEY_F8
+#define CORGI_KEY_JAP1		KEY_LEFTCTRL
+#define CORGI_KEY_JAP2		KEY_LEFTALT
+#define CORGI_KEY_MAIL		KEY_F10
+#define CORGI_KEY_OK		KEY_F11
+#define CORGI_KEY_MENU		KEY_F12
+
+static const uint32_t corgikbd_keymap[] = {
+	KEY(0, 1, KEY_1),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_5),
+	KEY(0, 4, KEY_6),
+	KEY(0, 5, KEY_7),
+	KEY(0, 6, KEY_9),
+	KEY(0, 7, KEY_0),
+	KEY(0, 8, KEY_BACKSPACE),
+	KEY(1, 1, KEY_2),
+	KEY(1, 2, KEY_4),
+	KEY(1, 3, KEY_R),
+	KEY(1, 4, KEY_Y),
+	KEY(1, 5, KEY_8),
+	KEY(1, 6, KEY_I),
+	KEY(1, 7, KEY_O),
+	KEY(1, 8, KEY_P),
+	KEY(2, 0, KEY_TAB),
+	KEY(2, 1, KEY_Q),
+	KEY(2, 2, KEY_E),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_G),
+	KEY(2, 5, KEY_U),
+	KEY(2, 6, KEY_J),
+	KEY(2, 7, KEY_K),
+	KEY(3, 0, CORGI_KEY_CALENDER),
+	KEY(3, 1, KEY_W),
+	KEY(3, 2, KEY_S),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_V),
+	KEY(3, 5, KEY_H),
+	KEY(3, 6, KEY_M),
+	KEY(3, 7, KEY_L),
+	KEY(3, 9, KEY_RIGHTSHIFT),
+	KEY(4, 0, CORGI_KEY_ADDRESS),
+	KEY(4, 1, KEY_A),
+	KEY(4, 2, KEY_D),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_B),
+	KEY(4, 5, KEY_N),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 8, KEY_ENTER),
+	KEY(4, 10, KEY_LEFTSHIFT),
+	KEY(5, 0, CORGI_KEY_MAIL),
+	KEY(5, 1, KEY_Z),
+	KEY(5, 2, KEY_X),
+	KEY(5, 3, KEY_MINUS),
+	KEY(5, 4, KEY_SPACE),
+	KEY(5, 5, KEY_COMMA),
+	KEY(5, 7, KEY_UP),
+	KEY(5, 11, CORGI_KEY_FN),
+	KEY(6, 0, KEY_SYSRQ),
+	KEY(6, 1, CORGI_KEY_JAP1),
+	KEY(6, 2, CORGI_KEY_JAP2),
+	KEY(6, 3, CORGI_KEY_CANCEL),
+	KEY(6, 4, CORGI_KEY_OK),
+	KEY(6, 5, CORGI_KEY_MENU),
+	KEY(6, 6, KEY_LEFT),
+	KEY(6, 7, KEY_DOWN),
+	KEY(6, 8, KEY_RIGHT),
+	KEY(7, 0, CORGI_KEY_OFF),
+	KEY(7, 1, CORGI_KEY_EXOK),
+	KEY(7, 2, CORGI_KEY_EXCANCEL),
+	KEY(7, 3, CORGI_KEY_EXJOGDOWN),
+	KEY(7, 4, CORGI_KEY_EXJOGUP),
+};
+
+static struct matrix_keymap_data corgikbd_keymap_data = {
+	.keymap		= corgikbd_keymap,
+	.keymap_size	= ARRAY_SIZE(corgikbd_keymap),
+};
+
+static const int corgikbd_row_gpios[] =
+		{ 58, 59, 60, 61, 62, 63, 64, 65 };
+static const int corgikbd_col_gpios[] =
+		{ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
+
+static struct matrix_keypad_platform_data corgikbd_pdata = {
+	.keymap_data		= &corgikbd_keymap_data,
+	.row_gpios		= corgikbd_row_gpios,
+	.col_gpios		= corgikbd_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(corgikbd_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(corgikbd_col_gpios),
+	.col_scan_delay_us	= 10,
+	.debounce_ms		= 10,
+	.wakeup			= 1,
+};
+
+static struct platform_device corgikbd_device = {
+	.name		= "matrix-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &corgikbd_pdata,
+	},
+};
+
+static struct gpio_keys_button corgi_gpio_keys[] = {
+	{
+		.type	= EV_SW,
+		.code	= SW_LID,
+		.gpio	= CORGI_GPIO_SWA,
+		.desc	= "Lid close switch",
+		.debounce_interval = 500,
+	},
+	{
+		.type	= EV_SW,
+		.code	= SW_TABLET_MODE,
+		.gpio	= CORGI_GPIO_SWB,
+		.desc	= "Tablet mode switch",
+		.debounce_interval = 500,
+	},
+	{
+		.type	= EV_SW,
+		.code	= SW_HEADPHONE_INSERT,
+		.gpio	= CORGI_GPIO_AK_INT,
+		.desc	= "HeadPhone insert",
+		.debounce_interval = 500,
+	},
+};
+
+static struct gpio_keys_platform_data corgi_gpio_keys_platform_data = {
+	.buttons	= corgi_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(corgi_gpio_keys),
+	.poll_interval	= 250,
+};
+
+static struct platform_device corgi_gpio_keys_device = {
+	.name	= "gpio-keys-polled",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &corgi_gpio_keys_platform_data,
+	},
+};
+
+/*
+ * Corgi LEDs
+ */
+static struct gpio_led corgi_gpio_leds[] = {
+	{
+		.name			= "corgi:amber:charge",
+		.default_trigger	= "sharpsl-charge",
+		.gpio			= CORGI_GPIO_LED_ORANGE,
+	},
+	{
+		.name			= "corgi:green:mail",
+		.default_trigger	= "nand-disk",
+		.gpio			= CORGI_GPIO_LED_GREEN,
+	},
+};
+
+static struct gpio_led_platform_data corgi_gpio_leds_info = {
+	.leds		= corgi_gpio_leds,
+	.num_leds	= ARRAY_SIZE(corgi_gpio_leds),
+};
+
+static struct platform_device corgiled_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &corgi_gpio_leds_info,
+	},
+};
+
+/*
+ * Corgi Audio
+ */
+static struct platform_device corgi_audio_device = {
+	.name	= "corgi-audio",
+	.id	= -1,
+};
+
+/*
+ * MMC/SD Device
+ *
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+static struct pxamci_platform_data corgi_mci_platform_data = {
+	.detect_delay_ms	= 250,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= CORGI_GPIO_nSD_DETECT,
+	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
+	.gpio_power		= CORGI_GPIO_SD_PWR,
+};
+
+
+/*
+ * Irda
+ */
+static struct pxaficp_platform_data corgi_ficp_platform_data = {
+	.gpio_pwdown		= CORGI_GPIO_IR_ON,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+};
+
+
+/*
+ * USB Device Controller
+ */
+static struct pxa2xx_udc_mach_info udc_info __initdata = {
+	/* no connect GPIO; corgi can't tell connection status */
+	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
+};
+
+#if IS_ENABLED(CONFIG_SPI_PXA2XX)
+static struct pxa2xx_spi_master corgi_spi_info = {
+	.num_chipselect	= 3,
+};
+
+static void corgi_wait_for_hsync(void)
+{
+	while (gpio_get_value(CORGI_GPIO_HSYNC))
+		cpu_relax();
+
+	while (!gpio_get_value(CORGI_GPIO_HSYNC))
+		cpu_relax();
+}
+
+static struct ads7846_platform_data corgi_ads7846_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.gpio_pendown		= CORGI_GPIO_TP_INT,
+	.wait_for_sync		= corgi_wait_for_hsync,
+};
+
+static struct pxa2xx_spi_chip corgi_ads7846_chip = {
+	.gpio_cs	= CORGI_GPIO_ADS7846_CS,
+};
+
+static void corgi_bl_kick_battery(void)
+{
+	void (*kick_batt)(void);
+
+	kick_batt = symbol_get(sharpsl_battery_kick);
+	if (kick_batt) {
+		kick_batt();
+		symbol_put(sharpsl_battery_kick);
+	}
+}
+
+static struct corgi_lcd_platform_data corgi_lcdcon_info = {
+	.init_mode		= CORGI_LCD_MODE_VGA,
+	.max_intensity		= 0x2f,
+	.default_intensity	= 0x1f,
+	.limit_mask		= 0x0b,
+	.gpio_backlight_cont	= CORGI_GPIO_BACKLIGHT_CONT,
+	.gpio_backlight_on	= -1,
+	.kick_battery		= corgi_bl_kick_battery,
+};
+
+static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
+	.gpio_cs	= CORGI_GPIO_LCDCON_CS,
+};
+
+static struct pxa2xx_spi_chip corgi_max1111_chip = {
+	.gpio_cs	= CORGI_GPIO_MAX1111_CS,
+};
+
+static struct spi_board_info corgi_spi_devices[] = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 1200000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.platform_data	= &corgi_ads7846_info,
+		.controller_data= &corgi_ads7846_chip,
+		.irq		= PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
+	}, {
+		.modalias	= "corgi-lcd",
+		.max_speed_hz	= 50000,
+		.bus_num	= 1,
+		.chip_select	= 1,
+		.platform_data	= &corgi_lcdcon_info,
+		.controller_data= &corgi_lcdcon_chip,
+	}, {
+		.modalias	= "max1111",
+		.max_speed_hz	= 450000,
+		.bus_num	= 1,
+		.chip_select	= 2,
+		.controller_data= &corgi_max1111_chip,
+	},
+};
+
+static void __init corgi_init_spi(void)
+{
+	pxa2xx_set_spi_info(1, &corgi_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
+}
+#else
+static inline void corgi_init_spi(void) {}
+#endif
+
+static struct mtd_partition sharpsl_nand_partitions[] = {
+	{
+		.name = "System Area",
+		.offset = 0,
+		.size = 7 * 1024 * 1024,
+	},
+	{
+		.name = "Root Filesystem",
+		.offset = 7 * 1024 * 1024,
+		.size = 25 * 1024 * 1024,
+	},
+	{
+		.name = "Home Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr sharpsl_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
+	.badblock_pattern	= &sharpsl_bbt,
+	.partitions		= sharpsl_nand_partitions,
+	.nr_partitions		= ARRAY_SIZE(sharpsl_nand_partitions),
+};
+
+static struct resource sharpsl_nand_resources[] = {
+	{
+		.start	= 0x0C000000,
+		.end	= 0x0C000FFF,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sharpsl_nand_device = {
+	.name		= "sharpsl-nand",
+	.id		= -1,
+	.resource	= sharpsl_nand_resources,
+	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
+	.dev.platform_data	= &sharpsl_nand_platform_data,
+};
+
+static struct mtd_partition sharpsl_rom_parts[] = {
+	{
+		.name	="Boot PROM Filesystem",
+		.offset	= 0x00120000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
+	.parts		= sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+	{
+		.start	= 0x00000000,
+		.end	= 0x007fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sharpsl_rom_device = {
+	.name	= "physmap-flash",
+	.id	= -1,
+	.resource = sharpsl_rom_resources,
+	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+	.dev.platform_data = &sharpsl_rom_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&corgiscoop_device,
+	&corgifb_device,
+	&corgi_gpio_keys_device,
+	&corgikbd_device,
+	&corgiled_device,
+	&corgi_audio_device,
+	&sharpsl_nand_device,
+	&sharpsl_rom_device,
+};
+
+static struct i2c_board_info __initdata corgi_i2c_devices[] = {
+	{ I2C_BOARD_INFO("wm8731", 0x1b) },
+};
+
+static void corgi_poweroff(void)
+{
+	if (!machine_is_corgi())
+		/* Green LED off tells the bootloader to halt */
+		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
+
+	pxa_restart(REBOOT_HARD, NULL);
+}
+
+static void corgi_restart(enum reboot_mode mode, const char *cmd)
+{
+	if (!machine_is_corgi())
+		/* Green LED on tells the bootloader to reboot */
+		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
+
+	pxa_restart(REBOOT_HARD, cmd);
+}
+
+static void __init corgi_init(void)
+{
+	pm_power_off = corgi_poweroff;
+
+	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+	PCFR |= PCFR_OPDE;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
+
+	/* allow wakeup from various GPIOs */
+	gpio_set_wake(CORGI_GPIO_KEY_INT, 1);
+	gpio_set_wake(CORGI_GPIO_WAKEUP, 1);
+	gpio_set_wake(CORGI_GPIO_AC_IN, 1);
+	gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1);
+
+	if (!machine_is_corgi())
+		gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1);
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	corgi_init_spi();
+
+ 	pxa_set_udc_info(&udc_info);
+	pxa_set_mci_info(&corgi_mci_platform_data);
+	pxa_set_ficp_info(&corgi_ficp_platform_data);
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
+
+	platform_scoop_config = &corgi_pcmcia_config;
+
+	if (machine_is_husky())
+		sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	regulator_has_full_constraints();
+}
+
+static void __init fixup_corgi(struct tag *tags, char **cmdline)
+{
+	sharpsl_save_param();
+	if (machine_is_corgi())
+		memblock_add(0xa0000000, SZ_32M);
+	else
+		memblock_add(0xa0000000, SZ_64M);
+}
+
+#ifdef CONFIG_MACH_CORGI
+MACHINE_START(CORGI, "SHARP Corgi")
+	.fixup		= fixup_corgi,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.init_machine	= corgi_init,
+	.init_time	= pxa_timer_init,
+	.restart	= corgi_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_SHEPHERD
+MACHINE_START(SHEPHERD, "SHARP Shepherd")
+	.fixup		= fixup_corgi,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.init_machine	= corgi_init,
+	.init_time	= pxa_timer_init,
+	.restart	= corgi_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_HUSKY
+MACHINE_START(HUSKY, "SHARP Husky")
+	.fixup		= fixup_corgi,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.init_machine	= corgi_init,
+	.init_time	= pxa_timer_init,
+	.restart	= corgi_restart,
+MACHINE_END
+#endif
+

arch/arm/mach-pxa/csb701.c

@@ -0,0 +1,66 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+#include <asm/mach-types.h>
+
+static struct gpio_keys_button csb701_buttons[] = {
+	{
+		.code	= 0x7,
+		.gpio	= 1,
+		.active_low = 1,
+		.desc	= "SW2",
+		.type	= EV_SW,
+		.wakeup = 1,
+	},
+};
+
+static struct gpio_keys_platform_data csb701_gpio_keys_data = {
+	.buttons = csb701_buttons,
+	.nbuttons = ARRAY_SIZE(csb701_buttons),
+};
+
+static struct gpio_led csb701_leds[] = {
+	{
+		.name	= "csb701:yellow:heartbeat",
+		.default_trigger = "heartbeat",
+		.gpio	= 11,
+		.active_low = 1,
+	},
+};
+
+static struct platform_device csb701_gpio_keys = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev.platform_data = &csb701_gpio_keys_data,
+};
+
+static struct gpio_led_platform_data csb701_leds_gpio_data = {
+	.leds		= csb701_leds,
+	.num_leds	= ARRAY_SIZE(csb701_leds),
+};
+
+static struct platform_device csb701_leds_gpio = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev.platform_data = &csb701_leds_gpio_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&csb701_gpio_keys,
+	&csb701_leds_gpio,
+};
+
+static int __init csb701_init(void)
+{
+	if (!machine_is_csb726())
+		return -ENODEV;
+
+	return platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+module_init(csb701_init);
+

arch/arm/mach-pxa/csb726.c

@@ -0,0 +1,283 @@
+/*
+ *  Support for Cogent CSB726
+ *
+ *  Copyright (c) 2008 Dmitry Eremin-Solenikov
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sm501.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c/pxa-i2c.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "csb726.h"
+#include "pxa27x.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <mach/audio.h>
+#include <mach/smemc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
+ * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
+ * XXX: 21,
+ * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
+ * XXX: 33 CS_5 for LAN9215 on R1
+ */
+
+static unsigned long csb726_pin_config[] = {
+	GPIO78_nCS_2, /* EXP_CS */
+	GPIO79_nCS_3, /* SMSC9215 */
+	GPIO80_nCS_4, /* SM501 */
+
+	GPIO52_GPIO, /* #SMSC9251 int */
+	GPIO53_GPIO, /* SM501 int */
+
+	GPIO1_GPIO, /* GPIO0 */
+	GPIO11_GPIO, /* GPIO1 */
+	GPIO9_GPIO, /* GPIO2 */
+	GPIO10_GPIO, /* GPIO3 */
+	GPIO16_PWM0_OUT, /* or GPIO4 */
+	GPIO17_PWM1_OUT, /* or GPIO5 */
+	GPIO94_GPIO, /* GPIO6 */
+	GPIO95_GPIO, /* GPIO7 */
+	GPIO96_GPIO, /* GPIO8 */
+	GPIO97_GPIO, /* GPIO9 */
+	GPIO15_GPIO, /* EXP_IRQ */
+	GPIO18_RDY, /* EXP_WAIT */
+
+	GPIO0_GPIO, /* PWR_INT */
+	GPIO104_GPIO, /* PWR_OFF */
+
+	GPIO12_GPIO, /* touch irq */
+
+	GPIO13_SSP2_TXD,
+	GPIO14_SSP2_SFRM,
+	MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
+	GPIO22_SSP2_SCLK,
+
+	GPIO81_SSP3_TXD,
+	GPIO82_SSP3_RXD,
+	GPIO83_SSP3_SFRM,
+	GPIO84_SSP3_SCLK,
+
+	GPIO20_GPIO, /* SDIO int */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO100_GPIO, /* SD CD */
+	GPIO101_GPIO, /* SD WP */
+
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO113_AC97_nRESET,
+
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO36_FFUART_DCD,
+	GPIO37_FFUART_DSR,
+	GPIO38_FFUART_RI,
+	GPIO39_FFUART_TXD,
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16, /* maybe unused */
+	GPIO85_nPCE_1,
+	GPIO98_GPIO, /* CF IRQ */
+	GPIO99_GPIO, /* CF CD */
+	GPIO103_GPIO, /* Reset */
+
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+};
+
+static struct pxamci_platform_data csb726_mci = {
+	.detect_delay_ms	= 500,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	/* FIXME setpower */
+	.gpio_card_detect	= CSB726_GPIO_MMC_DETECT,
+	.gpio_card_ro		= CSB726_GPIO_MMC_RO,
+	.gpio_power		= -1,
+};
+
+static struct pxaohci_platform_data csb726_ohci_platform_data = {
+	.port_mode	= PMM_NPS_MODE,
+	.flags		= ENABLE_PORT1 | NO_OC_PROTECTION,
+};
+
+static struct mtd_partition csb726_flash_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0,
+		.size		= CSB726_FLASH_uMON,
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "root",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data csb726_flash_data = {
+	.width		= 2,
+	.parts		= csb726_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb726_flash_partitions),
+};
+
+static struct resource csb726_flash_resources[] = {
+	{
+		.start          = PXA_CS0_PHYS,
+		.end            = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
+		.flags          = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb726_flash = {
+	.name           = "physmap-flash",
+	.dev            = {
+		.platform_data  = &csb726_flash_data,
+	},
+	.resource       = csb726_flash_resources,
+	.num_resources  = ARRAY_SIZE(csb726_flash_resources),
+};
+
+static struct resource csb726_sm501_resources[] = {
+	{
+		.start          = PXA_CS4_PHYS,
+		.end            = PXA_CS4_PHYS + SZ_8M - 1,
+		.flags          = IORESOURCE_MEM,
+		.name		= "sm501-localmem",
+	},
+	{
+		.start          = PXA_CS4_PHYS + SZ_64M - SZ_2M,
+		.end            = PXA_CS4_PHYS + SZ_64M - 1,
+		.flags          = IORESOURCE_MEM,
+		.name		= "sm501-regs",
+	},
+	{
+		.start		= CSB726_IRQ_SM501,
+		.end		= CSB726_IRQ_SM501,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct sm501_initdata csb726_sm501_initdata = {
+/*	.devices	= SM501_USE_USB_HOST, */
+	.devices	= SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
+};
+
+static struct sm501_platdata csb726_sm501_platdata = {
+	.init		= &csb726_sm501_initdata,
+};
+
+static struct platform_device csb726_sm501 = {
+	.name		= "sm501",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(csb726_sm501_resources),
+	.resource	= csb726_sm501_resources,
+	.dev		= {
+		.platform_data = &csb726_sm501_platdata,
+	},
+};
+
+static struct resource csb726_lan_resources[] = {
+	{
+		.start	= PXA_CS3_PHYS,
+		.end	= PXA_CS3_PHYS + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= CSB726_IRQ_LAN,
+		.end	= CSB726_IRQ_LAN,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+struct smsc911x_platform_config csb726_lan_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device csb726_lan = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(csb726_lan_resources),
+	.resource	= csb726_lan_resources,
+	.dev		= {
+		.platform_data	= &csb726_lan_config,
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&csb726_flash,
+	&csb726_sm501,
+	&csb726_lan,
+};
+
+static void __init csb726_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
+/*	__raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
+/*	__raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
+	__raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
+	pxa_set_mci_info(&csb726_mci);
+	pxa_set_ohci_info(&csb726_ohci_platform_data);
+	pxa_set_ac97_info(NULL);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(CSB726, "Cogent CSB726")
+	.atag_offset	= 0x100,
+	.map_io         = pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
+	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
+	.init_machine   = csb726_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END

arch/arm/mach-pxa/csb726.h

@@ -0,0 +1,28 @@
+/*
+ *  Support for Cogent CSB726
+ *
+ *  Copyright (c) 2008 Dmitry Baryshkov
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#ifndef CSB726_H
+#define CSB726_H
+
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+
+#define CSB726_GPIO_IRQ_LAN	52
+#define CSB726_GPIO_IRQ_SM501	53
+#define CSB726_GPIO_MMC_DETECT	100
+#define CSB726_GPIO_MMC_RO	101
+
+#define CSB726_FLASH_SIZE	(64 * 1024 * 1024)
+#define CSB726_FLASH_uMON	(8 * 1024 * 1024)
+
+#define CSB726_IRQ_LAN		PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN)
+#define CSB726_IRQ_SM501	PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501)
+
+#endif
+

arch/arm/mach-pxa/devices.c

@@ -0,0 +1,1240 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/i2c/pxa-i2c.h>
+
+#include "udc.h"
+#include <linux/platform_data/usb-pxa3xx-ulpi.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <mach/irqs.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/media/camera-pxa.h>
+#include <mach/audio.h>
+#include <mach/hardware.h>
+#include <linux/platform_data/mmp_dma.h>
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
+
+#include "devices.h"
+#include "generic.h"
+
+void __init pxa_register_device(struct platform_device *dev, void *data)
+{
+	int ret;
+
+	dev->dev.platform_data = data;
+
+	ret = platform_device_register(dev);
+	if (ret)
+		dev_err(&dev->dev, "unable to register device: %d\n", ret);
+}
+
+static struct resource pxa_resource_pmu = {
+	.start	= IRQ_PMU,
+	.end	= IRQ_PMU,
+	.flags	= IORESOURCE_IRQ,
+};
+
+struct platform_device pxa_device_pmu = {
+	.name		= "xscale-pmu",
+	.id		= -1,
+	.resource	= &pxa_resource_pmu,
+	.num_resources	= 1,
+};
+
+static struct resource pxamci_resources[] = {
+	[0] = {
+		.start	= 0x41100000,
+		.end	= 0x41100fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_MMC,
+		.end	= IRQ_MMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= 21,
+		.end	= 21,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= 22,
+		.end	= 22,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static u64 pxamci_dmamask = 0xffffffffUL;
+
+struct platform_device pxa_device_mci = {
+	.name		= "pxa2xx-mci",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &pxamci_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxamci_resources),
+	.resource	= pxamci_resources,
+};
+
+void __init pxa_set_mci_info(struct pxamci_platform_data *info)
+{
+	pxa_register_device(&pxa_device_mci, info);
+}
+
+
+static struct pxa2xx_udc_mach_info pxa_udc_info = {
+	.gpio_pullup = -1,
+};
+
+void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
+{
+	memcpy(&pxa_udc_info, info, sizeof *info);
+}
+
+static struct resource pxa2xx_udc_resources[] = {
+	[0] = {
+		.start	= 0x40600000,
+		.end	= 0x4060ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_USB,
+		.end	= IRQ_USB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 udc_dma_mask = ~(u32)0;
+
+struct platform_device pxa25x_device_udc = {
+	.name		= "pxa25x-udc",
+	.id		= -1,
+	.resource	= pxa2xx_udc_resources,
+	.num_resources	= ARRAY_SIZE(pxa2xx_udc_resources),
+	.dev		=  {
+		.platform_data	= &pxa_udc_info,
+		.dma_mask	= &udc_dma_mask,
+	}
+};
+
+struct platform_device pxa27x_device_udc = {
+	.name		= "pxa27x-udc",
+	.id		= -1,
+	.resource	= pxa2xx_udc_resources,
+	.num_resources	= ARRAY_SIZE(pxa2xx_udc_resources),
+	.dev		=  {
+		.platform_data	= &pxa_udc_info,
+		.dma_mask	= &udc_dma_mask,
+	}
+};
+
+#ifdef CONFIG_PXA3xx
+static struct resource pxa3xx_u2d_resources[] = {
+	[0] = {
+		.start	= 0x54100000,
+		.end	= 0x54100fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_USB2,
+		.end	= IRQ_USB2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa3xx_device_u2d = {
+	.name		= "pxa3xx-u2d",
+	.id		= -1,
+	.resource	= pxa3xx_u2d_resources,
+	.num_resources	= ARRAY_SIZE(pxa3xx_u2d_resources),
+};
+
+void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_u2d, info);
+}
+#endif /* CONFIG_PXA3xx */
+
+static struct resource pxafb_resources[] = {
+	[0] = {
+		.start	= 0x44000000,
+		.end	= 0x4400ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_LCD,
+		.end	= IRQ_LCD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 fb_dma_mask = ~(u64)0;
+
+struct platform_device pxa_device_fb = {
+	.name		= "pxa2xx-fb",
+	.id		= -1,
+	.dev		= {
+		.dma_mask	= &fb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxafb_resources),
+	.resource	= pxafb_resources,
+};
+
+void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info)
+{
+	pxa_device_fb.dev.parent = parent;
+	pxa_register_device(&pxa_device_fb, info);
+}
+
+static struct resource pxa_resource_ffuart[] = {
+	{
+		.start	= 0x40100000,
+		.end	= 0x40100023,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_FFUART,
+		.end	= IRQ_FFUART,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device pxa_device_ffuart = {
+	.name		= "pxa2xx-uart",
+	.id		= 0,
+	.resource	= pxa_resource_ffuart,
+	.num_resources	= ARRAY_SIZE(pxa_resource_ffuart),
+};
+
+void __init pxa_set_ffuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_ffuart, info);
+}
+
+static struct resource pxa_resource_btuart[] = {
+	{
+		.start	= 0x40200000,
+		.end	= 0x40200023,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_BTUART,
+		.end	= IRQ_BTUART,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device pxa_device_btuart = {
+	.name		= "pxa2xx-uart",
+	.id		= 1,
+	.resource	= pxa_resource_btuart,
+	.num_resources	= ARRAY_SIZE(pxa_resource_btuart),
+};
+
+void __init pxa_set_btuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_btuart, info);
+}
+
+static struct resource pxa_resource_stuart[] = {
+	{
+		.start	= 0x40700000,
+		.end	= 0x40700023,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_STUART,
+		.end	= IRQ_STUART,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device pxa_device_stuart = {
+	.name		= "pxa2xx-uart",
+	.id		= 2,
+	.resource	= pxa_resource_stuart,
+	.num_resources	= ARRAY_SIZE(pxa_resource_stuart),
+};
+
+void __init pxa_set_stuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_stuart, info);
+}
+
+static struct resource pxa_resource_hwuart[] = {
+	{
+		.start	= 0x41600000,
+		.end	= 0x4160002F,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_HWUART,
+		.end	= IRQ_HWUART,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device pxa_device_hwuart = {
+	.name		= "pxa2xx-uart",
+	.id		= 3,
+	.resource	= pxa_resource_hwuart,
+	.num_resources	= ARRAY_SIZE(pxa_resource_hwuart),
+};
+
+void __init pxa_set_hwuart_info(void *info)
+{
+	if (cpu_is_pxa255())
+		pxa_register_device(&pxa_device_hwuart, info);
+	else
+		pr_info("UART: Ignoring attempt to register HWUART on non-PXA255 hardware");
+}
+
+static struct resource pxai2c_resources[] = {
+	{
+		.start	= 0x40301680,
+		.end	= 0x403016a3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_I2C,
+		.end	= IRQ_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa_device_i2c = {
+	.name		= "pxa2xx-i2c",
+	.id		= 0,
+	.resource	= pxai2c_resources,
+	.num_resources	= ARRAY_SIZE(pxai2c_resources),
+};
+
+void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
+{
+	pxa_register_device(&pxa_device_i2c, info);
+}
+
+#ifdef CONFIG_PXA27x
+static struct resource pxa27x_resources_i2c_power[] = {
+	{
+		.start	= 0x40f00180,
+		.end	= 0x40f001a3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PWRI2C,
+		.end	= IRQ_PWRI2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa27x_device_i2c_power = {
+	.name		= "pxa2xx-i2c",
+	.id		= 1,
+	.resource	= pxa27x_resources_i2c_power,
+	.num_resources	= ARRAY_SIZE(pxa27x_resources_i2c_power),
+};
+#endif
+
+static struct resource pxai2s_resources[] = {
+	{
+		.start	= 0x40400000,
+		.end	= 0x40400083,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_I2S,
+		.end	= IRQ_I2S,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa_device_i2s = {
+	.name		= "pxa2xx-i2s",
+	.id		= -1,
+	.resource	= pxai2s_resources,
+	.num_resources	= ARRAY_SIZE(pxai2s_resources),
+};
+
+struct platform_device pxa_device_asoc_ssp1 = {
+	.name		= "pxa-ssp-dai",
+	.id		= 0,
+};
+
+struct platform_device pxa_device_asoc_ssp2= {
+	.name		= "pxa-ssp-dai",
+	.id		= 1,
+};
+
+struct platform_device pxa_device_asoc_ssp3 = {
+	.name		= "pxa-ssp-dai",
+	.id		= 2,
+};
+
+struct platform_device pxa_device_asoc_ssp4 = {
+	.name		= "pxa-ssp-dai",
+	.id		= 3,
+};
+
+struct platform_device pxa_device_asoc_platform = {
+	.name		= "pxa-pcm-audio",
+	.id		= -1,
+};
+
+static u64 pxaficp_dmamask = ~(u32)0;
+
+static struct resource pxa_ir_resources[] = {
+	[0] = {
+		.start  = IRQ_STUART,
+		.end    = IRQ_STUART,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start  = IRQ_ICP,
+		.end    = IRQ_ICP,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start  = 0x40800000,
+		.end	= 0x4080001b,
+		.flags  = IORESOURCE_MEM,
+	},
+	[4] = {
+		.start  = 0x40700000,
+		.end	= 0x40700023,
+		.flags  = IORESOURCE_MEM,
+	},
+	[5] = {
+		.start  = 17,
+		.end	= 17,
+		.flags  = IORESOURCE_DMA,
+	},
+	[6] = {
+		.start  = 18,
+		.end	= 18,
+		.flags  = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa_device_ficp = {
+	.name		= "pxa2xx-ir",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa_ir_resources),
+	.resource	= pxa_ir_resources,
+	.dev		= {
+		.dma_mask = &pxaficp_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
+void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
+{
+	pxa_register_device(&pxa_device_ficp, info);
+}
+
+static struct resource pxa_rtc_resources[] = {
+	[0] = {
+		.start  = 0x40900000,
+		.end	= 0x40900000 + 0x3b,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_RTC1Hz,
+		.end    = IRQ_RTC1Hz,
+		.name	= "rtc 1Hz",
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = IRQ_RTCAlrm,
+		.end    = IRQ_RTCAlrm,
+		.name	= "rtc alarm",
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa_device_rtc = {
+	.name		= "pxa-rtc",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(pxa_rtc_resources),
+	.resource       = pxa_rtc_resources,
+};
+
+struct platform_device sa1100_device_rtc = {
+	.name		= "sa1100-rtc",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(pxa_rtc_resources),
+	.resource       = pxa_rtc_resources,
+};
+
+static struct resource pxa_ac97_resources[] = {
+	[0] = {
+		.start  = 0x40500000,
+		.end	= 0x40500000 + 0xfff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_AC97,
+		.end    = IRQ_AC97,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxa_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device pxa_device_ac97 = {
+	.name           = "pxa2xx-ac97",
+	.id             = -1,
+	.dev            = {
+		.dma_mask = &pxa_ac97_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(pxa_ac97_resources),
+	.resource       = pxa_ac97_resources,
+};
+
+void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops)
+{
+	pxa_register_device(&pxa_device_ac97, ops);
+}
+
+#ifdef CONFIG_PXA25x
+
+static struct resource pxa25x_resource_pwm0[] = {
+	[0] = {
+		.start	= 0x40b00000,
+		.end	= 0x40b0000f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa25x_device_pwm0 = {
+	.name		= "pxa25x-pwm",
+	.id		= 0,
+	.resource	= pxa25x_resource_pwm0,
+	.num_resources	= ARRAY_SIZE(pxa25x_resource_pwm0),
+};
+
+static struct resource pxa25x_resource_pwm1[] = {
+	[0] = {
+		.start	= 0x40c00000,
+		.end	= 0x40c0000f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa25x_device_pwm1 = {
+	.name		= "pxa25x-pwm",
+	.id		= 1,
+	.resource	= pxa25x_resource_pwm1,
+	.num_resources	= ARRAY_SIZE(pxa25x_resource_pwm1),
+};
+
+static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_ssp[] = {
+	[0] = {
+		.start	= 0x41000000,
+		.end	= 0x4100001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SSP,
+		.end	= IRQ_SSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 13,
+		.end	= 13,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 14,
+		.end	= 14,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa25x_device_ssp = {
+	.name		= "pxa25x-ssp",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &pxa25x_ssp_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa25x_resource_ssp,
+	.num_resources	= ARRAY_SIZE(pxa25x_resource_ssp),
+};
+
+static u64 pxa25x_nssp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_nssp[] = {
+	[0] = {
+		.start	= 0x41400000,
+		.end	= 0x4140002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NSSP,
+		.end	= IRQ_NSSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 15,
+		.end	= 15,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 16,
+		.end	= 16,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa25x_device_nssp = {
+	.name		= "pxa25x-nssp",
+	.id		= 1,
+	.dev		= {
+		.dma_mask = &pxa25x_nssp_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa25x_resource_nssp,
+	.num_resources	= ARRAY_SIZE(pxa25x_resource_nssp),
+};
+
+static u64 pxa25x_assp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_assp[] = {
+	[0] = {
+		.start	= 0x41500000,
+		.end	= 0x4150002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_ASSP,
+		.end	= IRQ_ASSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 23,
+		.end	= 23,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 24,
+		.end	= 24,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa25x_device_assp = {
+	/* ASSP is basically equivalent to NSSP */
+	.name		= "pxa25x-nssp",
+	.id		= 2,
+	.dev		= {
+		.dma_mask = &pxa25x_assp_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa25x_resource_assp,
+	.num_resources	= ARRAY_SIZE(pxa25x_resource_assp),
+};
+#endif /* CONFIG_PXA25x */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+static struct resource pxa27x_resource_camera[] = {
+	[0] = {
+		.start	= 0x50000000,
+		.end	= 0x50000fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_CAMERA,
+		.end	= IRQ_CAMERA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
+
+static struct platform_device pxa27x_device_camera = {
+	.name		= "pxa27x-camera",
+	.id		= 0, /* This is used to put cameras on this interface */
+	.dev		= {
+		.dma_mask      		= &pxa27x_dma_mask_camera,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_camera),
+	.resource	= pxa27x_resource_camera,
+};
+
+void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
+{
+	pxa_register_device(&pxa27x_device_camera, info);
+}
+
+static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ohci[] = {
+	[0] = {
+		.start  = 0x4C000000,
+		.end    = 0x4C00ff6f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_USBH1,
+		.end    = IRQ_USBH1,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa27x_device_ohci = {
+	.name		= "pxa27x-ohci",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &pxa27x_ohci_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources  = ARRAY_SIZE(pxa27x_resource_ohci),
+	.resource       = pxa27x_resource_ohci,
+};
+
+void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
+{
+	pxa_register_device(&pxa27x_device_ohci, info);
+}
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+static struct resource pxa27x_resource_keypad[] = {
+	[0] = {
+		.start	= 0x41500000,
+		.end	= 0x4150004c,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_KEYPAD,
+		.end	= IRQ_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa27x_device_keypad = {
+	.name		= "pxa27x-keypad",
+	.id		= -1,
+	.resource	= pxa27x_resource_keypad,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_keypad),
+};
+
+void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
+{
+	pxa_register_device(&pxa27x_device_keypad, info);
+}
+
+static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp1[] = {
+	[0] = {
+		.start	= 0x41000000,
+		.end	= 0x4100003f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SSP,
+		.end	= IRQ_SSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 13,
+		.end	= 13,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 14,
+		.end	= 14,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa27x_device_ssp1 = {
+	.name		= "pxa27x-ssp",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &pxa27x_ssp1_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa27x_resource_ssp1,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp1),
+};
+
+static u64 pxa27x_ssp2_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp2[] = {
+	[0] = {
+		.start	= 0x41700000,
+		.end	= 0x4170003f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SSP2,
+		.end	= IRQ_SSP2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 15,
+		.end	= 15,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 16,
+		.end	= 16,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa27x_device_ssp2 = {
+	.name		= "pxa27x-ssp",
+	.id		= 1,
+	.dev		= {
+		.dma_mask = &pxa27x_ssp2_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa27x_resource_ssp2,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp2),
+};
+
+static u64 pxa27x_ssp3_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp3[] = {
+	[0] = {
+		.start	= 0x41900000,
+		.end	= 0x4190003f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SSP3,
+		.end	= IRQ_SSP3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 66,
+		.end	= 66,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 67,
+		.end	= 67,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa27x_device_ssp3 = {
+	.name		= "pxa27x-ssp",
+	.id		= 2,
+	.dev		= {
+		.dma_mask = &pxa27x_ssp3_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa27x_resource_ssp3,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp3),
+};
+
+static struct resource pxa27x_resource_pwm0[] = {
+	[0] = {
+		.start	= 0x40b00000,
+		.end	= 0x40b0001f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa27x_device_pwm0 = {
+	.name		= "pxa27x-pwm",
+	.id		= 0,
+	.resource	= pxa27x_resource_pwm0,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm0),
+};
+
+static struct resource pxa27x_resource_pwm1[] = {
+	[0] = {
+		.start	= 0x40c00000,
+		.end	= 0x40c0001f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa27x_device_pwm1 = {
+	.name		= "pxa27x-pwm",
+	.id		= 1,
+	.resource	= pxa27x_resource_pwm1,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm1),
+};
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+#ifdef CONFIG_PXA3xx
+static struct resource pxa3xx_resources_mci2[] = {
+	[0] = {
+		.start	= 0x42000000,
+		.end	= 0x42000fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_MMC2,
+		.end	= IRQ_MMC2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= 93,
+		.end	= 93,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= 94,
+		.end	= 94,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa3xx_device_mci2 = {
+	.name		= "pxa2xx-mci",
+	.id		= 1,
+	.dev		= {
+		.dma_mask = &pxamci_dmamask,
+		.coherent_dma_mask =	0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci2),
+	.resource	= pxa3xx_resources_mci2,
+};
+
+void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_mci2, info);
+}
+
+static struct resource pxa3xx_resources_mci3[] = {
+	[0] = {
+		.start	= 0x42500000,
+		.end	= 0x42500fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_MMC3,
+		.end	= IRQ_MMC3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= 100,
+		.end	= 100,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= 101,
+		.end	= 101,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa3xx_device_mci3 = {
+	.name		= "pxa2xx-mci",
+	.id		= 2,
+	.dev		= {
+		.dma_mask = &pxamci_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci3),
+	.resource	= pxa3xx_resources_mci3,
+};
+
+void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_mci3, info);
+}
+
+static struct resource pxa3xx_resources_gcu[] = {
+	{
+		.start	= 0x54000000,
+		.end	= 0x54000fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_GCU,
+		.end	= IRQ_GCU,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_gcu = {
+	.name		= "pxa3xx-gcu",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
+	.resource	= pxa3xx_resources_gcu,
+	.dev		= {
+		.dma_mask = &pxa3xx_gcu_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
+#endif /* CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA3xx)
+static struct resource pxa3xx_resources_i2c_power[] = {
+	{
+		.start  = 0x40f500c0,
+		.end    = 0x40f500d3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PWRI2C,
+		.end	= IRQ_PWRI2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+	.name		= "pxa3xx-pwri2c",
+	.id		= 1,
+	.resource	= pxa3xx_resources_i2c_power,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
+};
+
+static struct resource pxa3xx_resources_nand[] = {
+	[0] = {
+		.start	= 0x43100000,
+		.end	= 0x43100053,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NAND,
+		.end	= IRQ_NAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for Data DMA */
+		.start	= 97,
+		.end	= 97,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for Command DMA */
+		.start	= 99,
+		.end	= 99,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_nand = {
+	.name		= "pxa3xx-nand",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &pxa3xx_nand_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_nand),
+	.resource	= pxa3xx_resources_nand,
+};
+
+void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_nand, info);
+}
+
+static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa3xx_resource_ssp4[] = {
+	[0] = {
+		.start	= 0x41a00000,
+		.end	= 0x41a0003f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SSP4,
+		.end	= IRQ_SSP4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 2,
+		.end	= 2,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 3,
+		.end	= 3,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+/*
+ * PXA3xx SSP is basically equivalent to PXA27x.
+ * However, we need to register the device by the correct name in order to
+ * make the driver set the correct internal type, hence we provide specific
+ * platform_devices for each of them.
+ */
+struct platform_device pxa3xx_device_ssp1 = {
+	.name		= "pxa3xx-ssp",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &pxa27x_ssp1_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa27x_resource_ssp1,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp1),
+};
+
+struct platform_device pxa3xx_device_ssp2 = {
+	.name		= "pxa3xx-ssp",
+	.id		= 1,
+	.dev		= {
+		.dma_mask = &pxa27x_ssp2_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa27x_resource_ssp2,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp2),
+};
+
+struct platform_device pxa3xx_device_ssp3 = {
+	.name		= "pxa3xx-ssp",
+	.id		= 2,
+	.dev		= {
+		.dma_mask = &pxa27x_ssp3_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa27x_resource_ssp3,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp3),
+};
+
+struct platform_device pxa3xx_device_ssp4 = {
+	.name		= "pxa3xx-ssp",
+	.id		= 3,
+	.dev		= {
+		.dma_mask = &pxa3xx_ssp4_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa3xx_resource_ssp4,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
+};
+#endif /* CONFIG_PXA3xx */
+
+struct resource pxa_resource_gpio[] = {
+	{
+		.start	= 0x40e00000,
+		.end	= 0x40e0ffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_GPIO0,
+		.end	= IRQ_GPIO0,
+		.name	= "gpio0",
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= IRQ_GPIO1,
+		.end	= IRQ_GPIO1,
+		.name	= "gpio1",
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= IRQ_GPIO_2_x,
+		.end	= IRQ_GPIO_2_x,
+		.name	= "gpio_mux",
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa25x_device_gpio = {
+#ifdef CONFIG_CPU_PXA26x
+	.name		= "pxa26x-gpio",
+#else
+	.name		= "pxa25x-gpio",
+#endif
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
+	.resource	= pxa_resource_gpio,
+};
+
+struct platform_device pxa27x_device_gpio = {
+	.name		= "pxa27x-gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
+	.resource	= pxa_resource_gpio,
+};
+
+struct platform_device pxa3xx_device_gpio = {
+	.name		= "pxa3xx-gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
+	.resource	= pxa_resource_gpio,
+};
+
+struct platform_device pxa93x_device_gpio = {
+	.name		= "pxa93x-gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
+	.resource	= pxa_resource_gpio,
+};
+
+/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
+ * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+{
+	struct platform_device *pd;
+
+	pd = platform_device_alloc("pxa2xx-spi", id);
+	if (pd == NULL) {
+		printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
+		       id);
+		return;
+	}
+
+	pd->dev.platform_data = info;
+	platform_device_add(pd);
+}
+
+static struct mmp_dma_platdata pxa_dma_pdata = {
+	.dma_channels	= 0,
+	.nb_requestors	= 0,
+};
+
+static struct resource pxa_dma_resource[] = {
+	[0] = {
+		.start	= 0x40000000,
+		.end	= 0x4000ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_DMA,
+		.end	= IRQ_DMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxadma_dmamask = 0xffffffffUL;
+
+static struct platform_device pxa2xx_pxa_dma = {
+	.name		= "pxa-dma",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &pxadma_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxa_dma_resource),
+	.resource	= pxa_dma_resource,
+};
+
+void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
+{
+	pxa_dma_pdata.dma_channels = nb_channels;
+	pxa_dma_pdata.nb_requestors = nb_requestors;
+	pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
+}

arch/arm/mach-pxa/devices.h

@@ -0,0 +1,57 @@
+extern struct platform_device pxa_device_pmu;
+extern struct platform_device pxa_device_mci;
+extern struct platform_device pxa3xx_device_mci2;
+extern struct platform_device pxa3xx_device_mci3;
+extern struct platform_device pxa25x_device_udc;
+extern struct platform_device pxa27x_device_udc;
+extern struct platform_device pxa3xx_device_u2d;
+extern struct platform_device pxa_device_fb;
+extern struct platform_device pxa_device_ffuart;
+extern struct platform_device pxa_device_btuart;
+extern struct platform_device pxa_device_stuart;
+extern struct platform_device pxa_device_hwuart;
+extern struct platform_device pxa_device_i2c;
+extern struct platform_device pxa_device_i2s;
+extern struct platform_device pxa_device_ficp;
+extern struct platform_device sa1100_device_rtc;
+extern struct platform_device pxa_device_rtc;
+extern struct platform_device pxa_device_ac97;
+
+extern struct platform_device pxa27x_device_i2c_power;
+extern struct platform_device pxa27x_device_ohci;
+extern struct platform_device pxa27x_device_keypad;
+
+extern struct platform_device pxa25x_device_ssp;
+extern struct platform_device pxa25x_device_nssp;
+extern struct platform_device pxa25x_device_assp;
+extern struct platform_device pxa27x_device_ssp1;
+extern struct platform_device pxa27x_device_ssp2;
+extern struct platform_device pxa27x_device_ssp3;
+extern struct platform_device pxa3xx_device_ssp1;
+extern struct platform_device pxa3xx_device_ssp2;
+extern struct platform_device pxa3xx_device_ssp3;
+extern struct platform_device pxa3xx_device_ssp4;
+
+extern struct platform_device pxa25x_device_pwm0;
+extern struct platform_device pxa25x_device_pwm1;
+extern struct platform_device pxa27x_device_pwm0;
+extern struct platform_device pxa27x_device_pwm1;
+
+extern struct platform_device pxa3xx_device_nand;
+extern struct platform_device pxa3xx_device_i2c_power;
+
+extern struct platform_device pxa3xx_device_gcu;
+
+extern struct platform_device pxa_device_asoc_platform;
+extern struct platform_device pxa_device_asoc_ssp1;
+extern struct platform_device pxa_device_asoc_ssp2;
+extern struct platform_device pxa_device_asoc_ssp3;
+extern struct platform_device pxa_device_asoc_ssp4;
+
+extern struct platform_device pxa25x_device_gpio;
+extern struct platform_device pxa27x_device_gpio;
+extern struct platform_device pxa3xx_device_gpio;
+extern struct platform_device pxa93x_device_gpio;
+
+void __init pxa_register_device(struct platform_device *dev, void *data);
+void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);

arch/arm/mach-pxa/em-x270.c

@@ -0,0 +1,1333 @@
+/*
+ * Support for CompuLab EM-X270 platform
+ *
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <linux/dm9000.h>
+#include <linux/platform_data/rtc-v3020.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+#include <linux/mfd/da903x.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tdo24m.h>
+#include <linux/spi/libertas_spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/i2c/pxa-i2c.h>
+#include <linux/regulator/userspace-consumer.h>
+
+#include <media/soc_camera.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/media/camera-pxa.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/* EM-X270 specific GPIOs */
+#define GPIO13_MMC_CD		(13)
+#define GPIO95_MMC_WP		(95)
+#define GPIO56_NAND_RB		(56)
+#define GPIO93_CAM_RESET	(93)
+#define GPIO16_USB_HUB_RESET	(16)
+
+/* eXeda specific GPIOs */
+#define GPIO114_MMC_CD		(114)
+#define GPIO20_NAND_RB		(20)
+#define GPIO38_SD_PWEN		(38)
+#define GPIO37_WLAN_RST		(37)
+#define GPIO95_TOUCHPAD_INT	(95)
+#define GPIO130_CAM_RESET	(130)
+#define GPIO10_USB_HUB_RESET	(10)
+
+/* common  GPIOs */
+#define GPIO11_NAND_CS		(11)
+#define GPIO41_ETHIRQ		(41)
+#define EM_X270_ETHIRQ		PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ)
+#define GPIO115_WLAN_PWEN	(115)
+#define GPIO19_WLAN_STRAP	(19)
+#define GPIO9_USB_VBUS_EN	(9)
+
+static int mmc_cd;
+static int nand_rb;
+static int dm9000_flags;
+static int cam_reset;
+static int usb_hub_reset;
+
+static unsigned long common_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
+
+	/* QCI */
+	GPIO84_CIF_FV,
+	GPIO25_CIF_LV,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO81_CIF_DD_0,
+	GPIO55_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO50_CIF_DD_3,
+	GPIO52_CIF_DD_4,
+	GPIO48_CIF_DD_5,
+	GPIO17_CIF_DD_6,
+	GPIO12_CIF_DD_7,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* Keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO39_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO91_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO36_KP_MKIN_7	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO96_KP_MKOUT_6,
+	GPIO22_KP_MKOUT_7,
+
+	/* SSP1 */
+	GPIO26_SSP1_RXD,
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO57_SSP1_TXD,
+
+	/* SSP2 */
+	GPIO19_GPIO,	/* SSP2 clock is used as GPIO for Libertas pin-strap */
+	GPIO14_GPIO,
+	GPIO89_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* sleep/resume button */
+
+	/* power controls */
+	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
+	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+
+	/* interrupts */
+	GPIO41_GPIO,	/* DM9000 interrupt */
+};
+
+static unsigned long em_x270_pin_config[] = {
+	GPIO13_GPIO,				/* MMC card detect */
+	GPIO16_GPIO,				/* USB hub reset */
+	GPIO56_GPIO,				/* NAND Ready/Busy */
+	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
+	GPIO95_GPIO,				/* MMC Write protect */
+};
+
+static unsigned long exeda_pin_config[] = {
+	GPIO10_GPIO,				/* USB hub reset */
+	GPIO20_GPIO,				/* NAND Ready/Busy */
+	GPIO38_GPIO	| MFP_LPM_DRIVE_LOW,	/* SD slot power */
+	GPIO95_GPIO,				/* touchpad IRQ */
+	GPIO114_GPIO,				/* MMC card detect */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
+	[0] = {
+		.start = PXA_CS2_PHYS,
+		.end   = PXA_CS2_PHYS + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = PXA_CS2_PHYS + 8,
+		.end   = PXA_CS2_PHYS + 8 + 0x3f,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = EM_X270_ETHIRQ,
+		.end   = EM_X270_ETHIRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
+	.flags		= DM9000_PLATF_NO_EEPROM,
+};
+
+static struct platform_device em_x270_dm9000 = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(em_x270_dm9000_resource),
+	.resource	= em_x270_dm9000_resource,
+	.dev		= {
+		.platform_data = &em_x270_dm9000_platdata,
+	}
+};
+
+static void __init em_x270_init_dm9000(void)
+{
+	em_x270_dm9000_platdata.flags |= dm9000_flags;
+	platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
+static struct resource em_x270_v3020_resource[] = {
+	[0] = {
+		.start = PXA_CS4_PHYS,
+		.end   = PXA_CS4_PHYS + 3,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct v3020_platform_data em_x270_v3020_platdata = {
+	.leftshift = 0,
+};
+
+static struct platform_device em_x270_rtc = {
+	.name		= "v3020",
+	.num_resources	= ARRAY_SIZE(em_x270_v3020_resource),
+	.resource	= em_x270_v3020_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &em_x270_v3020_platdata,
+	}
+};
+
+static void __init em_x270_init_rtc(void)
+{
+	platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
+
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+static inline void nand_cs_on(void)
+{
+	gpio_set_value(GPIO11_NAND_CS, 0);
+}
+
+static void nand_cs_off(void)
+{
+	dsb();
+
+	gpio_set_value(GPIO11_NAND_CS, 1);
+}
+
+/* hardware specific access to control-lines */
+static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
+				 unsigned int ctrl)
+{
+	struct nand_chip *this = mtd_to_nand(mtd);
+	unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+
+	dsb();
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if (ctrl & NAND_ALE)
+			nandaddr |=  (1 << 3);
+		else
+			nandaddr &= ~(1 << 3);
+		if (ctrl & NAND_CLE)
+			nandaddr |=  (1 << 2);
+		else
+			nandaddr &= ~(1 << 2);
+		if (ctrl & NAND_NCE)
+			nand_cs_on();
+		else
+			nand_cs_off();
+	}
+
+	dsb();
+	this->IO_ADDR_W = (void __iomem *)nandaddr;
+	if (dat != NAND_CMD_NONE)
+		writel(dat, this->IO_ADDR_W);
+
+	dsb();
+}
+
+/* read device ready pin */
+static int em_x270_nand_device_ready(struct mtd_info *mtd)
+{
+	dsb();
+
+	return gpio_get_value(nand_rb);
+}
+
+static struct mtd_partition em_x270_partition_info[] = {
+	[0] = {
+		.name	= "em_x270-0",
+		.offset	= 0,
+		.size	= SZ_4M,
+	},
+	[1] = {
+		.name	= "em_x270-1",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+struct platform_nand_data em_x270_nand_platdata = {
+	.chip = {
+		.nr_chips = 1,
+		.chip_offset = 0,
+		.nr_partitions = ARRAY_SIZE(em_x270_partition_info),
+		.partitions = em_x270_partition_info,
+		.chip_delay = 20,
+	},
+	.ctrl = {
+		.hwcontrol = 0,
+		.dev_ready = em_x270_nand_device_ready,
+		.select_chip = 0,
+		.cmd_ctrl = em_x270_nand_cmd_ctl,
+	},
+};
+
+static struct resource em_x270_nand_resource[] = {
+	[0] = {
+		.start = PXA_CS1_PHYS,
+		.end   = PXA_CS1_PHYS + 12,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device em_x270_nand = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(em_x270_nand_resource),
+	.resource	= em_x270_nand_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &em_x270_nand_platdata,
+	}
+};
+
+static void __init em_x270_init_nand(void)
+{
+	int err;
+
+	err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+	if (err) {
+		pr_warn("EM-X270: failed to request NAND CS gpio\n");
+		return;
+	}
+
+	gpio_direction_output(GPIO11_NAND_CS, 1);
+
+	err = gpio_request(nand_rb, "NAND R/B");
+	if (err) {
+		pr_warn("EM-X270: failed to request NAND R/B gpio\n");
+		gpio_free(GPIO11_NAND_CS);
+		return;
+	}
+
+	gpio_direction_input(nand_rb);
+
+	platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition em_x270_nor_parts[] = {
+	{
+		.name =		"Bootloader",
+		.offset =	0x00000000,
+		.size =		0x00050000,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	}, {
+		.name =		"Environment",
+		.offset =	0x00050000,
+		.size =		0x00010000,
+	}, {
+		.name =		"Reserved",
+		.offset =	0x00060000,
+		.size =		0x00050000,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	}, {
+		.name =		"Splashscreen",
+		.offset =	0x000b0000,
+		.size =		0x00050000,
+	}
+};
+
+static struct physmap_flash_data em_x270_nor_data[] = {
+	[0] = {
+		.width = 2,
+		.parts = em_x270_nor_parts,
+		.nr_parts = ARRAY_SIZE(em_x270_nor_parts),
+	},
+};
+
+static struct resource em_x270_nor_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_1M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device em_x270_physmap_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= &em_x270_nor_flash_resource,
+	.dev		= {
+		.platform_data	= &em_x270_nor_data,
+	},
+};
+
+static void __init em_x270_init_nor(void)
+{
+	platform_device_register(&em_x270_physmap_flash);
+}
+#else
+static inline void em_x270_init_nor(void) {}
+#endif
+
+/* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct regulator *em_x270_usb_ldo;
+
+static int em_x270_usb_hub_init(void)
+{
+	int err;
+
+	em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
+	if (IS_ERR(em_x270_usb_ldo))
+		return PTR_ERR(em_x270_usb_ldo);
+
+	err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
+	if (err)
+		goto err_free_usb_ldo;
+
+	err = gpio_request(usb_hub_reset, "hub rst");
+	if (err)
+		goto err_free_vbus_gpio;
+
+	/* USB Hub power-on and reset */
+	gpio_direction_output(usb_hub_reset, 1);
+	gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
+	err = regulator_enable(em_x270_usb_ldo);
+	if (err)
+		goto err_free_rst_gpio;
+
+	gpio_set_value(usb_hub_reset, 0);
+	gpio_set_value(usb_hub_reset, 1);
+	regulator_disable(em_x270_usb_ldo);
+	err = regulator_enable(em_x270_usb_ldo);
+	if (err)
+		goto err_free_rst_gpio;
+
+	gpio_set_value(usb_hub_reset, 0);
+	gpio_set_value(GPIO9_USB_VBUS_EN, 1);
+
+	return 0;
+
+err_free_rst_gpio:
+	gpio_free(usb_hub_reset);
+err_free_vbus_gpio:
+	gpio_free(GPIO9_USB_VBUS_EN);
+err_free_usb_ldo:
+	regulator_put(em_x270_usb_ldo);
+
+	return err;
+}
+
+static int em_x270_ohci_init(struct device *dev)
+{
+	int err;
+
+	/* we don't want to entirely disable USB if the HUB init failed */
+	err = em_x270_usb_hub_init();
+	if (err)
+		pr_err("USB Hub initialization failed: %d\n", err);
+
+	/* enable port 2 transiever */
+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
+
+	return 0;
+}
+
+static void em_x270_ohci_exit(struct device *dev)
+{
+	gpio_free(usb_hub_reset);
+	gpio_free(GPIO9_USB_VBUS_EN);
+
+	if (!IS_ERR(em_x270_usb_ldo)) {
+		if (regulator_is_enabled(em_x270_usb_ldo))
+			regulator_disable(em_x270_usb_ldo);
+
+		regulator_put(em_x270_usb_ldo);
+	}
+}
+
+static struct pxaohci_platform_data em_x270_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+	.init		= em_x270_ohci_init,
+	.exit		= em_x270_ohci_exit,
+};
+
+static void __init em_x270_init_ohci(void)
+{
+	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
+
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+static struct regulator *em_x270_sdio_ldo;
+
+static int em_x270_mci_init(struct device *dev,
+			    irq_handler_t em_x270_detect_int,
+			    void *data)
+{
+	int err;
+
+	em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
+	if (IS_ERR(em_x270_sdio_ldo)) {
+		dev_err(dev, "can't request SDIO power supply: %ld\n",
+			PTR_ERR(em_x270_sdio_ldo));
+		return PTR_ERR(em_x270_sdio_ldo);
+	}
+
+	err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
+			      IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			      "MMC card detect", data);
+	if (err) {
+		dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
+		goto err_irq;
+	}
+
+	if (machine_is_em_x270()) {
+		err = gpio_request(GPIO95_MMC_WP, "MMC WP");
+		if (err) {
+			dev_err(dev, "can't request MMC write protect: %d\n",
+				err);
+			goto err_gpio_wp;
+		}
+		gpio_direction_input(GPIO95_MMC_WP);
+	} else {
+		err = gpio_request(GPIO38_SD_PWEN, "sdio power");
+		if (err) {
+			dev_err(dev, "can't request MMC power control : %d\n",
+				err);
+			goto err_gpio_wp;
+		}
+		gpio_direction_output(GPIO38_SD_PWEN, 1);
+	}
+
+	return 0;
+
+err_gpio_wp:
+	free_irq(gpio_to_irq(mmc_cd), data);
+err_irq:
+	regulator_put(em_x270_sdio_ldo);
+
+	return err;
+}
+
+static int em_x270_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data* p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask) {
+		int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
+
+		regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
+		return regulator_enable(em_x270_sdio_ldo);
+	} else {
+		regulator_disable(em_x270_sdio_ldo);
+	}
+	return 0;
+}
+
+static void em_x270_mci_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(mmc_cd), data);
+	regulator_put(em_x270_sdio_ldo);
+
+	if (machine_is_em_x270())
+		gpio_free(GPIO95_MMC_WP);
+	else
+		gpio_free(GPIO38_SD_PWEN);
+}
+
+static int em_x270_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO95_MMC_WP);
+}
+
+static struct pxamci_platform_data em_x270_mci_platform_data = {
+	.detect_delay_ms	= 250,
+	.ocr_mask		= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+				  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+				  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+				  MMC_VDD_30_31|MMC_VDD_31_32,
+	.init 			= em_x270_mci_init,
+	.setpower 		= em_x270_mci_setpower,
+	.exit			= em_x270_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+};
+
+static void __init em_x270_init_mmc(void)
+{
+	if (machine_is_em_x270())
+		em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
+
+	pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
+/* LCD */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info em_x270_lcd_modes[] = {
+	[0] = {
+		.pixclock	= 38250,
+		.bpp		= 16,
+		.xres		= 480,
+		.yres		= 640,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 2,
+		.right_margin	= 24,
+		.lower_margin	= 4,
+		.sync		= 0,
+	},
+	[1] = {
+		.pixclock       = 153800,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 2,
+		.right_margin	= 88,
+		.lower_margin	= 2,
+		.sync		= 0,
+	},
+};
+
+static struct pxafb_mach_info em_x270_lcd = {
+	.modes		= em_x270_lcd_modes,
+	.num_modes	= 2,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+};
+
+static void __init em_x270_init_lcd(void)
+{
+	pxa_set_fb_info(NULL, &em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master em_x270_spi_info = {
+	.num_chipselect	= 1,
+};
+
+static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.gpio_cs	= -1,
+};
+
+static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
+	.model = TDO35S,
+};
+
+static struct pxa2xx_spi_master em_x270_spi_2_info = {
+	.num_chipselect	= 1,
+	.enable_dma	= 1,
+};
+
+static struct pxa2xx_spi_chip em_x270_libertas_chip = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.timeout	= 1000,
+	.gpio_cs	= 14,
+};
+
+static unsigned long em_x270_libertas_pin_config[] = {
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_GPIO,
+	GPIO89_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+};
+
+static int em_x270_libertas_setup(struct spi_device *spi)
+{
+	int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
+	if (err)
+		return err;
+
+	err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+	if (err)
+		goto err_free_pwen;
+
+	if (machine_is_exeda()) {
+		err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
+		if (err)
+			goto err_free_strap;
+
+		gpio_direction_output(GPIO37_WLAN_RST, 1);
+		msleep(100);
+	}
+
+	gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+	msleep(100);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
+
+	gpio_direction_output(GPIO115_WLAN_PWEN, 0);
+	msleep(100);
+	gpio_set_value(GPIO115_WLAN_PWEN, 1);
+	msleep(100);
+
+	spi->bits_per_word = 16;
+	spi_setup(spi);
+
+	return 0;
+
+err_free_strap:
+	gpio_free(GPIO19_WLAN_STRAP);
+err_free_pwen:
+	gpio_free(GPIO115_WLAN_PWEN);
+
+	return err;
+}
+
+static int em_x270_libertas_teardown(struct spi_device *spi)
+{
+	gpio_set_value(GPIO115_WLAN_PWEN, 0);
+	gpio_free(GPIO115_WLAN_PWEN);
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	if (machine_is_exeda()) {
+		gpio_set_value(GPIO37_WLAN_RST, 0);
+		gpio_free(GPIO37_WLAN_RST);
+	}
+
+	return 0;
+}
+
+struct libertas_spi_platform_data em_x270_libertas_pdata = {
+	.use_dummy_writes	= 1,
+	.setup			= em_x270_libertas_setup,
+	.teardown		= em_x270_libertas_teardown,
+};
+
+static struct spi_board_info em_x270_spi_devices[] __initdata = {
+	{
+		.modalias		= "tdo24m",
+		.max_speed_hz		= 1000000,
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.controller_data	= &em_x270_tdo24m_chip,
+		.platform_data		= &em_x270_tdo24m_pdata,
+	},
+	{
+		.modalias		= "libertas_spi",
+		.max_speed_hz		= 13000000,
+		.bus_num		= 2,
+		.irq			= PXA_GPIO_TO_IRQ(116),
+		.chip_select		= 0,
+		.controller_data	= &em_x270_libertas_chip,
+		.platform_data		= &em_x270_libertas_pdata,
+	},
+};
+
+static void __init em_x270_init_spi(void)
+{
+	pxa2xx_set_spi_info(1, &em_x270_spi_info);
+	pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
+	spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
+}
+#else
+static inline void em_x270_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static pxa2xx_audio_ops_t em_x270_ac97_info = {
+	.reset_gpio = 113,
+};
+
+static void __init em_x270_init_ac97(void)
+{
+	pxa_set_ac97_info(&em_x270_ac97_info);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static const unsigned int em_x270_module_matrix_keys[] = {
+	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
+
+static struct matrix_keymap_data em_x270_matrix_keymap_data = {
+	.keymap			= em_x270_module_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(em_x270_module_matrix_keys),
+};
+
+struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
+	/* code map for the matrix keys */
+	.matrix_key_rows	= 3,
+	.matrix_key_cols	= 3,
+	.matrix_keymap_data	= &em_x270_matrix_keymap_data,
+};
+
+static const unsigned int em_x270_exeda_matrix_keys[] = {
+	KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
+	KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
+	KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
+	KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
+
+	KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
+	KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
+	KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
+	KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
+
+	KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
+	KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
+	KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
+	KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
+
+	KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
+	KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
+	KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
+	KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
+
+	KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
+	KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
+	KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
+	KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
+
+	KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
+	KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
+	KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
+	KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
+
+	KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
+	KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
+	KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
+	KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
+
+	KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
+	KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
+	KEY(7, 4, 0), KEY(7, 5, 0),
+	KEY(7, 6, 0), KEY(7, 7, 0),
+};
+
+static struct matrix_keymap_data em_x270_exeda_matrix_keymap_data = {
+	.keymap			= em_x270_exeda_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(em_x270_exeda_matrix_keys),
+};
+
+struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
+	/* code map for the matrix keys */
+	.matrix_key_rows	= 8,
+	.matrix_key_cols	= 8,
+	.matrix_keymap_data	= &em_x270_exeda_matrix_keymap_data,
+};
+
+static void __init em_x270_init_keypad(void)
+{
+	if (machine_is_em_x270())
+		pxa_set_keypad_info(&em_x270_module_keypad_info);
+	else
+		pxa_set_keypad_info(&em_x270_exeda_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+	[0] = {
+		.desc	= "sleep/wakeup",
+		.code	= KEY_SUSPEND,
+		.type	= EV_PWR,
+		.gpio	= 1,
+		.wakeup	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+	.buttons	= gpio_keys_button,
+	.nbuttons	= 1,
+};
+
+static struct platform_device em_x270_gpio_keys = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &em_x270_gpio_keys_data,
+	},
+};
+
+static void __init em_x270_init_gpio_keys(void)
+{
+	platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
+
+/* Quick Capture Interface and sensor setup */
+#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static struct regulator *em_x270_camera_ldo;
+
+static int em_x270_sensor_init(void)
+{
+	int ret;
+
+	ret = gpio_request(cam_reset, "camera reset");
+	if (ret)
+		return ret;
+
+	gpio_direction_output(cam_reset, 0);
+
+	em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
+	if (em_x270_camera_ldo == NULL) {
+		gpio_free(cam_reset);
+		return -ENODEV;
+	}
+
+	ret = regulator_enable(em_x270_camera_ldo);
+	if (ret) {
+		regulator_put(em_x270_camera_ldo);
+		gpio_free(cam_reset);
+		return ret;
+	}
+
+	gpio_set_value(cam_reset, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data em_x270_camera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 2600,
+};
+
+static int em_x270_sensor_power(struct device *dev, int on)
+{
+	int ret;
+	int is_on = regulator_is_enabled(em_x270_camera_ldo);
+
+	if (on == is_on)
+		return 0;
+
+	gpio_set_value(cam_reset, !on);
+
+	if (on)
+		ret = regulator_enable(em_x270_camera_ldo);
+	else
+		ret = regulator_disable(em_x270_camera_ldo);
+
+	if (ret)
+		return ret;
+
+	gpio_set_value(cam_reset, on);
+
+	return 0;
+}
+
+static struct i2c_board_info em_x270_i2c_cam_info[] = {
+	{
+		I2C_BOARD_INFO("mt9m111", 0x48),
+	},
+};
+
+static struct soc_camera_link iclink = {
+	.bus_id		= 0,
+	.power		= em_x270_sensor_power,
+	.board_info	= &em_x270_i2c_cam_info[0],
+	.i2c_adapter_id	= 0,
+};
+
+static struct platform_device em_x270_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &iclink,
+	},
+};
+
+static void  __init em_x270_init_camera(void)
+{
+	if (em_x270_sensor_init() == 0) {
+		pxa_set_camera_info(&em_x270_camera_platform_data);
+		platform_device_register(&em_x270_camera);
+	}
+}
+#else
+static inline void em_x270_init_camera(void) {}
+#endif
+
+static struct regulator_bulk_data em_x270_gps_consumer_supply = {
+	.supply		= "vcc gps",
+};
+
+static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = {
+	.name		= "vcc gps",
+	.num_supplies	= 1,
+	.supplies	= &em_x270_gps_consumer_supply,
+};
+
+static struct platform_device em_x270_gps_userspace_consumer = {
+	.name		= "reg-userspace-consumer",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &em_x270_gps_consumer_data,
+	},
+};
+
+static struct regulator_bulk_data em_x270_gprs_consumer_supply = {
+	.supply		= "vcc gprs",
+};
+
+static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = {
+	.name		= "vcc gprs",
+	.num_supplies	= 1,
+	.supplies	= &em_x270_gprs_consumer_supply
+};
+
+static struct platform_device em_x270_gprs_userspace_consumer = {
+	.name		= "reg-userspace-consumer",
+	.id		= 1,
+	.dev		= {
+		.platform_data = &em_x270_gprs_consumer_data,
+	}
+};
+
+static struct platform_device *em_x270_userspace_consumers[] = {
+	&em_x270_gps_userspace_consumer,
+	&em_x270_gprs_userspace_consumer,
+};
+
+static void __init em_x270_userspace_consumers_init(void)
+{
+	platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers));
+}
+
+/* DA9030 related initializations */
+#define REGULATOR_CONSUMER(_name, _dev_name, _supply)		        \
+	static struct regulator_consumer_supply _name##_consumers[] = {	\
+		REGULATOR_SUPPLY(_supply, _dev_name),			\
+	}
+
+REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps");
+REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
+REGULATOR_CONSUMER(ldo10, "pxa2xx-mci", "vcc sdio");
+REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
+REGULATOR_CONSUMER(ldo19, "reg-userspace-consumer.1", "vcc gprs");
+REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
+
+#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask)		\
+	static struct regulator_init_data _ldo##_data = {		\
+		.constraints = {					\
+			.min_uV = _min_uV,				\
+			.max_uV = _max_uV,				\
+			.state_mem = {					\
+				.enabled = 0,				\
+			},						\
+			.valid_ops_mask = _ops_mask,			\
+			.apply_uV = 1,					\
+		},							\
+		.num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers),	\
+		.consumer_supplies = _ldo##_consumers,			\
+	};
+
+REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo10, 2000000, 3200000,
+	       REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
+REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
+
+struct led_info em_x270_led_info = {
+	.name = "em-x270:orange",
+	.default_trigger = "battery-charging-or-full",
+};
+
+struct power_supply_info em_x270_psy_info = {
+	.name = "battery",
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.voltage_max_design = 4200000,
+	.voltage_min_design = 3000000,
+	.use_for_apm = 1,
+};
+
+static void em_x270_battery_low(void)
+{
+#if defined(CONFIG_APM_EMULATION)
+	apm_queue_event(APM_LOW_BATTERY);
+#endif
+}
+
+static void em_x270_battery_critical(void)
+{
+#if defined(CONFIG_APM_EMULATION)
+	apm_queue_event(APM_CRITICAL_SUSPEND);
+#endif
+}
+
+struct da9030_battery_info em_x270_batterty_info = {
+	.battery_info = &em_x270_psy_info,
+
+	.charge_milliamp = 1000,
+	.charge_millivolt = 4200,
+
+	.vbat_low = 3600,
+	.vbat_crit = 3400,
+	.vbat_charge_start = 4100,
+	.vbat_charge_stop = 4200,
+	.vbat_charge_restart = 4000,
+
+	.vcharge_min = 3200,
+	.vcharge_max = 5500,
+
+	.tbat_low = 197,
+	.tbat_high = 78,
+	.tbat_restart = 100,
+
+	.batmon_interval = 0,
+
+	.battery_low = em_x270_battery_low,
+	.battery_critical = em_x270_battery_critical,
+};
+
+#define DA9030_SUBDEV(_name, _id, _pdata)	\
+	{					\
+		.name = "da903x-" #_name,	\
+		.id = DA9030_ID_##_id,		\
+		.platform_data = _pdata,	\
+	}
+
+#define DA9030_LDO(num)	DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
+
+struct da903x_subdev_info em_x270_da9030_subdevs[] = {
+	DA9030_LDO(3),
+	DA9030_LDO(5),
+	DA9030_LDO(10),
+	DA9030_LDO(12),
+	DA9030_LDO(19),
+
+	DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
+
+	DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
+	DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
+	DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
+};
+
+static struct da903x_platform_data em_x270_da9030_info = {
+	.num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
+	.subdevs = em_x270_da9030_subdevs,
+};
+
+static struct i2c_board_info em_x270_i2c_pmic_info = {
+	I2C_BOARD_INFO("da9030", 0x49),
+	.irq = PXA_GPIO_TO_IRQ(0),
+	.platform_data = &em_x270_da9030_info,
+};
+
+static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
+	.use_pio = 1,
+};
+
+static void __init em_x270_init_da9030(void)
+{
+	pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
+	i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
+}
+
+static struct pca953x_platform_data exeda_gpio_ext_pdata = {
+	.gpio_base = 128,
+};
+
+static struct i2c_board_info exeda_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("pca9555", 0x21),
+		.platform_data = &exeda_gpio_ext_pdata,
+	},
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+	.fast_mode = 1,
+};
+
+static void __init em_x270_init_i2c(void)
+{
+	pxa_set_i2c_info(&em_x270_i2c_info);
+
+	if (machine_is_exeda())
+		i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
+}
+
+static void __init em_x270_module_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+	mmc_cd = GPIO13_MMC_CD;
+	nand_rb = GPIO56_NAND_RB;
+	dm9000_flags = DM9000_PLATF_32BITONLY;
+	cam_reset = GPIO93_CAM_RESET;
+	usb_hub_reset = GPIO16_USB_HUB_RESET;
+}
+
+static void __init em_x270_exeda_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
+
+	mmc_cd = GPIO114_MMC_CD;
+	nand_rb = GPIO20_NAND_RB;
+	dm9000_flags = DM9000_PLATF_16BITONLY;
+	cam_reset = GPIO130_CAM_RESET;
+	usb_hub_reset = GPIO10_USB_HUB_RESET;
+}
+
+static void __init em_x270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+#ifdef CONFIG_PM
+	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
+	if (machine_is_em_x270())
+		em_x270_module_init();
+	else if (machine_is_exeda())
+		em_x270_exeda_init();
+	else
+		panic("Unsupported machine: %d\n", machine_arch_type);
+
+	em_x270_init_da9030();
+	em_x270_init_dm9000();
+	em_x270_init_rtc();
+	em_x270_init_nand();
+	em_x270_init_nor();
+	em_x270_init_lcd();
+	em_x270_init_mmc();
+	em_x270_init_ohci();
+	em_x270_init_keypad();
+	em_x270_init_gpio_keys();
+	em_x270_init_ac97();
+	em_x270_init_spi();
+	em_x270_init_i2c();
+	em_x270_init_camera();
+	em_x270_userspace_consumers_init();
+
+	regulator_has_full_constraints();
+}
+
+MACHINE_START(EM_X270, "Compulab EM-X270")
+	.atag_offset	= 0x100,
+	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
+	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine	= em_x270_init,
+	.restart	= pxa_restart,
+MACHINE_END
+
+MACHINE_START(EXEDA, "Compulab eXeda")
+	.atag_offset	= 0x100,
+	.map_io		= pxa27x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
+	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine	= em_x270_init,
+	.restart	= pxa_restart,
+MACHINE_END

arch/arm/mach-pxa/eseries-irq.h

@@ -0,0 +1,28 @@
+/*
+ *  eseries-irq.h
+ *
+ *  Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
+#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n))
+
+#define ANGELX_RDY0_IRQ IRQ_ANGELX(0)
+#define ANGELX_ST0_IRQ  IRQ_ANGELX(1)
+#define ANGELX_CD0_IRQ  IRQ_ANGELX(2)
+#define ANGELX_RDY1_IRQ IRQ_ANGELX(3)
+#define ANGELX_ST1_IRQ  IRQ_ANGELX(4)
+#define ANGELX_CD1_IRQ  IRQ_ANGELX(5)
+
+#define TMIO_IRQ_BASE (IRQ_BOARD_START+0)
+#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n))
+
+#define TMIO_SD_IRQ     IRQ_TMIO(1)
+#define TMIO_USB_IRQ    IRQ_TMIO(2)
+
+#define ESERIES_NR_IRQS	(IRQ_BOARD_START + 16)

arch/arm/mach-pxa/eseries.c

@@ -0,0 +1,968 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/clkdev.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk-provider.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/tc6387xb.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/t7l66xb.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/memblock.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include "pxa25x.h"
+#include <mach/eseries-gpio.h>
+#include "eseries-irq.h"
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include "udc.h"
+#include <linux/platform_data/irda-pxaficp.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Only e800 has 128MB RAM */
+void __init eseries_fixup(struct tag *tags, char **cmdline)
+{
+	if (machine_is_e800())
+		memblock_add(0xa0000000, SZ_128M);
+	else
+		memblock_add(0xa0000000, SZ_64M);
+}
+
+struct gpio_vbus_mach_info e7xx_udc_info = {
+	.gpio_vbus   = GPIO_E7XX_USB_DISC,
+	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static struct platform_device e7xx_gpio_vbus __maybe_unused = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &e7xx_udc_info,
+	},
+};
+
+struct pxaficp_platform_data e7xx_ficp_platform_data = {
+	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+};
+
+int eseries_tmio_enable(struct platform_device *dev)
+{
+	/* Reset - bring SUSPEND high before PCLR */
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
+	msleep(1);
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
+	msleep(1);
+	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
+	msleep(1);
+	return 0;
+}
+
+int eseries_tmio_disable(struct platform_device *dev)
+{
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
+	return 0;
+}
+
+int eseries_tmio_suspend(struct platform_device *dev)
+{
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	return 0;
+}
+
+int eseries_tmio_resume(struct platform_device *dev)
+{
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
+	msleep(1);
+	return 0;
+}
+
+void eseries_get_tmio_gpios(void)
+{
+	gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
+	gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
+	gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
+}
+
+/* TMIO controller uses the same resources on all e-series machines. */
+struct resource eseries_tmio_resources[] = {
+	[0] = {
+		.start  = PXA_CS4_PHYS,
+		.end    = PXA_CS4_PHYS + 0x1fffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
+		.end    = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+/* Some e-series hardware cannot control the 32K clock */
+static void __init __maybe_unused eseries_register_clks(void)
+{
+	clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, 0, 32768);
+}
+
+#ifdef CONFIG_MACH_E330
+/* -------------------- e330 tc6387xb parameters -------------------- */
+
+static struct tc6387xb_platform_data e330_tc6387xb_info = {
+	.enable   = &eseries_tmio_enable,
+	.disable  = &eseries_tmio_disable,
+	.suspend  = &eseries_tmio_suspend,
+	.resume   = &eseries_tmio_resume,
+};
+
+static struct platform_device e330_tc6387xb_device = {
+	.name           = "tc6387xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e330_tc6387xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* --------------------------------------------------------------- */
+
+static struct platform_device *e330_devices[] __initdata = {
+	&e330_tc6387xb_device,
+	&e7xx_gpio_vbus,
+};
+
+static void __init e330_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
+}
+
+MACHINE_START(E330, "Toshiba e330")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.atag_offset	= 0x100,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e330_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E350
+/* -------------------- e350 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e350_t7l66xb_info = {
+	.irq_base               = IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e350_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e350_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e350_devices[] __initdata = {
+	&e350_t7l66xb_device,
+	&e7xx_gpio_vbus,
+};
+
+static void __init e350_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
+}
+
+MACHINE_START(E350, "Toshiba e350")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.atag_offset	= 0x100,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e350_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E400
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static struct mtd_partition partition_a = {
+	.name = "Internal NAND flash",
+	.offset =  0,
+	.size =  MTDPART_SIZ_FULL,
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static struct tmio_nand_data e400_t7l66xb_nand_config = {
+	.num_partitions = 1,
+	.partition = &partition_a,
+	.badblock_pattern = &e400_t7l66xb_nand_bbt,
+};
+
+static struct t7l66xb_platform_data e400_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+
+	.nand_data              = &e400_t7l66xb_nand_config,
+};
+
+static struct platform_device e400_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e400_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e400_devices[] __initdata = {
+	&e400_t7l66xb_device,
+	&e7xx_gpio_vbus,
+};
+
+static void __init e400_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	/* Fixme - e400 may have a switched clock */
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
+	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
+}
+
+MACHINE_START(E400, "Toshiba e400")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.atag_offset	= 0x100,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e400_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E740
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* UDC */
+	GPIO13_GPIO,
+	GPIO3_GPIO,
+
+	/* IrDA */
+	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* Audio power control */
+	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
+	GPIO40_GPIO,  /* Mic amp power */
+	GPIO41_GPIO,  /* Headphone amp power */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* -------------------- e740 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e740_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e740_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e740_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+static struct platform_device e740_audio_device = {
+	.name		= "e740-audio",
+	.id		= -1,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e740_devices[] __initdata = {
+	&e740_fb_device,
+	&e740_t7l66xb_device,
+	&e7xx_gpio_vbus,
+	&e740_audio_device,
+};
+
+static void __init e740_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
+			"UDCCLK", &pxa25x_device_udc.dev),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.atag_offset	= 0x100,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e740_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E750
+/* ---------------------- E750 LCD definitions -------------------- */
+
+static struct w100_gen_regs e750_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x00000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00fff003,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 21,
+	.right_margin    = 22,
+	.upper_margin    = 5,
+	.lower_margin    = 4,
+	.crtc_ss         = 0x80150014,
+	.crtc_ls         = 0x8014000d,
+	.crtc_gs         = 0xc1000005,
+	.crtc_vpos_gs    = 0x00020147,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa1700030,
+	.crtc_gclk       = 0x80cc0015,
+	.crtc_goe        = 0x80cc0015,
+	.crtc_ps1_active = 0x61060017,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+	.init_data1 = 0x01192f1b,
+	.gpio_dir1  = 0xd5ffdeff,
+	.gpio_oe1   = 0x000020bf,
+	.init_data2 = 0x010f010f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+	.modelist   = &e750_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e750_lcd_regs,
+	.gpio       = &e750_w100_gpio_info,
+	.xtal_freq  = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e750_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e750_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e750_fb_resources),
+	.resource       = e750_fb_resources,
+};
+
+/* -------------------- e750 MFP parameters -------------------- */
+
+static unsigned long e750_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO11_3_6MHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* UDC */
+	GPIO13_GPIO,
+	GPIO3_GPIO,
+
+	/* IrDA */
+	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* Audio power control */
+	GPIO4_GPIO,  /* Headphone amp power */
+	GPIO7_GPIO,  /* Speaker amp power */
+	GPIO37_GPIO, /* Headphone detect */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	/* GPIO11_GPIO,  IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------- e750 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e750_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e750_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e750_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+static struct platform_device e750_audio_device = {
+	.name		= "e750-audio",
+	.id		= -1,
+};
+
+/* ------------------------------------------------------------- */
+
+static struct platform_device *e750_devices[] __initdata = {
+	&e750_fb_device,
+	&e750_tc6393xb_device,
+	&e7xx_gpio_vbus,
+	&e750_audio_device,
+};
+
+static void __init e750_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E750, "Toshiba e750")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.atag_offset	= 0x100,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e750_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E800
+/* ------------------------ e800 LCD definitions ------------------------- */
+
+static unsigned long e800_pin_config[] __initdata = {
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* tc6393xb */
+	GPIO11_3_6MHz,
+};
+
+static struct w100_gen_regs e800_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x02a00000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x000ff2a3,
+	.genlcd_cntl2 =          0x000002a3,
+	.genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+	[0] = {
+		.xres            = 480,
+		.yres            = 640,
+		.left_margin     = 52,
+		.right_margin    = 148,
+		.upper_margin    = 2,
+		.lower_margin    = 6,
+		.crtc_ss         = 0x80350034,
+		.crtc_ls         = 0x802b0026,
+		.crtc_gs         = 0x80160016,
+		.crtc_vpos_gs    = 0x00020003,
+		.crtc_rev        = 0x0040001d,
+		.crtc_dclk       = 0xe0000000,
+		.crtc_gclk       = 0x82a50049,
+		.crtc_goe        = 0x80ee001c,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 128,
+		.pixclk_divider         = 4,
+		.pixclk_divider_rotated = 6,
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	},
+	[1] = {
+		.xres            = 240,
+		.yres            = 320,
+		.left_margin     = 15,
+		.right_margin    = 88,
+		.upper_margin    = 0,
+		.lower_margin    = 7,
+		.crtc_ss         = 0xd010000f,
+		.crtc_ls         = 0x80070003,
+		.crtc_gs         = 0x80000000,
+		.crtc_vpos_gs    = 0x01460147,
+		.crtc_rev        = 0x00400003,
+		.crtc_dclk       = 0xa1700030,
+		.crtc_gclk       = 0x814b0008,
+		.crtc_goe        = 0x80cc0015,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 100,
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
+		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	}
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+	.init_data1 = 0xc13fc019,
+	.gpio_dir1  = 0x3e40df7f,
+	.gpio_oe1   = 0x003c3000,
+	.init_data2 = 0x00000000,
+	.gpio_dir2  = 0x00000000,
+	.gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x10001545,
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+	unsigned long tmp;
+
+	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+	if (par->mode->xres == 480)
+		tmp |= 0x100;
+	else
+		tmp &= ~0x100;
+	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+	.change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+	.modelist   = e800_lcd_mode,
+	.num_modes  = 2,
+	.regs       = &e800_lcd_regs,
+	.gpio       = &e800_w100_gpio_info,
+	.mem        = &e800_w100_mem_info,
+	.tg         = &e800_tg_info,
+	.xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e800_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e800_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e800_fb_resources),
+	.resource       = e800_fb_resources,
+};
+
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct gpio_vbus_mach_info e800_udc_info = {
+	.gpio_vbus   = GPIO_E800_USB_DISC,
+	.gpio_pullup = GPIO_E800_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static struct platform_device e800_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &e800_udc_info,
+	},
+};
+
+
+/* ----------------- e800 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e800_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e800_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e800_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+static struct platform_device e800_audio_device = {
+	.name		= "e800-audio",
+	.id		= -1,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e800_devices[] __initdata = {
+	&e800_fb_device,
+	&e800_tc6393xb_device,
+	&e800_gpio_vbus,
+	&e800_audio_device,
+};
+
+static void __init e800_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
+	pxa_set_ac97_info(NULL);
+}
+
+MACHINE_START(E800, "Toshiba e800")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.atag_offset	= 0x100,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e800_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif

arch/arm/mach-pxa/ezx.c

@@ -0,0 +1,1278 @@
+/*
+ *  ezx.c - Common code for the EZX platform.
+ *
+ *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
+ *		  2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
+ *		  2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds-lp3944.h>
+#include <linux/i2c/pxa-i2c.h>
+
+#include <media/soc_camera.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa27x.h"
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <mach/hardware.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <linux/platform_data/media/camera-pxa.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define EZX_NR_IRQS			(IRQ_BOARD_START + 24)
+
+#define GPIO12_A780_FLIP_LID 		12
+#define GPIO15_A1200_FLIP_LID 		15
+#define GPIO15_A910_FLIP_LID 		15
+#define GPIO12_E680_LOCK_SWITCH 	12
+#define GPIO15_E6_LOCK_SWITCH 		15
+#define GPIO50_nCAM_EN			50
+#define GPIO19_GEN1_CAM_RST		19
+#define GPIO28_GEN2_CAM_RST		28
+
+static struct pwm_lookup ezx_pwm_lookup[] __maybe_unused = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700,
+		   PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data ezx_backlight_data = {
+	.max_brightness	= 1023,
+	.dft_brightness	= 1023,
+	.enable_gpio	= -1,
+};
+
+static struct platform_device ezx_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &pxa27x_device_pwm0.dev,
+		.platform_data = &ezx_backlight_data,
+	},
+};
+
+static struct pxafb_mode_info mode_ezx_old = {
+	.pixclock		= 150000,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_1 __maybe_unused = {
+	.modes		= &mode_ezx_old,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+};
+
+static struct pxafb_mode_info mode_72r89803y01 = {
+	.pixclock		= 192308,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 32,
+	.depth			= 18,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_2 __maybe_unused = {
+	.modes		= &mode_72r89803y01,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_18BPP,
+};
+
+static struct platform_device *ezx_devices[] __initdata __maybe_unused = {
+	&ezx_backlight_device,
+};
+
+static unsigned long ezx_pin_config[] __initdata __maybe_unused = {
+	/* PWM backlight */
+	GPIO16_PWM0_OUT,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* PCAP SSP */
+	GPIO29_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO24_GPIO,				/* pcap chip select */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* pcap interrupt */
+	GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,	/* WDI_AP */
+	GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,	/* SYS_RESTART */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO11_GPIO,				/* mmc detect */
+
+	/* usb to external transceiver */
+	GPIO34_USB_P2_2,
+	GPIO35_USB_P2_1,
+	GPIO36_USB_P2_4,
+	GPIO39_USB_P2_6,
+	GPIO40_USB_P2_5,
+	GPIO53_USB_P2_3,
+
+	/* usb to Neptune GSM chip */
+	GPIO30_USB_P3_2,
+	GPIO31_USB_P3_6,
+	GPIO90_USB_P3_5,
+	GPIO91_USB_P3_1,
+	GPIO56_USB_P3_4,
+	GPIO113_USB_P3_3,
+};
+
+#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
+static unsigned long gen1_pin_config[] __initdata = {
+	/* flip / lockswitch */
+	GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* bluetooth (bcm2035) */
+	GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
+	GPIO48_GPIO,				/* RESET */
+	GPIO28_GPIO,				/* WAKEUP */
+
+	/* Neptune handshake */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
+	GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
+	GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI2 */
+	GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
+	GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,	/* TC_MM_EN */
+
+	/* sound */
+	GPIO52_SSP3_SCLK,
+	GPIO83_SSP3_SFRM,
+	GPIO81_SSP3_TXD,
+	GPIO89_SSP3_RXD,
+
+	/* ssp2 pins to in */
+	GPIO22_GPIO,				/* SSP2_SCLK */
+	GPIO37_GPIO,				/* SSP2_SFRM */
+	GPIO38_GPIO,				/* SSP2_TXD */
+	GPIO88_GPIO,				/* SSP2_RXD */
+
+	/* camera */
+	GPIO23_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO85_CIF_LV,
+	GPIO84_CIF_FV,
+	GPIO27_CIF_DD_0,
+	GPIO114_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO115_CIF_DD_3,
+	GPIO95_CIF_DD_4,
+	GPIO94_CIF_DD_5,
+	GPIO17_CIF_DD_6,
+	GPIO108_CIF_DD_7,
+	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
+	GPIO19_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
+
+	/* EMU */
+	GPIO120_GPIO,				/* EMU_MUX1 */
+	GPIO119_GPIO,				/* EMU_MUX2 */
+	GPIO86_GPIO,				/* SNP_INT_CTL */
+	GPIO87_GPIO,				/* SNP_INT_IN */
+};
+#endif
+
+#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
+	defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
+static unsigned long gen2_pin_config[] __initdata = {
+	/* flip / lockswitch */
+	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* EOC */
+	GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
+
+	/* bluetooth (bcm2045) */
+	GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
+	GPIO37_GPIO,				/* RESET */
+	GPIO57_GPIO,				/* WAKEUP */
+
+	/* Neptune handshake */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
+	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,	/* WDI */
+	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
+	GPIO41_GPIO,				/* BP_FLASH */
+
+	/* sound */
+	GPIO52_SSP3_SCLK,
+	GPIO83_SSP3_SFRM,
+	GPIO81_SSP3_TXD,
+	GPIO82_SSP3_RXD,
+
+	/* ssp2 pins to in */
+	GPIO22_GPIO,				/* SSP2_SCLK */
+	GPIO14_GPIO,				/* SSP2_SFRM */
+	GPIO38_GPIO,				/* SSP2_TXD */
+	GPIO88_GPIO,				/* SSP2_RXD */
+
+	/* camera */
+	GPIO23_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO85_CIF_LV,
+	GPIO84_CIF_FV,
+	GPIO27_CIF_DD_0,
+	GPIO114_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO115_CIF_DD_3,
+	GPIO95_CIF_DD_4,
+	GPIO48_CIF_DD_5,
+	GPIO93_CIF_DD_6,
+	GPIO12_CIF_DD_7,
+	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
+	GPIO28_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
+	GPIO17_GPIO,				/* CAM_FLASH */
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A780
+static unsigned long a780_pin_config[] __initdata = {
+	/* keypad */
+	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+
+	/* attenuate sound */
+	GPIO96_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+static unsigned long e680_pin_config[] __initdata = {
+	/* keypad */
+	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+
+	/* MIDI */
+	GPIO79_GPIO,				/* VA_SEL_BUL */
+	GPIO80_GPIO,				/* FLT_SEL_BUL */
+	GPIO78_GPIO,				/* MIDI_RESET */
+	GPIO33_GPIO,				/* MIDI_CS */
+	GPIO15_GPIO,				/* MIDI_IRQ */
+	GPIO49_GPIO,				/* MIDI_NPWE */
+	GPIO18_GPIO,				/* MIDI_RDY */
+
+	/* leds */
+	GPIO46_GPIO,
+	GPIO47_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+static unsigned long a1200_pin_config[] __initdata = {
+	/* keypad */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+static unsigned long a910_pin_config[] __initdata = {
+	/* keypad */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+
+	/* WLAN */
+	GPIO89_GPIO,				/* RESET */
+	GPIO33_GPIO,				/* WAKEUP */
+	GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+
+	/* MMC CS */
+	GPIO20_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+static unsigned long e2_pin_config[] __initdata = {
+	/* keypad */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+static unsigned long e6_pin_config[] __initdata = {
+	/* keypad */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+};
+#endif
+
+/* KEYPAD */
+#ifdef CONFIG_MACH_EZX_A780
+static const unsigned int a780_key_map[] = {
+	KEY(0, 0, KEY_SEND),
+	KEY(0, 1, KEY_BACK),
+	KEY(0, 2, KEY_END),
+	KEY(0, 3, KEY_PAGEUP),
+	KEY(0, 4, KEY_UP),
+
+	KEY(1, 0, KEY_NUMERIC_1),
+	KEY(1, 1, KEY_NUMERIC_2),
+	KEY(1, 2, KEY_NUMERIC_3),
+	KEY(1, 3, KEY_SELECT),
+	KEY(1, 4, KEY_KPENTER),
+
+	KEY(2, 0, KEY_NUMERIC_4),
+	KEY(2, 1, KEY_NUMERIC_5),
+	KEY(2, 2, KEY_NUMERIC_6),
+	KEY(2, 3, KEY_RECORD),
+	KEY(2, 4, KEY_LEFT),
+
+	KEY(3, 0, KEY_NUMERIC_7),
+	KEY(3, 1, KEY_NUMERIC_8),
+	KEY(3, 2, KEY_NUMERIC_9),
+	KEY(3, 3, KEY_HOME),
+	KEY(3, 4, KEY_RIGHT),
+
+	KEY(4, 0, KEY_NUMERIC_STAR),
+	KEY(4, 1, KEY_NUMERIC_0),
+	KEY(4, 2, KEY_NUMERIC_POUND),
+	KEY(4, 3, KEY_PAGEDOWN),
+	KEY(4, 4, KEY_DOWN),
+};
+
+static struct matrix_keymap_data a780_matrix_keymap_data = {
+	.keymap			= a780_key_map,
+	.keymap_size		= ARRAY_SIZE(a780_key_map),
+};
+
+static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
+	.matrix_key_rows = 5,
+	.matrix_key_cols = 5,
+	.matrix_keymap_data = &a780_matrix_keymap_data,
+
+	.direct_key_map = { KEY_CAMERA },
+	.direct_key_num = 1,
+
+	.debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_A780 */
+
+#ifdef CONFIG_MACH_EZX_E680
+static const unsigned int e680_key_map[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_RESERVED),
+	KEY(0, 3, KEY_SEND),
+
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_LEFT),
+	KEY(1, 2, KEY_PAGEUP),
+	KEY(1, 3, KEY_PAGEDOWN),
+
+	KEY(2, 0, KEY_RESERVED),
+	KEY(2, 1, KEY_RESERVED),
+	KEY(2, 2, KEY_RESERVED),
+	KEY(2, 3, KEY_KPENTER),
+};
+
+static struct matrix_keymap_data e680_matrix_keymap_data = {
+	.keymap			= e680_key_map,
+	.keymap_size		= ARRAY_SIZE(e680_key_map),
+};
+
+static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
+	.matrix_key_rows = 3,
+	.matrix_key_cols = 4,
+	.matrix_keymap_data = &e680_matrix_keymap_data,
+
+	.direct_key_map = {
+		KEY_CAMERA,
+		KEY_RESERVED,
+		KEY_RESERVED,
+		KEY_F1,
+		KEY_CANCEL,
+		KEY_F2,
+	},
+	.direct_key_num = 6,
+
+	.debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_E680 */
+
+#ifdef CONFIG_MACH_EZX_A1200
+static const unsigned int a1200_key_map[] = {
+	KEY(0, 0, KEY_RESERVED),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_PAGEDOWN),
+	KEY(0, 3, KEY_RESERVED),
+	KEY(0, 4, KEY_RESERVED),
+	KEY(0, 5, KEY_RESERVED),
+
+	KEY(1, 0, KEY_RESERVED),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_CAMERA),
+	KEY(1, 3, KEY_RESERVED),
+	KEY(1, 4, KEY_RESERVED),
+	KEY(1, 5, KEY_RESERVED),
+
+	KEY(2, 0, KEY_RESERVED),
+	KEY(2, 1, KEY_KPENTER),
+	KEY(2, 2, KEY_RECORD),
+	KEY(2, 3, KEY_RESERVED),
+	KEY(2, 4, KEY_RESERVED),
+	KEY(2, 5, KEY_SELECT),
+
+	KEY(3, 0, KEY_RESERVED),
+	KEY(3, 1, KEY_UP),
+	KEY(3, 2, KEY_SEND),
+	KEY(3, 3, KEY_RESERVED),
+	KEY(3, 4, KEY_RESERVED),
+	KEY(3, 5, KEY_RESERVED),
+
+	KEY(4, 0, KEY_RESERVED),
+	KEY(4, 1, KEY_LEFT),
+	KEY(4, 2, KEY_PAGEUP),
+	KEY(4, 3, KEY_RESERVED),
+	KEY(4, 4, KEY_RESERVED),
+	KEY(4, 5, KEY_RESERVED),
+};
+
+static struct matrix_keymap_data a1200_matrix_keymap_data = {
+	.keymap			= a1200_key_map,
+	.keymap_size		= ARRAY_SIZE(a1200_key_map),
+};
+
+static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
+	.matrix_key_rows = 5,
+	.matrix_key_cols = 6,
+	.matrix_keymap_data = &a1200_matrix_keymap_data,
+
+	.debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_A1200 */
+
+#ifdef CONFIG_MACH_EZX_E6
+static const unsigned int e6_key_map[] = {
+	KEY(0, 0, KEY_RESERVED),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_PAGEDOWN),
+	KEY(0, 3, KEY_RESERVED),
+	KEY(0, 4, KEY_RESERVED),
+	KEY(0, 5, KEY_NEXTSONG),
+
+	KEY(1, 0, KEY_RESERVED),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_PROG1),
+	KEY(1, 3, KEY_RESERVED),
+	KEY(1, 4, KEY_RESERVED),
+	KEY(1, 5, KEY_RESERVED),
+
+	KEY(2, 0, KEY_RESERVED),
+	KEY(2, 1, KEY_ENTER),
+	KEY(2, 2, KEY_CAMERA),
+	KEY(2, 3, KEY_RESERVED),
+	KEY(2, 4, KEY_RESERVED),
+	KEY(2, 5, KEY_WWW),
+
+	KEY(3, 0, KEY_RESERVED),
+	KEY(3, 1, KEY_UP),
+	KEY(3, 2, KEY_SEND),
+	KEY(3, 3, KEY_RESERVED),
+	KEY(3, 4, KEY_RESERVED),
+	KEY(3, 5, KEY_PLAYPAUSE),
+
+	KEY(4, 0, KEY_RESERVED),
+	KEY(4, 1, KEY_LEFT),
+	KEY(4, 2, KEY_PAGEUP),
+	KEY(4, 3, KEY_RESERVED),
+	KEY(4, 4, KEY_RESERVED),
+	KEY(4, 5, KEY_PREVIOUSSONG),
+};
+
+static struct matrix_keymap_data e6_keymap_data = {
+	.keymap			= e6_key_map,
+	.keymap_size		= ARRAY_SIZE(e6_key_map),
+};
+
+static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
+	.matrix_key_rows = 5,
+	.matrix_key_cols = 6,
+	.matrix_keymap_data = &e6_keymap_data,
+
+	.debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_E6 */
+
+#ifdef CONFIG_MACH_EZX_A910
+static const unsigned int a910_key_map[] = {
+	KEY(0, 0, KEY_NUMERIC_6),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_PAGEDOWN),
+	KEY(0, 3, KEY_KPENTER),
+	KEY(0, 4, KEY_NUMERIC_5),
+	KEY(0, 5, KEY_CAMERA),
+
+	KEY(1, 0, KEY_NUMERIC_8),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_RESERVED),
+	KEY(1, 3, KEY_F1), /* Left SoftKey */
+	KEY(1, 4, KEY_NUMERIC_STAR),
+	KEY(1, 5, KEY_RESERVED),
+
+	KEY(2, 0, KEY_NUMERIC_7),
+	KEY(2, 1, KEY_NUMERIC_9),
+	KEY(2, 2, KEY_RECORD),
+	KEY(2, 3, KEY_F2), /* Right SoftKey */
+	KEY(2, 4, KEY_BACK),
+	KEY(2, 5, KEY_SELECT),
+
+	KEY(3, 0, KEY_NUMERIC_2),
+	KEY(3, 1, KEY_UP),
+	KEY(3, 2, KEY_SEND),
+	KEY(3, 3, KEY_NUMERIC_0),
+	KEY(3, 4, KEY_NUMERIC_1),
+	KEY(3, 5, KEY_RECORD),
+
+	KEY(4, 0, KEY_NUMERIC_4),
+	KEY(4, 1, KEY_LEFT),
+	KEY(4, 2, KEY_PAGEUP),
+	KEY(4, 3, KEY_NUMERIC_POUND),
+	KEY(4, 4, KEY_NUMERIC_3),
+	KEY(4, 5, KEY_RESERVED),
+};
+
+static struct matrix_keymap_data a910_matrix_keymap_data = {
+	.keymap			= a910_key_map,
+	.keymap_size		= ARRAY_SIZE(a910_key_map),
+};
+
+static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
+	.matrix_key_rows = 5,
+	.matrix_key_cols = 6,
+	.matrix_keymap_data = &a910_matrix_keymap_data,
+
+	.debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_A910 */
+
+#ifdef CONFIG_MACH_EZX_E2
+static const unsigned int e2_key_map[] = {
+	KEY(0, 0, KEY_NUMERIC_6),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_NUMERIC_9),
+	KEY(0, 3, KEY_NEXTSONG),
+	KEY(0, 4, KEY_NUMERIC_5),
+	KEY(0, 5, KEY_F1), /* Left SoftKey */
+
+	KEY(1, 0, KEY_NUMERIC_8),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_RESERVED),
+	KEY(1, 3, KEY_PAGEUP),
+	KEY(1, 4, KEY_NUMERIC_STAR),
+	KEY(1, 5, KEY_F2), /* Right SoftKey */
+
+	KEY(2, 0, KEY_NUMERIC_7),
+	KEY(2, 1, KEY_KPENTER),
+	KEY(2, 2, KEY_RECORD),
+	KEY(2, 3, KEY_PAGEDOWN),
+	KEY(2, 4, KEY_BACK),
+	KEY(2, 5, KEY_NUMERIC_0),
+
+	KEY(3, 0, KEY_NUMERIC_2),
+	KEY(3, 1, KEY_UP),
+	KEY(3, 2, KEY_SEND),
+	KEY(3, 3, KEY_PLAYPAUSE),
+	KEY(3, 4, KEY_NUMERIC_1),
+	KEY(3, 5, KEY_SOUND), /* Music SoftKey */
+
+	KEY(4, 0, KEY_NUMERIC_4),
+	KEY(4, 1, KEY_LEFT),
+	KEY(4, 2, KEY_NUMERIC_POUND),
+	KEY(4, 3, KEY_PREVIOUSSONG),
+	KEY(4, 4, KEY_NUMERIC_3),
+	KEY(4, 5, KEY_RESERVED),
+};
+
+static struct matrix_keymap_data e2_matrix_keymap_data = {
+	.keymap			= e2_key_map,
+	.keymap_size		= ARRAY_SIZE(e2_key_map),
+};
+
+static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
+	.matrix_key_rows = 5,
+	.matrix_key_cols = 6,
+	.matrix_keymap_data = &e2_matrix_keymap_data,
+
+	.debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_E2 */
+
+#ifdef CONFIG_MACH_EZX_A780
+/* gpio_keys */
+static struct gpio_keys_button a780_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO12_A780_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A780 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
+	.buttons  = a780_buttons,
+	.nbuttons = ARRAY_SIZE(a780_buttons),
+};
+
+static struct platform_device a780_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a780_gpio_keys_platform_data,
+	},
+};
+
+/* camera */
+static int a780_camera_init(void)
+{
+	int err;
+
+	/*
+	 * GPIO50_nCAM_EN is active low
+	 * GPIO19_GEN1_CAM_RST is active on rising edge
+	 */
+	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+	if (err) {
+		pr_err("%s: Failed to request nCAM_EN\n", __func__);
+		goto fail;
+	}
+
+	err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
+	if (err) {
+		pr_err("%s: Failed to request CAM_RST\n", __func__);
+		goto fail_gpio_cam_rst;
+	}
+
+	gpio_direction_output(GPIO50_nCAM_EN, 1);
+	gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
+
+	return 0;
+
+fail_gpio_cam_rst:
+	gpio_free(GPIO50_nCAM_EN);
+fail:
+	return err;
+}
+
+static int a780_camera_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO50_nCAM_EN, !on);
+	return 0;
+}
+
+static int a780_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data a780_pxacamera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a780_camera_i2c_board_info = {
+	I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a780_iclink = {
+	.bus_id         = 0,
+	.flags          = SOCAM_SENSOR_INVERT_PCLK,
+	.i2c_adapter_id = 0,
+	.board_info     = &a780_camera_i2c_board_info,
+	.power          = a780_camera_power,
+	.reset          = a780_camera_reset,
+};
+
+static struct platform_device a780_camera = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &a780_iclink,
+	},
+};
+
+static struct platform_device *a780_devices[] __initdata = {
+	&a780_gpio_keys,
+};
+
+static void __init a780_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	pxa_set_i2c_info(NULL);
+
+	pxa_set_fb_info(NULL, &ezx_fb_info_1);
+
+	pxa_set_keypad_info(&a780_keypad_platform_data);
+
+	if (a780_camera_init() == 0) {
+		pxa_set_camera_info(&a780_pxacamera_platform_data);
+		platform_device_register(&a780_camera);
+	}
+
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
+}
+
+MACHINE_START(EZX_A780, "Motorola EZX A780")
+	.atag_offset    = 0x100,
+	.map_io         = pxa27x_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
+	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine   = a780_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+/* gpio_keys */
+static struct gpio_keys_button e680_buttons[] = {
+	[0] = {
+		.code       = KEY_SCREENLOCK,
+		.gpio       = GPIO12_E680_LOCK_SWITCH,
+		.active_low = 0,
+		.desc       = "E680 lock switch",
+		.type       = EV_KEY,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
+	.buttons  = e680_buttons,
+	.nbuttons = ARRAY_SIZE(e680_buttons),
+};
+
+static struct platform_device e680_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &e680_gpio_keys_platform_data,
+	},
+};
+
+static struct i2c_board_info __initdata e680_i2c_board_info[] = {
+	{ I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static struct platform_device *e680_devices[] __initdata = {
+	&e680_gpio_keys,
+};
+
+static void __init e680_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
+
+	pxa_set_fb_info(NULL, &ezx_fb_info_1);
+
+	pxa_set_keypad_info(&e680_keypad_platform_data);
+
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e680_devices));
+}
+
+MACHINE_START(EZX_E680, "Motorola EZX E680")
+	.atag_offset    = 0x100,
+	.map_io         = pxa27x_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
+	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine   = e680_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+/* gpio_keys */
+static struct gpio_keys_button a1200_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO15_A1200_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A1200 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
+	.buttons  = a1200_buttons,
+	.nbuttons = ARRAY_SIZE(a1200_buttons),
+};
+
+static struct platform_device a1200_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a1200_gpio_keys_platform_data,
+	},
+};
+
+static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
+	{ I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static struct platform_device *a1200_devices[] __initdata = {
+	&a1200_gpio_keys,
+};
+
+static void __init a1200_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
+
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
+
+	pxa_set_keypad_info(&a1200_keypad_platform_data);
+
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
+}
+
+MACHINE_START(EZX_A1200, "Motorola EZX A1200")
+	.atag_offset    = 0x100,
+	.map_io         = pxa27x_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
+	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine   = a1200_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+/* gpio_keys */
+static struct gpio_keys_button a910_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO15_A910_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A910 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
+	.buttons  = a910_buttons,
+	.nbuttons = ARRAY_SIZE(a910_buttons),
+};
+
+static struct platform_device a910_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a910_gpio_keys_platform_data,
+	},
+};
+
+/* camera */
+static int a910_camera_init(void)
+{
+	int err;
+
+	/*
+	 * GPIO50_nCAM_EN is active low
+	 * GPIO28_GEN2_CAM_RST is active on rising edge
+	 */
+	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+	if (err) {
+		pr_err("%s: Failed to request nCAM_EN\n", __func__);
+		goto fail;
+	}
+
+	err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
+	if (err) {
+		pr_err("%s: Failed to request CAM_RST\n", __func__);
+		goto fail_gpio_cam_rst;
+	}
+
+	gpio_direction_output(GPIO50_nCAM_EN, 1);
+	gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
+
+	return 0;
+
+fail_gpio_cam_rst:
+	gpio_free(GPIO50_nCAM_EN);
+fail:
+	return err;
+}
+
+static int a910_camera_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO50_nCAM_EN, !on);
+	return 0;
+}
+
+static int a910_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data a910_pxacamera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a910_camera_i2c_board_info = {
+	I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a910_iclink = {
+	.bus_id         = 0,
+	.i2c_adapter_id = 0,
+	.board_info     = &a910_camera_i2c_board_info,
+	.power          = a910_camera_power,
+	.reset          = a910_camera_reset,
+};
+
+static struct platform_device a910_camera = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &a910_iclink,
+	},
+};
+
+/* leds-lp3944 */
+static struct lp3944_platform_data a910_lp3944_leds = {
+	.leds_size = LP3944_LEDS_MAX,
+	.leds = {
+		[0] = {
+			.name = "a910:red:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[1] = {
+			.name = "a910:green:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[2] {
+			.name = "a910:blue:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		/* Leds 3 and 4 are used as display power switches */
+		[3] = {
+			.name = "a910::cli_display",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED_INVERTED
+		},
+		[4] = {
+			.name = "a910::main_display",
+			.status = LP3944_LED_STATUS_ON,
+			.type = LP3944_LED_TYPE_LED_INVERTED
+		},
+		[5] = { .type = LP3944_LED_TYPE_NONE },
+		[6] = {
+			.name = "a910::torch",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[7] = {
+			.name = "a910::flash",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED_INVERTED,
+		},
+	},
+};
+
+static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("lp3944", 0x60),
+		.platform_data = &a910_lp3944_leds,
+	},
+};
+
+static struct platform_device *a910_devices[] __initdata = {
+	&a910_gpio_keys,
+};
+
+static void __init a910_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
+
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
+
+	pxa_set_keypad_info(&a910_keypad_platform_data);
+
+	if (a910_camera_init() == 0) {
+		pxa_set_camera_info(&a910_pxacamera_platform_data);
+		platform_device_register(&a910_camera);
+	}
+
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
+}
+
+MACHINE_START(EZX_A910, "Motorola EZX A910")
+	.atag_offset    = 0x100,
+	.map_io         = pxa27x_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
+	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine   = a910_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+/* gpio_keys */
+static struct gpio_keys_button e6_buttons[] = {
+	[0] = {
+		.code       = KEY_SCREENLOCK,
+		.gpio       = GPIO15_E6_LOCK_SWITCH,
+		.active_low = 0,
+		.desc       = "E6 lock switch",
+		.type       = EV_KEY,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
+	.buttons  = e6_buttons,
+	.nbuttons = ARRAY_SIZE(e6_buttons),
+};
+
+static struct platform_device e6_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &e6_gpio_keys_platform_data,
+	},
+};
+
+static struct i2c_board_info __initdata e6_i2c_board_info[] = {
+	{ I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static struct platform_device *e6_devices[] __initdata = {
+	&e6_gpio_keys,
+};
+
+static void __init e6_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
+
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
+
+	pxa_set_keypad_info(&e6_keypad_platform_data);
+
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e6_devices));
+}
+
+MACHINE_START(EZX_E6, "Motorola EZX E6")
+	.atag_offset    = 0x100,
+	.map_io         = pxa27x_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
+	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine   = e6_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+static struct i2c_board_info __initdata e2_i2c_board_info[] = {
+	{ I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static struct platform_device *e2_devices[] __initdata = {
+};
+
+static void __init e2_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
+
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
+
+	pxa_set_keypad_info(&e2_keypad_platform_data);
+
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e2_devices));
+}
+
+MACHINE_START(EZX_E2, "Motorola EZX E2")
+	.atag_offset    = 0x100,
+	.map_io         = pxa27x_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
+	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine   = e2_init,
+	.restart	= pxa_restart,
+MACHINE_END
+#endif

arch/arm/mach-pxa/generic.c

@@ -0,0 +1,110 @@
+/*
+ *  linux/arch/arm/mach-pxa/generic.c
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * Code common to all PXA machines.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Since this file should be linked before any other machine specific file,
+ * the __initcall() here will be executed first.  This serves as default
+ * initialization stuff for PXA machines which can be overridden later if
+ * need be.
+ */
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/reset.h>
+#include <mach/smemc.h>
+#include <mach/pxa3xx-regs.h>
+
+#include "generic.h"
+#include <clocksource/pxa.h>
+
+void clear_reset_status(unsigned int mask)
+{
+	if (cpu_is_pxa2xx())
+		pxa2xx_clear_reset_status(mask);
+	else {
+		/* RESET_STATUS_* has a 1:1 mapping with ARSR */
+		ARSR = mask;
+	}
+}
+
+unsigned long get_clock_tick_rate(void)
+{
+	unsigned long clock_tick_rate;
+
+	if (cpu_is_pxa25x())
+		clock_tick_rate = 3686400;
+	else if (machine_is_mainstone())
+		clock_tick_rate = 3249600;
+	else
+		clock_tick_rate = 3250000;
+
+	return clock_tick_rate;
+}
+EXPORT_SYMBOL(get_clock_tick_rate);
+
+/*
+ * For non device-tree builds, keep legacy timer init
+ */
+void __init pxa_timer_init(void)
+{
+	if (cpu_is_pxa25x())
+		pxa25x_clocks_init();
+	if (cpu_is_pxa27x())
+		pxa27x_clocks_init();
+	if (cpu_is_pxa3xx())
+		pxa3xx_clocks_init();
+	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000),
+			    get_clock_tick_rate());
+}
+
+/*
+ * Get the clock frequency as reflected by CCCR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
+ */
+unsigned int get_clk_frequency_khz(int info)
+{
+	if (cpu_is_pxa25x())
+		return pxa25x_get_clk_frequency_khz(info);
+	else if (cpu_is_pxa27x())
+		return pxa27x_get_clk_frequency_khz(info);
+	return 0;
+}
+EXPORT_SYMBOL(get_clk_frequency_khz);
+
+/*
+ * Intel PXA2xx internal register mapping.
+ *
+ * Note: virtual 0xfffe0000-0xffffffff is reserved for the vector table
+ *       and cache flush area.
+ */
+static struct map_desc common_io_desc[] __initdata = {
+  	{	/* Devs */
+		.virtual	= (unsigned long)PERIPH_VIRT,
+		.pfn		= __phys_to_pfn(PERIPH_PHYS),
+		.length		= PERIPH_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+void __init pxa_map_io(void)
+{
+	debug_ll_io_init();
+	iotable_init(ARRAY_AND_SIZE(common_io_desc));
+}

arch/arm/mach-pxa/generic.h

@@ -0,0 +1,81 @@
+/*
+ *  linux/arch/arm/mach-pxa/generic.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/reboot.h>
+
+struct irq_data;
+
+extern unsigned int get_clk_frequency_khz(int info);
+extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *,
+					     unsigned int));
+extern void __init pxa_map_io(void);
+extern void pxa_timer_init(void);
+
+#define SET_BANK(__nr,__start,__size) \
+	mi->bank[__nr].start = (__start), \
+	mi->bank[__nr].size = (__size)
+
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+
+#define pxa25x_handle_irq icip_handle_irq
+extern int __init pxa25x_clocks_init(void);
+extern void __init pxa25x_init_irq(void);
+extern void __init pxa25x_map_io(void);
+extern void __init pxa26x_init_irq(void);
+
+#define pxa27x_handle_irq ichp_handle_irq
+extern int __init pxa27x_clocks_init(void);
+extern unsigned	pxa27x_get_clk_frequency_khz(int);
+extern void __init pxa27x_init_irq(void);
+extern void __init pxa27x_map_io(void);
+
+#define pxa3xx_handle_irq ichp_handle_irq
+extern int __init pxa3xx_clocks_init(void);
+extern void __init pxa3xx_init_irq(void);
+extern void __init pxa3xx_map_io(void);
+
+extern struct syscore_ops pxa_irq_syscore_ops;
+extern struct syscore_ops pxa2xx_mfp_syscore_ops;
+extern struct syscore_ops pxa3xx_mfp_syscore_ops;
+
+void __init pxa_set_ffuart_info(void *info);
+void __init pxa_set_btuart_info(void *info);
+void __init pxa_set_stuart_info(void *info);
+void __init pxa_set_hwuart_info(void *info);
+
+void pxa_restart(enum reboot_mode, const char *);
+
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+extern void pxa2xx_clear_reset_status(unsigned int);
+#else
+static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
+#endif
+
+/*
+ * Once fully converted to the clock framework, all these functions should be
+ * removed, and replaced with a clk_get(NULL, "core").
+ */
+#ifdef CONFIG_PXA25x
+extern unsigned pxa25x_get_clk_frequency_khz(int);
+#else
+#define pxa25x_get_clk_frequency_khz(x)		(0)
+#endif
+
+#ifdef CONFIG_PXA27x
+#else
+#define pxa27x_get_clk_frequency_khz(x)		(0)
+#endif
+
+#ifdef CONFIG_PXA3xx
+extern unsigned	pxa3xx_get_clk_frequency_khz(int);
+#else
+#define pxa3xx_get_clk_frequency_khz(x)		(0)
+#endif

arch/arm/mach-pxa/gumstix.c

@@ -0,0 +1,243 @@
+/*
+ *  linux/arch/arm/mach-pxa/gumstix.c
+ *
+ *  Support for the Gumstix motherboards.
+ *
+ *  Original Author:	Craig Hughes
+ *  Created:	Feb 14, 2008
+ *  Copyright:	Craig Hughes
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  Implemented based on lubbock.c by Nicolas Pitre and code from Craig
+ *  Hughes
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include "pxa25x.h"
+#include <linux/platform_data/mmc-pxamci.h>
+#include "udc.h"
+#include "gumstix.h"
+
+#include "generic.h"
+
+static struct resource flash_resource = {
+	.start	= 0x00000000,
+	.end	= SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct mtd_partition gumstix_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	} , {
+		.name =		"rootfs",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	MTDPART_OFS_APPEND
+	}
+};
+
+static struct flash_platform_data gumstix_flash_data = {
+	.map_name	= "cfi_probe",
+	.parts		= gumstix_partitions,
+	.nr_parts	= ARRAY_SIZE(gumstix_partitions),
+	.width		= 2,
+};
+
+static struct platform_device gumstix_flash_device = {
+	.name		= "pxa2xx-flash",
+	.id		= 0,
+	.dev = {
+		.platform_data = &gumstix_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&gumstix_flash_device,
+};
+
+#ifdef CONFIG_MMC_PXA
+static struct pxamci_platform_data gumstix_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect 	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+};
+
+static void __init gumstix_mmc_init(void)
+{
+	pxa_set_mci_info(&gumstix_mci_platform_data);
+}
+#else
+static void __init gumstix_mmc_init(void)
+{
+	pr_debug("Gumstix mmc disabled\n");
+}
+#endif
+
+#ifdef CONFIG_USB_PXA25X
+static struct gpio_vbus_mach_info gumstix_udc_info = {
+	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
+	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
+};
+
+static struct platform_device gumstix_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gumstix_udc_info,
+	},
+};
+
+static void __init gumstix_udc_init(void)
+{
+	platform_device_register(&gumstix_gpio_vbus);
+}
+#else
+static void gumstix_udc_init(void)
+{
+	pr_debug("Gumstix udc is disabled\n");
+}
+#endif
+
+#ifdef CONFIG_BT
+/* Normally, the bootloader would have enabled this 32kHz clock but many
+** boards still have u-boot 1.1.4 so we check if it has been turned on and
+** if not, we turn it on with a warning message. */
+static void gumstix_setup_bt_clock(void)
+{
+	int timeout = 500;
+
+	if (!(readl(OSCC) & OSCC_OOK))
+		pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");
+	else
+		return;
+
+	writel(readl(OSCC) | OSCC_OON, OSCC);
+	do {
+		if (readl(OSCC) & OSCC_OOK)
+			break;
+		udelay(1);
+	} while (--timeout);
+	if (!timeout)
+		pr_err("Failed to start 32kHz clock\n");
+}
+
+static void __init gumstix_bluetooth_init(void)
+{
+	int err;
+
+	gumstix_setup_bt_clock();
+
+	err = gpio_request(GPIO_GUMSTIX_BTRESET, "BTRST");
+	if (err) {
+		pr_err("gumstix: failed request gpio for bluetooth reset\n");
+		return;
+	}
+
+	err = gpio_direction_output(GPIO_GUMSTIX_BTRESET, 1);
+	if (err) {
+		pr_err("gumstix: can't reset bluetooth\n");
+		return;
+	}
+	gpio_set_value(GPIO_GUMSTIX_BTRESET, 0);
+	udelay(100);
+	gpio_set_value(GPIO_GUMSTIX_BTRESET, 1);
+}
+#else
+static void gumstix_bluetooth_init(void)
+{
+	pr_debug("Gumstix Bluetooth is disabled\n");
+}
+#endif
+
+static unsigned long gumstix_pin_config[] __initdata = {
+	GPIO12_32KHz,
+	/* BTUART */
+	GPIO42_HWUART_RXD,
+	GPIO43_HWUART_TXD,
+	GPIO44_HWUART_CTS,
+	GPIO45_HWUART_RTS,
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO53_MMC_CLK,
+	GPIO8_MMC_CS0,
+};
+
+int __attribute__((weak)) am200_init(void)
+{
+	return 0;
+}
+
+int __attribute__((weak)) am300_init(void)
+{
+	return 0;
+}
+
+static void __init carrier_board_init(void)
+{
+	/*
+	 * put carrier/expansion board init here if
+	 * they cannot be detected programatically
+	 */
+	am200_init();
+	am300_init();
+}
+
+static void __init gumstix_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	pxa_set_hwuart_info(NULL);
+
+	gumstix_bluetooth_init();
+	gumstix_udc_init();
+	gumstix_mmc_init();
+	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+	carrier_board_init();
+}
+
+MACHINE_START(GUMSTIX, "Gumstix")
+	.atag_offset	= 0x100, /* match u-boot bi_boot_params */
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine	= gumstix_init,
+	.restart	= pxa_restart,
+MACHINE_END

arch/arm/mach-pxa/gumstix.h

@@ -0,0 +1,92 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/gumstix.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+
+/* BTRESET - Reset line to Bluetooth module, active low signal. */
+#define GPIO_GUMSTIX_BTRESET          7
+#define GPIO_GUMSTIX_BTRESET_MD		(GPIO_GUMSTIX_BTRESET | GPIO_OUT)
+
+
+/*
+GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
+interrupt signal for determining cable presence. On the gumstix F,
+this moves to GPIO17 and GPIO37. */
+
+/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
+has detected a cable insertion; driven low otherwise. */
+
+#define GPIO_GUMSTIX_USB_GPIOn		35
+#define GPIO_GUMSTIX_USB_GPIOx		41
+
+/* usb state change */
+#define GUMSTIX_USB_INTR_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn)
+
+#define GPIO_GUMSTIX_USB_GPIOn_MD	(GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
+#define GPIO_GUMSTIX_USB_GPIOx_CON_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
+#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
+
+/*
+ * SD/MMC definitions
+ */
+#define GUMSTIX_GPIO_nSD_WP		22 /* SD Write Protect */
+#define GUMSTIX_GPIO_nSD_DETECT		11 /* MMC/SD Card Detect */
+#define GUMSTIX_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT)
+
+/*
+ * SMC Ethernet definitions
+ * ETH_RST provides a hardware reset line to the ethernet chip
+ * ETH is the IRQ line in from the ethernet chip to the PXA
+ */
+#define GPIO_GUMSTIX_ETH0_RST		80
+#define GPIO_GUMSTIX_ETH0_RST_MD	(GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
+#define GPIO_GUMSTIX_ETH1_RST		52
+#define GPIO_GUMSTIX_ETH1_RST_MD	(GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
+
+#define GPIO_GUMSTIX_ETH0		36
+#define GPIO_GUMSTIX_ETH0_MD		(GPIO_GUMSTIX_ETH0 | GPIO_IN)
+#define GUMSTIX_ETH0_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0)
+#define GPIO_GUMSTIX_ETH1		27
+#define GPIO_GUMSTIX_ETH1_MD		(GPIO_GUMSTIX_ETH1 | GPIO_IN)
+#define GUMSTIX_ETH1_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1)
+
+
+/* CF reset line */
+#define GPIO8_RESET			8
+
+/* CF slot 0 */
+#define GPIO4_nBVD1			4
+#define GPIO4_nSTSCHG			GPIO4_nBVD1
+#define GPIO11_nCD			11
+#define GPIO26_PRDY_nBSY		26
+#define GUMSTIX_S0_nSTSCHG_IRQ		PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG)
+#define GUMSTIX_S0_nCD_IRQ		PXA_GPIO_TO_IRQ(GPIO11_nCD)
+#define GUMSTIX_S0_PRDY_nBSY_IRQ	PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY)
+
+/* CF slot 1 */
+#define GPIO18_nBVD1			18
+#define GPIO18_nSTSCHG			GPIO18_nBVD1
+#define GPIO36_nCD			36
+#define GPIO27_PRDY_nBSY		27
+#define GUMSTIX_S1_nSTSCHG_IRQ		PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG)
+#define GUMSTIX_S1_nCD_IRQ		PXA_GPIO_TO_IRQ(GPIO36_nCD)
+#define GUMSTIX_S1_PRDY_nBSY_IRQ	PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY)
+
+/* CF GPIO line modes */
+#define GPIO4_nSTSCHG_MD		(GPIO4_nSTSCHG | GPIO_IN)
+#define GPIO8_RESET_MD			(GPIO8_RESET | GPIO_OUT)
+#define GPIO11_nCD_MD			(GPIO11_nCD | GPIO_IN)
+#define GPIO18_nSTSCHG_MD		(GPIO18_nSTSCHG | GPIO_IN)
+#define GPIO26_PRDY_nBSY_MD		(GPIO26_PRDY_nBSY | GPIO_IN)
+#define GPIO27_PRDY_nBSY_MD		(GPIO27_PRDY_nBSY | GPIO_IN)
+#define GPIO36_nCD_MD			(GPIO36_nCD | GPIO_IN)
+
+/* for expansion boards that can't be programatically detected */
+extern int am200_init(void);
+extern int am300_init(void);
+

arch/arm/mach-pxa/h5000.c

@@ -0,0 +1,214 @@
+/*
+ * Hardware definitions for HP iPAQ h5xxx Handheld Computers
+ *
+ * Copyright 2000-2003  Hewlett-Packard Company.
+ * Copyright 2002       Jamey Hicks <jamey.hicks@hp.com>
+ * Copyright 2004-2005  Phil Blundell <pb@handhelds.org>
+ * Copyright 2007-2008  Anton Vorontsov <cbouatmailru@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/irq.h>
+
+#include "pxa25x.h"
+#include "h5000.h"
+#include "udc.h"
+#include <mach/smemc.h>
+
+#include "generic.h"
+
+/*
+ * Flash
+ */
+
+static struct mtd_partition h5000_flash0_partitions[] = {
+	{
+		.name = "bootldr",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	{
+		.name = "root",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	},
+};
+
+static struct mtd_partition h5000_flash1_partitions[] = {
+	{
+		.name = "second root",
+		.size = SZ_16M - 0x00040000,
+		.offset = 0,
+	},
+	{
+		.name = "asset",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+		.mask_flags = MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data h5000_flash0_data = {
+	.width = 4,
+	.parts = h5000_flash0_partitions,
+	.nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
+};
+
+static struct physmap_flash_data h5000_flash1_data = {
+	.width = 4,
+	.parts = h5000_flash1_partitions,
+	.nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
+};
+
+static struct resource h5000_flash0_resources = {
+	.start = PXA_CS0_PHYS,
+	.end = PXA_CS0_PHYS + SZ_32M - 1,
+	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct resource h5000_flash1_resources = {
+	.start = PXA_CS0_PHYS + SZ_32M,
+	.end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
+	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct platform_device h5000_flash[] = {
+	{
+		.name = "physmap-flash",
+		.id = 0,
+		.resource = &h5000_flash0_resources,
+		.num_resources = 1,
+		.dev = {
+			.platform_data = &h5000_flash0_data,
+		},
+	},
+	{
+		.name = "physmap-flash",
+		.id = 1,
+		.resource = &h5000_flash1_resources,
+		.num_resources = 1,
+		.dev = {
+			.platform_data = &h5000_flash1_data,
+		},
+	},
+};
+
+/*
+ * USB Device Controller
+ */
+
+static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
+	.gpio_pullup = H5000_GPIO_USB_PULLUP,
+};
+
+/*
+ * GPIO setup
+ */
+
+static unsigned long h5000_pin_config[] __initdata = {
+	/* Crystal and Clock Signals */
+	GPIO12_32KHz,
+
+	/* SDRAM and Static Memory I/O Signals */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+
+	/* FFUART */
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO36_FFUART_DCD,
+	GPIO37_FFUART_DSR,
+	GPIO38_FFUART_RI,
+	GPIO39_FFUART_TXD,
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
+};
+
+/*
+ * Localbus setup:
+ * CS0: Flash;
+ * CS1: MediaQ chip, select 16-bit bus and vlio;
+ * CS5: SAMCOP.
+ */
+
+static void fix_msc(void)
+{
+	__raw_writel(0x129c24f2, MSC0);
+	__raw_writel(0x7ff424fa, MSC1);
+	__raw_writel(0x7ff47ff4, MSC2);
+
+	__raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
+}
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+	&h5000_flash[0],
+	&h5000_flash[1],
+};
+
+static void __init h5000_init(void)
+{
+	fix_msc();
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	pxa_set_udc_info(&h5000_udc_mach_info);
+	platform_add_devices(ARRAY_AND_SIZE(devices));
+}
+
+MACHINE_START(H5400, "HP iPAQ H5000")
+	.atag_offset = 0x100,
+	.map_io = pxa25x_map_io,
+	.nr_irqs = PXA_NR_IRQS,
+	.init_irq = pxa25x_init_irq,
+	.handle_irq = pxa25x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine = h5000_init,
+	.restart	= pxa_restart,
+MACHINE_END

arch/arm/mach-pxa/h5000.h

@@ -0,0 +1,113 @@
+/*
+ * Hardware definitions for HP iPAQ h5xxx Handheld Computers
+ *
+ * Copyright(20)02 Hewlett-Packard Company.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks
+ */
+
+#ifndef __ASM_ARCH_H5000_H
+#define __ASM_ARCH_H5000_H
+
+#include "mfp-pxa25x.h"
+
+/*
+ * CPU GPIOs
+ */
+
+#define H5000_GPIO_POWER_BUTTON   (0)
+#define H5000_GPIO_RESET_BUTTON_N (1)
+#define H5000_GPIO_OPT_INT        (2)
+#define H5000_GPIO_BACKUP_POWER   (3)
+#define H5000_GPIO_ACTION_BUTTON  (4)
+#define H5000_GPIO_COM_DCD_SOMETHING  (5) /* what is this really ? */
+/* 6 not connected */
+#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
+/* 8 not connected */
+#define H5000_GPIO_RSO_N          (9)       /* reset output from max1702 which regulates 3.3 and 2.5 */
+#define H5000_GPIO_ASIC_INT_N   (10)       /* from companion asic */
+#define H5000_GPIO_BT_ENV_0     (11)       /* to LMX9814, set to 1 according to regdump */
+/*(12) not connected */
+#define H5000_GPIO_BT_ENV_1     (13)       /* to LMX9814, set to 1 according to regdump */
+#define H5000_GPIO_BT_WU        (14)       /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
+/*(15) is CS1# */
+/*(16) not connected */
+/*(17) not connected */
+/*(18) is pcmcia ready */
+/*(19) is dreq1 */
+/*(20) is dreq0 */
+#define H5000_GPIO_OE_RD_NWR	(21)       /* output enable on rd/nwr signal to companion asic */
+/*(22) is not connected */
+#define H5000_GPIO_OPT_SPI_CLK  (23)       /* to extension pack */
+#define H5000_GPIO_OPT_SPI_CS_N (24)       /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DOUT (25)       /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DIN  (26)       /* to extension pack */
+/*(27) not connected */
+#define H5000_GPIO_I2S_BITCLK   (28)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAOUT  (29)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAIN   (30)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_LRCLK    (31)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_SYSCLK   (32)       /* connected to AC97 codec */
+/*(33) is CS5# */
+#define H5000_GPIO_COM_RXD      (34)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_CTS      (35)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DCD      (36)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DSR      (37)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RI       (38)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_TXD      (39)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DTR      (40)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RTS      (41)       /* connected to cradle/cable connector */
+
+#define H5000_GPIO_BT_RXD       (42)       /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_TXD       (43)       /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_CTS       (44)       /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_RTS       (45)       /* connected to BT (LMX9814) */
+
+#define H5000_GPIO_IRDA_RXD     (46)
+#define H5000_GPIO_IRDA_TXD     (47)
+
+#define H5000_GPIO_POE_N        (48)       /* used for pcmcia */
+#define H5000_GPIO_PWE_N        (49)       /* used for pcmcia */
+#define H5000_GPIO_PIOR_N       (50)       /* used for pcmcia */
+#define H5000_GPIO_PIOW_N       (51)       /* used for pcmcia */
+#define H5000_GPIO_PCE1_N       (52)       /* used for pcmcia */
+#define H5000_GPIO_PCE2_N       (53)       /* used for pcmcia */
+#define H5000_GPIO_PSKTSEL      (54)       /* used for pcmcia */
+#define H5000_GPIO_PREG_N       (55)       /* used for pcmcia */
+#define H5000_GPIO_PWAIT_N      (56)       /* used for pcmcia */
+#define H5000_GPIO_IOIS16_N     (57)       /* used for pcmcia */
+
+#define H5000_GPIO_IRDA_SD      (58)       /* to hsdl3002 sd */
+/*(59) not connected */
+#define H5000_GPIO_POWER_SD_N   (60)       /* controls power to SD */
+#define H5000_GPIO_POWER_RS232_N	(61)       /* inverted FORCEON to rs232 transceiver */
+#define H5000_GPIO_POWER_ACCEL_N	(62)       /* controls power to accel */
+/*(63) is not connected */
+#define H5000_GPIO_OPT_NVRAM    (64)       /* controls power to expansion pack */
+#define H5000_GPIO_CHG_EN       (65)       /* to sc801 en */
+#define H5000_GPIO_USB_PULLUP   (66)       /* USB d+ pullup via 1.5K resistor */
+#define H5000_GPIO_BT_2V8_N     (67)       /* 2.8V used by bluetooth */
+#define H5000_GPIO_EXT_CHG_RATE (68)       /* enables external charging rate */
+/*(69) is not connected */
+#define H5000_GPIO_CIR_RESET    (70)       /* consumer IR reset */
+#define H5000_GPIO_POWER_LIGHT_SENSOR_N	(71)
+#define H5000_GPIO_BT_M_RESET   (72)
+#define H5000_GPIO_STD_CHG_RATE (73)
+#define H5000_GPIO_SD_WP_N      (74)
+#define H5000_GPIO_MOTOR_ON_N   (75)       /* external pullup on this */
+#define H5000_GPIO_HEADPHONE_DETECT	(76)
+#define H5000_GPIO_USB_CHG_RATE (77)       /* select rate for charging via usb */
+/*(78) is CS2# */
+/*(79) is CS3# */
+/*(80) is CS4# */
+
+#endif /* __ASM_ARCH_H5000_H */

arch/arm/mach-pxa/himalaya.c

@@ -0,0 +1,169 @@
+/*
+ * linux/arch/arm/mach-pxa/himalaya.c
+ *
+ * Hardware definitions for the HTC Himalaya
+ *
+ * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c
+ *
+ * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "pxa25x.h"
+
+#include "generic.h"
+
+/* ---------------------- Himalaya LCD definitions -------------------- */
+
+static struct w100_gen_regs himalaya_lcd_regs = {
+	.lcd_format =        0x00000003,
+	.lcdd_cntl1 =        0x00000000,
+	.lcdd_cntl2 =        0x0003ffff,
+	.genlcd_cntl1 =      0x00fff003,
+	.genlcd_cntl2 =      0x00000003,
+	.genlcd_cntl3 =      0x000102aa,
+};
+
+static struct w100_mode himalaya4_lcd_mode = {
+	.xres 		= 240,
+	.yres 		= 320,
+	.left_margin 	= 0,
+	.right_margin 	= 31,
+	.upper_margin 	= 15,
+	.lower_margin 	= 0,
+	.crtc_ss	= 0x80150014,
+	.crtc_ls	= 0xa0fb00f7,
+	.crtc_gs	= 0xc0080007,
+	.crtc_vpos_gs	= 0x00080007,
+	.crtc_rev	= 0x0000000a,
+	.crtc_dclk	= 0x81700030,
+	.crtc_gclk	= 0x8015010f,
+	.crtc_goe	= 0x00000000,
+	.pll_freq 	= 80,
+	.pixclk_divider = 15,
+	.pixclk_divider_rotated = 15,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 0,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_mode himalaya6_lcd_mode = {
+	.xres 		= 240,
+	.yres 		= 320,
+	.left_margin 	= 9,
+	.right_margin 	= 8,
+	.upper_margin 	= 5,
+	.lower_margin 	= 4,
+	.crtc_ss	= 0x80150014,
+	.crtc_ls	= 0xa0fb00f7,
+	.crtc_gs	= 0xc0080007,
+	.crtc_vpos_gs	= 0x00080007,
+	.crtc_rev	= 0x0000000a,
+	.crtc_dclk	= 0xa1700030,
+	.crtc_gclk	= 0x8015010f,
+	.crtc_goe	= 0x00000000,
+	.pll_freq 	= 95,
+	.pixclk_divider = 0xb,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs himalaya_w100_gpio_info = {
+	.init_data1 = 0xffff0000,	/* GPIO_DATA  */
+	.gpio_dir1  = 0x00000000,	/* GPIO_CNTL1 */
+	.gpio_oe1   = 0x003c0000,	/* GPIO_CNTL2 */
+	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
+	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
+	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info himalaya_fb_info = {
+	.num_modes  = 1,
+	.regs       = &himalaya_lcd_regs,
+	.gpio       = &himalaya_w100_gpio_info,
+	.xtal_freq = 16000000,
+};
+
+static struct resource himalaya_fb_resources[] = {
+	[0] = {
+		.start	= 0x08000000,
+		.end	= 0x08ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device himalaya_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &himalaya_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(himalaya_fb_resources),
+	.resource       = himalaya_fb_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&himalaya_fb_device,
+};
+
+static void __init himalaya_lcd_init(void)
+{
+	int himalaya_boardid;
+
+	himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */
+	printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n",
+		himalaya_boardid);
+
+	switch (himalaya_boardid) {
+	case 0x4:
+		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+	break;
+	case 0x6:
+		himalaya_fb_info.modelist = &himalaya6_lcd_mode;
+	break;
+	default:
+		printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n",
+			himalaya_boardid);
+		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+	}
+}
+
+static void __init himalaya_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	himalaya_lcd_init();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+
+MACHINE_START(HIMALAYA, "HTC Himalaya")
+	.atag_offset = 0x100,
+	.map_io = pxa25x_map_io,
+	.nr_irqs = PXA_NR_IRQS,
+	.init_irq = pxa25x_init_irq,
+	.handle_irq = pxa25x_handle_irq,
+	.init_machine = himalaya_init,
+	.init_time	= pxa_timer_init,
+	.restart	= pxa_restart,
+MACHINE_END

arch/arm/mach-pxa/idp.c

@@ -0,0 +1,292 @@
+/*
+ *  linux/arch/arm/mach-pxa/idp.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
+ *
+ *  2001-09-13: Cliff Brake <cbrake@accelent.com>
+ *              Initial code
+ *
+ *  2005-02-15: Cliff Brake <cliff.brake@gmail.com>
+ *  		<http://www.vibren.com> <http://bec-systems.com>
+ *              Updated for 2.6 kernel
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "pxa25x.h"
+#include "idp.h"
+#include <linux/platform_data/video-pxafb.h>
+#include <mach/bitfield.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/smc91x.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/* TODO:
+ * - add pxa2xx_audio_ops_t device structure
+ * - Ethernet interrupt
+ */
+
+static unsigned long idp_pin_config[] __initdata = {
+	/* LCD */
+	GPIOxx_LCD_DSTN_16BPP,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* Ethernet */
+	GPIO33_nCS_5,	/* Ethernet CS */
+	GPIO4_GPIO,	/* Ethernet IRQ */
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (IDP_ETH_PHYS + 0x300),
+		.end	= (IDP_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_GPIO_TO_IRQ(4),
+		.end	= PXA_GPIO_TO_IRQ(4),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		 SMC91X_USE_DMA | SMC91X_NOWAIT,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
+};
+
+static void idp_backlight_power(int on)
+{
+	if (on) {
+		IDP_CPLD_LCD |= (1<<1);
+	} else {
+		IDP_CPLD_LCD &= ~(1<<1);
+	}
+}
+
+static void idp_vlcd(int on)
+{
+	if (on) {
+		IDP_CPLD_LCD |= (1<<2);
+	} else {
+		IDP_CPLD_LCD &= ~(1<<2);
+	}
+}
+
+static void idp_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+	if (on) {
+		IDP_CPLD_LCD |= (1<<0);
+	} else {
+		IDP_CPLD_LCD &= ~(1<<0);
+	}
+
+	/* call idp_vlcd for now as core driver does not support
+	 * both power and vlcd hooks.  Note, this is not technically
+	 * the correct sequence, but seems to work.  Disclaimer:
+	 * this may eventually damage the display.
+	 */
+
+	idp_vlcd(on);
+}
+
+static struct pxafb_mode_info sharp_lm8v31_mode = {
+	.pixclock	= 270000,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 16,
+	.hsync_len	= 1,
+	.left_margin	= 3,
+	.right_margin	= 3,
+	.vsync_len	= 1,
+	.upper_margin	= 0,
+	.lower_margin	= 0,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.cmap_greyscale	= 0,
+};
+
+static struct pxafb_mach_info sharp_lm8v31 = {
+	.modes          = &sharp_lm8v31_mode,
+	.num_modes      = 1,
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
+			  LCD_AC_BIAS_FREQ(255),
+	.pxafb_backlight_power = &idp_backlight_power,
+	.pxafb_lcd_power = &idp_lcd_power
+};
+
+static struct pxamci_platform_data idp_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+};
+
+static void __init idp_init(void)
+{
+	printk("idp_init()\n");
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	platform_device_register(&smc91x_device);
+	//platform_device_register(&mst_audio_device);
+	pxa_set_fb_info(NULL, &sharp_lm8v31);
+	pxa_set_mci_info(&idp_mci_platform_data);
+}
+
+static struct map_desc idp_io_desc[] __initdata = {
+  	{
+		.virtual	=  IDP_COREVOLT_VIRT,
+		.pfn		= __phys_to_pfn(IDP_COREVOLT_PHYS),
+		.length		= IDP_COREVOLT_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  IDP_CPLD_VIRT,
+		.pfn		= __phys_to_pfn(IDP_CPLD_PHYS),
+		.length		= IDP_CPLD_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init idp_map_io(void)
+{
+	pxa25x_map_io();
+	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
+}
+
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct idp_led {
+	struct led_classdev     cdev;
+	u8                      mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} idp_leds[] = {
+	{ "idp:green", "heartbeat", },
+	{ "idp:red", "cpu0", },
+};
+
+static void idp_led_set(struct led_classdev *cdev,
+		enum led_brightness b)
+{
+	struct idp_led *led = container_of(cdev,
+			struct idp_led, cdev);
+	u32 reg = IDP_CPLD_LED_CONTROL;
+
+	if (b != LED_OFF)
+		reg &= ~led->mask;
+	else
+		reg |= led->mask;
+
+	IDP_CPLD_LED_CONTROL = reg;
+}
+
+static enum led_brightness idp_led_get(struct led_classdev *cdev)
+{
+	struct idp_led *led = container_of(cdev,
+			struct idp_led, cdev);
+
+	return (IDP_CPLD_LED_CONTROL & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init idp_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_pxa_idp())
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(idp_leds); i++) {
+		struct idp_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = idp_leds[i].name;
+		led->cdev.brightness_set = idp_led_set;
+		led->cdev.brightness_get = idp_led_get;
+		led->cdev.default_trigger = idp_leds[i].trigger;
+
+		if (i == 0)
+			led->mask = IDP_HB_LED;
+		else
+			led->mask = IDP_BUSY_LED;
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(idp_leds_init);
+#endif
+
+MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
+	/* Maintainer: Vibren Technologies */
+	.map_io		= idp_map_io,
+	.nr_irqs	= PXA_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine	= idp_init,
+	.restart	= pxa_restart,
+MACHINE_END

arch/arm/mach-pxa/idp.h

@@ -0,0 +1,198 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/idp.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
+ *
+ * 2001-09-13: Cliff Brake <cbrake@accelent.com>
+ *             Initial code
+ *
+ * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
+ *             <http://www.vibren.com> <http://bec-systems.com>
+ *             Changes for 2.6 kernel.
+ */
+
+
+/*
+ * Note: this file must be safe to include in assembly files
+ *
+ * Support for the Vibren PXA255 IDP requires rev04 or later
+ * IDP hardware.
+ */
+
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+
+#define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
+#define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
+#define IDP_MEDIAQ_PHYS		(PXA_CS3_PHYS)
+#define IDP_IDE_PHYS		(PXA_CS5_PHYS + 0x03000000)
+#define IDP_ETH_PHYS		(PXA_CS5_PHYS + 0x03400000)
+#define IDP_COREVOLT_PHYS	(PXA_CS5_PHYS + 0x03800000)
+#define IDP_CPLD_PHYS		(PXA_CS5_PHYS + 0x03C00000)
+
+
+/*
+ * virtual memory map
+ */
+
+#define IDP_COREVOLT_VIRT	(0xf0000000)
+#define IDP_COREVOLT_SIZE	(1*1024*1024)
+
+#define IDP_CPLD_VIRT		(IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
+#define IDP_CPLD_SIZE		(1*1024*1024)
+
+#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
+#error Your custom IO space is getting a bit large !!
+#endif
+
+#define CPLD_P2V(x)		((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
+#define CPLD_V2P(x)		((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __CPLD_REG(x)		(*((volatile unsigned long *)CPLD_P2V(x)))
+#else
+#  define __CPLD_REG(x)		CPLD_P2V(x)
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
+
+#define _IDP_CPLD_REV			(IDP_CPLD_PHYS + 0x00)
+#define _IDP_CPLD_PERIPH_PWR		(IDP_CPLD_PHYS + 0x04)
+#define _IDP_CPLD_LED_CONTROL		(IDP_CPLD_PHYS + 0x08)
+#define _IDP_CPLD_KB_COL_HIGH		(IDP_CPLD_PHYS + 0x0C)
+#define _IDP_CPLD_KB_COL_LOW		(IDP_CPLD_PHYS + 0x10)
+#define _IDP_CPLD_PCCARD_EN		(IDP_CPLD_PHYS + 0x14)
+#define _IDP_CPLD_GPIOH_DIR		(IDP_CPLD_PHYS + 0x18)
+#define _IDP_CPLD_GPIOH_VALUE		(IDP_CPLD_PHYS + 0x1C)
+#define _IDP_CPLD_GPIOL_DIR		(IDP_CPLD_PHYS + 0x20)
+#define _IDP_CPLD_GPIOL_VALUE		(IDP_CPLD_PHYS + 0x24)
+#define _IDP_CPLD_PCCARD_PWR		(IDP_CPLD_PHYS + 0x28)
+#define _IDP_CPLD_MISC_CTRL		(IDP_CPLD_PHYS + 0x2C)
+#define _IDP_CPLD_LCD			(IDP_CPLD_PHYS + 0x30)
+#define _IDP_CPLD_FLASH_WE		(IDP_CPLD_PHYS + 0x34)
+
+#define _IDP_CPLD_KB_ROW		(IDP_CPLD_PHYS + 0x50)
+#define _IDP_CPLD_PCCARD0_STATUS	(IDP_CPLD_PHYS + 0x54)
+#define _IDP_CPLD_PCCARD1_STATUS	(IDP_CPLD_PHYS + 0x58)
+#define _IDP_CPLD_MISC_STATUS		(IDP_CPLD_PHYS + 0x5C)
+
+/* FPGA register virtual addresses */
+
+#define IDP_CPLD_REV			__CPLD_REG(_IDP_CPLD_REV)
+#define IDP_CPLD_PERIPH_PWR		__CPLD_REG(_IDP_CPLD_PERIPH_PWR)
+#define IDP_CPLD_LED_CONTROL		__CPLD_REG(_IDP_CPLD_LED_CONTROL)
+#define IDP_CPLD_KB_COL_HIGH		__CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
+#define IDP_CPLD_KB_COL_LOW		__CPLD_REG(_IDP_CPLD_KB_COL_LOW)
+#define IDP_CPLD_PCCARD_EN		__CPLD_REG(_IDP_CPLD_PCCARD_EN)
+#define IDP_CPLD_GPIOH_DIR		__CPLD_REG(_IDP_CPLD_GPIOH_DIR)
+#define IDP_CPLD_GPIOH_VALUE		__CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
+#define IDP_CPLD_GPIOL_DIR		__CPLD_REG(_IDP_CPLD_GPIOL_DIR)
+#define IDP_CPLD_GPIOL_VALUE		__CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
+#define IDP_CPLD_PCCARD_PWR		__CPLD_REG(_IDP_CPLD_PCCARD_PWR)
+#define IDP_CPLD_MISC_CTRL		__CPLD_REG(_IDP_CPLD_MISC_CTRL)
+#define IDP_CPLD_LCD			__CPLD_REG(_IDP_CPLD_LCD)
+#define IDP_CPLD_FLASH_WE		__CPLD_REG(_IDP_CPLD_FLASH_WE)
+
+#define IDP_CPLD_KB_ROW		        __CPLD_REG(_IDP_CPLD_KB_ROW)
+#define IDP_CPLD_PCCARD0_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
+#define IDP_CPLD_PCCARD1_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
+#define IDP_CPLD_MISC_STATUS		__CPLD_REG(_IDP_CPLD_MISC_STATUS)
+
+
+/*
+ * Bit masks for various registers
+ */
+
+// IDP_CPLD_PCCARD_PWR
+#define PCC0_PWR0	(1 << 0)
+#define PCC0_PWR1	(1 << 1)
+#define PCC0_PWR2	(1 << 2)
+#define PCC0_PWR3	(1 << 3)
+#define PCC1_PWR0	(1 << 4)
+#define PCC1_PWR1	(1 << 5)
+#define PCC1_PWR2	(1 << 6)
+#define PCC1_PWR3	(1 << 7)
+
+// IDP_CPLD_PCCARD_EN
+#define PCC0_RESET	(1 << 6)
+#define PCC1_RESET	(1 << 7)
+#define PCC0_ENABLE	(1 << 0)
+#define PCC1_ENABLE	(1 << 1)
+
+// IDP_CPLD_PCCARDx_STATUS
+#define _PCC_WRPROT	(1 << 7) // 7-4 read as low true
+#define _PCC_RESET	(1 << 6)
+#define _PCC_IRQ	(1 << 5)
+#define _PCC_INPACK	(1 << 4)
+#define PCC_BVD2	(1 << 3)
+#define PCC_BVD1	(1 << 2)
+#define PCC_VS2		(1 << 1)
+#define PCC_VS1		(1 << 0)
+
+/* A listing of interrupts used by external hardware devices */
+
+#define TOUCH_PANEL_IRQ			PXA_GPIO_TO_IRQ(5)
+#define IDE_IRQ				PXA_GPIO_TO_IRQ(21)
+
+#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
+
+#define ETHERNET_IRQ			PXA_GPIO_TO_IRQ(4)
+#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
+
+#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
+
+#define PCMCIA_S0_CD_VALID		PXA_GPIO_TO_IRQ(7)
+#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S1_CD_VALID		PXA_GPIO_TO_IRQ(8)
+#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S0_RDYINT		PXA_GPIO_TO_IRQ(19)
+#define PCMCIA_S1_RDYINT		PXA_GPIO_TO_IRQ(22)
+
+
+/*
+ * Macros for LED Driver
+ */
+
+/* leds 0 = ON */
+#define IDP_HB_LED	(1<<5)
+#define IDP_BUSY_LED	(1<<6)
+
+#define IDP_LEDS_MASK	(IDP_HB_LED | IDP_BUSY_LED)
+
+/*
+ * macros for MTD driver
+ */
+
+#define FLASH_WRITE_PROTECT_DISABLE()	((IDP_CPLD_FLASH_WE) &= ~(0x1))
+#define FLASH_WRITE_PROTECT_ENABLE()	((IDP_CPLD_FLASH_WE) |= (0x1))
+
+/*
+ * macros for matrix keyboard driver
+ */
+
+#define KEYBD_MATRIX_NUMBER_INPUTS	7
+#define KEYBD_MATRIX_NUMBER_OUTPUTS	14
+
+#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
+#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
+
+#define KEYBD_MATRIX_SETTLING_TIME_US			100
+#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
+
+#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
+{\
+	IDP_CPLD_KB_COL_LOW = outputs;\
+	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
+}
+
+#define KEYBD_MATRIX_GET_INPUTS(inputs) \
+{\
+	inputs = (IDP_CPLD_KB_ROW & 0x7f);\
+}
+
+

arch/arm/mach-pxa/include/mach/dma.h

@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/dma.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <mach/hardware.h>
+
+/* DMA Controller Registers Definitions */
+#define DMAC_REGS_VIRT	io_p2v(0x40000000)
+
+#endif /* _ASM_ARCH_DMA_H */

arch/arm/mach-pxa/include/mach/smemc.h

@@ -0,0 +1,75 @@
+/*
+ * Static memory controller register definitions for PXA CPUs
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SMEMC_REGS_H
+#define __SMEMC_REGS_H
+
+#define PXA2XX_SMEMC_BASE	0x48000000
+#define PXA3XX_SMEMC_BASE	0x4a000000
+#define SMEMC_VIRT		IOMEM(0xf6000000)
+
+#define MDCNFG		(SMEMC_VIRT + 0x00)  /* SDRAM Configuration Register 0 */
+#define MDREFR		(SMEMC_VIRT + 0x04)  /* SDRAM Refresh Control Register */
+#define MSC0		(SMEMC_VIRT + 0x08)  /* Static Memory Control Register 0 */
+#define MSC1		(SMEMC_VIRT + 0x0C)  /* Static Memory Control Register 1 */
+#define MSC2		(SMEMC_VIRT + 0x10)  /* Static Memory Control Register 2 */
+#define MECR		(SMEMC_VIRT + 0x14)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR		(SMEMC_VIRT + 0x18)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG		(SMEMC_VIRT + 0x1C)  /* Synchronous Static Memory Control Register */
+#define SXMRS		(SMEMC_VIRT + 0x24)  /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0		(SMEMC_VIRT + 0x28)  /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1		(SMEMC_VIRT + 0x2C)  /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0		(SMEMC_VIRT + 0x30)  /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1		(SMEMC_VIRT + 0x34)  /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0		(SMEMC_VIRT + 0x38)  /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1		(SMEMC_VIRT + 0x3C)  /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS		(SMEMC_VIRT + 0x40)  /* MRS value to be written to SDRAM */
+#define BOOT_DEF	(SMEMC_VIRT + 0x44)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+#define MEMCLKCFG	(SMEMC_VIRT + 0x68)  /* Clock Configuration */
+#define CSADRCFG0	(SMEMC_VIRT + 0x80)  /* Address Configuration Register for CS0 */
+#define CSADRCFG1	(SMEMC_VIRT + 0x84)  /* Address Configuration Register for CS1 */
+#define CSADRCFG2	(SMEMC_VIRT + 0x88)  /* Address Configuration Register for CS2 */
+#define CSADRCFG3	(SMEMC_VIRT + 0x8C)  /* Address Configuration Register for CS3 */
+#define CSMSADRCFG	(SMEMC_VIRT + 0xA0)  /* Chip Select Configuration Register */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s)	(SMEMC_VIRT + 0x28 + ((s)<<2))  /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s)	(SMEMC_VIRT + 0x30 + ((s)<<2))  /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s)		(SMEMC_VIRT + 0x38 + ((s)<<2))  /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDCNFG_DE0	(1 << 0)	/* SDRAM Bank 0 Enable */
+#define MDCNFG_DE1	(1 << 1)	/* SDRAM Bank 1 Enable */
+#define MDCNFG_DE2	(1 << 16)	/* SDRAM Bank 2 Enable */
+#define MDCNFG_DE3	(1 << 17)	/* SDRAM Bank 3 Enable */
+
+#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
+#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
+#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
+
+#endif

arch/arm/mach-pxa/littleton.c

@@ -0,0 +1,453 @@
+/*
+ *  linux/arch/arm/mach-pxa/littleton.c
+ *
+ *  Support for the Marvell Littleton Development Platform.
+ *
+ *  Author:	Jason Chagas (largely modified code)
+ *  Created:	Nov 20, 2006
+ *  Copyright:	(C) Copyright 2006 Marvell International Ltd.
+ *
+ *  2007-11-22  modified to align with latest kernel
+ *              eric miao <eric.miao@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/smc91x.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mfd/da903x.h>
+#include <linux/i2c/max732x.h>
+#include <linux/i2c/pxa-i2c.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "pxa300.h"
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include "littleton.h"
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
+
+#include "generic.h"
+
+#define GPIO_MMC1_CARD_DETECT	mfp_to_gpio(MFP_PIN_GPIO15)
+
+/* Littleton MFP configurations */
+static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
+	/* LCD */
+	GPIO54_LCD_LDD_0,
+	GPIO55_LCD_LDD_1,
+	GPIO56_LCD_LDD_2,
+	GPIO57_LCD_LDD_3,
+	GPIO58_LCD_LDD_4,
+	GPIO59_LCD_LDD_5,
+	GPIO60_LCD_LDD_6,
+	GPIO61_LCD_LDD_7,
+	GPIO62_LCD_LDD_8,
+	GPIO63_LCD_LDD_9,
+	GPIO64_LCD_LDD_10,
+	GPIO65_LCD_LDD_11,
+	GPIO66_LCD_LDD_12,
+	GPIO67_LCD_LDD_13,
+	GPIO68_LCD_LDD_14,
+	GPIO69_LCD_LDD_15,
+	GPIO70_LCD_LDD_16,
+	GPIO71_LCD_LDD_17,
+	GPIO72_LCD_FCLK,
+	GPIO73_LCD_LCLK,
+	GPIO74_LCD_PCLK,
+	GPIO75_LCD_BIAS,
+
+	/* SSP2 */
+	GPIO25_SSP2_SCLK,
+	GPIO27_SSP2_TXD,
+	GPIO17_GPIO,	/* SFRM as chip-select */
+
+	/* Debug Ethernet */
+	GPIO90_GPIO,
+
+	/* Keypad */
+	GPIO107_KP_DKIN_0,
+	GPIO108_KP_DKIN_1,
+	GPIO115_KP_MKIN_0,
+	GPIO116_KP_MKIN_1,
+	GPIO117_KP_MKIN_2,
+	GPIO118_KP_MKIN_3,
+	GPIO119_KP_MKIN_4,
+	GPIO120_KP_MKIN_5,
+	GPIO121_KP_MKOUT_0,
+	GPIO122_KP_MKOUT_1,
+	GPIO123_KP_MKOUT_2,
+	GPIO124_KP_MKOUT_3,
+	GPIO125_KP_MKOUT_4,
+
+	/* MMC1 */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+	GPIO15_GPIO, /* card detect */
+
+	/* UART3 */
+	GPIO107_UART3_CTS,
+	GPIO108_UART3_RTS,
+	GPIO109_UART3_TXD,
+	GPIO110_UART3_RXD,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (LITTLETON_ETH_PHYS + 0x300),
+		.end	= (LITTLETON_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
+		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	}
+};
+
+static struct smc91x_platdata littleton_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &littleton_smc91x_info,
+	},
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
+	[0] = {
+		/* VGA */
+		.pixclock	= 38250,
+		.xres		= 480,
+		.yres		= 640,
+		.bpp		= 16,
+		.hsync_len	= 8,
+		.left_margin	= 8,
+		.right_margin	= 24,
+		.vsync_len	= 2,
+		.upper_margin	= 2,
+		.lower_margin	= 4,
+		.sync		= 0,
+	},
+	[1] = {
+		/* QVGA */
+		.pixclock	= 153000,
+		.xres		= 240,
+		.yres		= 320,
+		.bpp		= 16,
+		.hsync_len	= 8,
+		.left_margin	= 8,
+		.right_margin	= 88,
+		.vsync_len	= 2,
+		.upper_margin	= 2,
+		.lower_margin	= 2,
+		.sync		= 0,
+	},
+};
+
+static struct pxafb_mach_info littleton_lcd_info = {
+	.modes			= tpo_tdo24mtea1_modes,
+	.num_modes		= 2,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP,
+};
+
+static void littleton_init_lcd(void)
+{
+	pxa_set_fb_info(NULL, &littleton_lcd_info);
+}
+#else
+static inline void littleton_init_lcd(void) {};
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master littleton_spi_info = {
+	.num_chipselect		= 1,
+};
+
+static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.gpio_cs	= LITTLETON_GPIO_LCD_CS,
+};
+
+static struct spi_board_info littleton_spi_devices[] __initdata = {
+	{
+		.modalias	= "tdo24m",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.controller_data= &littleton_tdo24m_chip,
+	},
+};
+
+static void __init littleton_init_spi(void)
+{
+	pxa2xx_set_spi_info(2, &littleton_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
+}
+#else
+static inline void littleton_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static const unsigned int littleton_matrix_key_map[] = {
+	/* KEY(row, col, key_code) */
+	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
+	KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
+	KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),
+
+	KEY(0, 3, KEY_KPASTERISK), 	/* * */
+	KEY(2, 3, KEY_KPDOT), 		/* # */
+
+	KEY(5, 4, KEY_ENTER),
+
+	KEY(5, 0, KEY_UP),
+	KEY(5, 1, KEY_DOWN),
+	KEY(5, 2, KEY_LEFT),
+	KEY(5, 3, KEY_RIGHT),
+	KEY(3, 2, KEY_HOME),
+	KEY(4, 1, KEY_END),
+	KEY(3, 3, KEY_BACK),
+
+	KEY(4, 0, KEY_SEND),
+	KEY(4, 2, KEY_VOLUMEUP),
+	KEY(4, 3, KEY_VOLUMEDOWN),
+
+	KEY(3, 0, KEY_F22),	/* soft1 */
+	KEY(3, 1, KEY_F23),	/* soft2 */
+};
+
+static struct matrix_keymap_data littleton_matrix_keymap_data = {
+	.keymap			= littleton_matrix_key_map,
+	.keymap_size		= ARRAY_SIZE(littleton_matrix_key_map),
+};
+
+static struct pxa27x_keypad_platform_data littleton_keypad_info = {
+	.matrix_key_rows	= 6,
+	.matrix_key_cols	= 5,
+	.matrix_keymap_data	= &littleton_matrix_keymap_data,
+
+	.enable_rotary0		= 1,
+	.rotary0_up_key		= KEY_UP,
+	.rotary0_down_key	= KEY_DOWN,
+
+	.debounce_interval	= 30,
+};
+static void __init littleton_init_keypad(void)
+{
+	pxa_set_keypad_info(&littleton_keypad_info);
+}
+#else
+static inline void littleton_init_keypad(void) {}
+#endif
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data littleton_mci_platform_data = {
+	.detect_delay_ms	= 200,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_MMC1_CARD_DETECT,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+};
+
+static void __init littleton_init_mmc(void)
+{
+	pxa_set_mci_info(&littleton_mci_platform_data);
+}
+#else
+static inline void littleton_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition littleton_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+	.enable_arbiter	= 1,
+	.num_cs		= 1,
+	.parts[0]	= littleton_nand_partitions,
+	.nr_parts[0]	= ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+	pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct led_info littleton_da9034_leds[] = {
+	[0] = {
+		.name	= "littleton:keypad1",
+		.flags	= DA9034_LED_RAMP,
+	},
+	[1] = {
+		.name	= "littleton:keypad2",
+		.flags	= DA9034_LED_RAMP,
+	},
+	[2] = {
+		.name	= "littleton:vibra",
+		.flags	= 0,
+	},
+};
+
+static struct da9034_touch_pdata littleton_da9034_touch = {
+	.x_inverted     = 1,
+	.interval_ms    = 20,
+};
+
+static struct da903x_subdev_info littleton_da9034_subdevs[] = {
+	{
+		.name		= "da903x-led",
+		.id		= DA9034_ID_LED_1,
+		.platform_data	= &littleton_da9034_leds[0],
+	}, {
+		.name		= "da903x-led",
+		.id		= DA9034_ID_LED_2,
+		.platform_data	= &littleton_da9034_leds[1],
+	}, {
+		.name		= "da903x-led",
+		.id		= DA9034_ID_VIBRA,
+		.platform_data	= &littleton_da9034_leds[2],
+	}, {
+		.name		= "da903x-backlight",
+		.id		= DA9034_ID_WLED,
+	}, {
+		.name		= "da9034-touch",
+		.id		= DA9034_ID_TOUCH,
+		.platform_data	= &littleton_da9034_touch,
+	},
+};
+
+static struct da903x_platform_data littleton_da9034_info = {
+	.num_subdevs	= ARRAY_SIZE(littleton_da9034_subdevs),
+	.subdevs	= littleton_da9034_subdevs,
+};
+
+static struct max732x_platform_data littleton_max7320_info = {
+	.gpio_base	= EXT0_GPIO_BASE,
+};
+
+static struct i2c_board_info littleton_i2c_info[] = {
+	[0] = {
+		.type		= "da9034",
+		.addr		= 0x34,
+		.platform_data	= &littleton_da9034_info,
+		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)),
+	},
+	[1] = {
+		.type		= "max7320",
+		.addr		= 0x50,
+		.platform_data	= &littleton_max7320_info,
+	},
+};
+
+static void __init littleton_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(littleton_i2c_info));
+}
+#else
+static inline void littleton_init_i2c(void) {}
+#endif /* CONFIG_I2C_PXA || CONFIG_I2C_PXA_MODULE */
+
+static void __init littleton_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	/*
+	 * Note: we depend bootloader set the correct
+	 * value to MSC register for SMC91x.
+	 */
+	platform_device_register(&smc91x_device);
+
+	littleton_init_spi();
+	littleton_init_i2c();
+	littleton_init_mmc();
+	littleton_init_lcd();
+	littleton_init_keypad();
+	littleton_init_nand();
+}
+
+MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
+	.atag_offset	= 0x100,
+	.map_io		= pxa3xx_map_io,
+	.nr_irqs	= LITTLETON_NR_IRQS,
+	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine	= littleton_init,
+	.restart	= pxa_restart,
+MACHINE_END

arch/arm/mach-pxa/littleton.h

@@ -0,0 +1,13 @@
+#ifndef __ASM_ARCH_LITTLETON_H
+#define __ASM_ARCH_LITTLETON_H
+
+#define LITTLETON_ETH_PHYS	0x30000000
+
+#define LITTLETON_GPIO_LCD_CS	(17)
+
+#define EXT0_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
+#define EXT0_GPIO(x)	(EXT0_GPIO_BASE + (x))
+
+#define LITTLETON_NR_IRQS	(IRQ_BOARD_START + 8)
+
+#endif /* __ASM_ARCH_LITTLETON_H */

arch/arm/mach-pxa/lpd270.c

@@ -0,0 +1,522 @@
+/*
+ * linux/arch/arm/mach-pxa/lpd270.c
+ *
+ * Support for the LogicPD PXA270 Card Engine.
+ * Derived from the mainstone code, which carries these notices:
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Nov 05, 2002
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include "pxa27x.h"
+#include "lpd270.h"
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <mach/smemc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long lpd270_pin_config[] __initdata = {
+	/* Chip Selects */
+	GPIO15_nCS_1,	/* Mainboard Flash */
+	GPIO78_nCS_2,	/* CPLD + Ethernet */
+
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+	GPIO16_PWM0_OUT,	/* Backlight */
+
+	/* USB Host */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO45_AC97_SYSCLK,
+
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
+
+static unsigned int lpd270_irq_enabled;
+
+static void lpd270_mask_irq(struct irq_data *d)
+{
+	int lpd270_irq = d->irq - LPD270_IRQ(0);
+
+	__raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
+
+	lpd270_irq_enabled &= ~(1 << lpd270_irq);
+	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+}
+
+static void lpd270_unmask_irq(struct irq_data *d)
+{
+	int lpd270_irq = d->irq - LPD270_IRQ(0);
+
+	lpd270_irq_enabled |= 1 << lpd270_irq;
+	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+}
+
+static struct irq_chip lpd270_irq_chip = {
+	.name		= "CPLD",
+	.irq_ack	= lpd270_mask_irq,
+	.irq_mask	= lpd270_mask_irq,
+	.irq_unmask	= lpd270_unmask_irq,
+};
+
+static void lpd270_irq_handler(struct irq_desc *desc)
+{
+	unsigned int irq;
+	unsigned long pending;
+
+	pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
+	do {
+		/* clear useless edge notification */
+		desc->irq_data.chip->irq_ack(&desc->irq_data);
+		if (likely(pending)) {
+			irq = LPD270_IRQ(0) + __ffs(pending);
+			generic_handle_irq(irq);
+
+			pending = __raw_readw(LPD270_INT_STATUS) &
+						lpd270_irq_enabled;
+		}
+	} while (pending);
+}
+
+static void __init lpd270_init_irq(void)
+{
+	int irq;
+
+	pxa27x_init_irq();
+
+	__raw_writew(0, LPD270_INT_MASK);
+	__raw_writew(0, LPD270_INT_STATUS);
+
+	/* setup extra LogicPD PXA270 irqs */
+	for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
+		irq_set_chip_and_handler(irq, &lpd270_irq_chip,
+					 handle_level_irq);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+	}
+	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
+	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
+}
+
+
+#ifdef CONFIG_PM
+static void lpd270_irq_resume(void)
+{
+	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
+}
+
+static struct syscore_ops lpd270_irq_syscore_ops = {
+	.resume = lpd270_irq_resume,
+};
+
+static int __init lpd270_irq_device_init(void)
+{
+	if (machine_is_logicpd_pxa270()) {
+		register_syscore_ops(&lpd270_irq_syscore_ops);
+		return 0;
+	}
+	return -ENODEV;
+}
+
+device_initcall(lpd270_irq_device_init);
+#endif
+
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= LPD270_ETH_PHYS,
+		.end	= (LPD270_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= LPD270_ETHERNET_IRQ,
+		.end	= LPD270_ETHERNET_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
+};
+
+static struct resource lpd270_flash_resources[] = {
+	[0] = {
+		.start	= PXA_CS0_PHYS,
+		.end	= PXA_CS0_PHYS + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_CS1_PHYS,
+		.end	= PXA_CS1_PHYS + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition lpd270_flash0_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	}, {
+		.name =		"Kernel",
+		.size =		0x00400000,
+		.offset =	0x00040000,
+	}, {
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00440000
+	},
+};
+
+static struct flash_platform_data lpd270_flash_data[2] = {
+	{
+		.name		= "processor-flash",
+		.map_name	= "cfi_probe",
+		.parts		= lpd270_flash0_partitions,
+		.nr_parts	= ARRAY_SIZE(lpd270_flash0_partitions),
+	}, {
+		.name		= "mainboard-flash",
+		.map_name	= "cfi_probe",
+		.parts		= NULL,
+		.nr_parts	= 0,
+	}
+};
+
+static struct platform_device lpd270_flash_device[2] = {
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 0,
+		.dev = {
+			.platform_data	= &lpd270_flash_data[0],
+		},
+		.resource	= &lpd270_flash_resources[0],
+		.num_resources	= 1,
+	}, {
+		.name		= "pxa2xx-flash",
+		.id		= 1,
+		.dev = {
+			.platform_data	= &lpd270_flash_data[1],
+		},
+		.resource	= &lpd270_flash_resources[1],
+		.num_resources	= 1,
+	},
+};
+
+static struct pwm_lookup lpd270_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data lpd270_backlight_data = {
+	.max_brightness	= 1,
+	.dft_brightness	= 1,
+	.enable_gpio	= -1,
+};
+
+static struct platform_device lpd270_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &pxa27x_device_pwm0.dev,
+		.platform_data = &lpd270_backlight_data,
+	},
+};
+
+/* 5.7" TFT QVGA (LoLo display number 1) */
+static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
+	.pixclock		= 150000,
+	.xres			= 320,
+	.yres			= 240,
+	.bpp			= 16,
+	.hsync_len		= 0x14,
+	.left_margin		= 0x28,
+	.right_margin		= 0x0a,
+	.vsync_len		= 0x02,
+	.upper_margin		= 0x08,
+	.lower_margin		= 0x14,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info sharp_lq057q3dc02 = {
+	.modes			= &sharp_lq057q3dc02_mode,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
+};
+
+/* 12.1" TFT SVGA (LoLo display number 2) */
+static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
+	.pixclock		= 50000,
+	.xres			= 800,
+	.yres			= 600,
+	.bpp			= 16,
+	.hsync_len		= 0x05,
+	.left_margin		= 0x52,
+	.right_margin		= 0x05,
+	.vsync_len		= 0x04,
+	.upper_margin		= 0x14,
+	.lower_margin		= 0x0a,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info sharp_lq121s1dg31 = {
+	.modes			= &sharp_lq121s1dg31_mode,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
+};
+
+/* 3.6" TFT QVGA (LoLo display number 3) */
+static struct pxafb_mode_info sharp_lq036q1da01_mode = {
+	.pixclock		= 150000,
+	.xres			= 320,
+	.yres			= 240,
+	.bpp			= 16,
+	.hsync_len		= 0x0e,
+	.left_margin		= 0x04,
+	.right_margin		= 0x0a,
+	.vsync_len		= 0x03,
+	.upper_margin		= 0x03,
+	.lower_margin		= 0x03,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info sharp_lq036q1da01 = {
+	.modes			= &sharp_lq036q1da01_mode,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
+};
+
+/* 6.4" TFT VGA (LoLo display number 5) */
+static struct pxafb_mode_info sharp_lq64d343_mode = {
+	.pixclock		= 25000,
+	.xres			= 640,
+	.yres			= 480,
+	.bpp			= 16,
+	.hsync_len		= 0x31,
+	.left_margin		= 0x89,
+	.right_margin		= 0x19,
+	.vsync_len		= 0x12,
+	.upper_margin		= 0x22,
+	.lower_margin		= 0x00,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info sharp_lq64d343 = {
+	.modes			= &sharp_lq64d343_mode,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
+};
+
+/* 10.4" TFT VGA (LoLo display number 7) */
+static struct pxafb_mode_info sharp_lq10d368_mode = {
+	.pixclock		= 25000,
+	.xres			= 640,
+	.yres			= 480,
+	.bpp			= 16,
+	.hsync_len		= 0x31,
+	.left_margin		= 0x89,
+	.right_margin		= 0x19,
+	.vsync_len		= 0x12,
+	.upper_margin		= 0x22,
+	.lower_margin		= 0x00,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info sharp_lq10d368 = {
+	.modes			= &sharp_lq10d368_mode,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
+};
+
+/* 3.5" TFT QVGA (LoLo display number 8) */
+static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
+	.pixclock		= 150000,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 0x0e,
+	.left_margin		= 0x0a,
+	.right_margin		= 0x0a,
+	.vsync_len		= 0x03,
+	.upper_margin		= 0x05,
+	.lower_margin		= 0x14,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info sharp_lq035q7db02_20 = {
+	.modes			= &sharp_lq035q7db02_20_mode,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
+};
+
+static struct pxafb_mach_info *lpd270_lcd_to_use;
+
+static int __init lpd270_set_lcd(char *str)
+{
+	if (!strncasecmp(str, "lq057q3dc02", 11)) {
+		lpd270_lcd_to_use = &sharp_lq057q3dc02;
+	} else if (!strncasecmp(str, "lq121s1dg31", 11)) {
+		lpd270_lcd_to_use = &sharp_lq121s1dg31;
+	} else if (!strncasecmp(str, "lq036q1da01", 11)) {
+		lpd270_lcd_to_use = &sharp_lq036q1da01;
+	} else if (!strncasecmp(str, "lq64d343", 8)) {
+		lpd270_lcd_to_use = &sharp_lq64d343;
+	} else if (!strncasecmp(str, "lq10d368", 8)) {
+		lpd270_lcd_to_use = &sharp_lq10d368;
+	} else if (!strncasecmp(str, "lq035q7db02-20", 14)) {
+		lpd270_lcd_to_use = &sharp_lq035q7db02_20;
+	} else {
+		printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
+	}
+
+	return 1;
+}
+
+__setup("lcd=", lpd270_set_lcd);
+
+static struct platform_device *platform_devices[] __initdata = {
+	&smc91x_device,
+	&lpd270_backlight_device,
+	&lpd270_flash_device[0],
+	&lpd270_flash_device[1],
+};
+
+static struct pxaohci_platform_data lpd270_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init lpd270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
+	lpd270_flash_data[1].width = 4;
+
+	/*
+	 * System bus arbiter setting:
+	 * - Core_Park
+	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+	 */
+	ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+	pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup));
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+	pxa_set_ac97_info(NULL);
+
+	if (lpd270_lcd_to_use != NULL)
+		pxa_set_fb_info(NULL, lpd270_lcd_to_use);
+
+	pxa_set_ohci_info(&lpd270_ohci_platform_data);
+}
+
+
+static struct map_desc lpd270_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long)LPD270_CPLD_VIRT,
+		.pfn		= __phys_to_pfn(LPD270_CPLD_PHYS),
+		.length		= LPD270_CPLD_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init lpd270_map_io(void)
+{
+	pxa27x_map_io();
+	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
+
+	/* for use I SRAM as framebuffer.  */
+	PSLR |= 0x00000F04;
+	PCFR  = 0x00000066;
+}
+
+MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
+	/* Maintainer: Peter Barada */
+	.atag_offset	= 0x100,
+	.map_io		= lpd270_map_io,
+	.nr_irqs	= LPD270_NR_IRQS,
+	.init_irq	= lpd270_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine	= lpd270_init,
+	.restart	= pxa_restart,
+MACHINE_END

arch/arm/mach-pxa/lubbock.c

@@ -0,0 +1,623 @@
+/*
+ *  linux/arch/arm/mach-pxa/lubbock.c
+ *
+ *  Support for the Intel DBPXA250 Development Platform.
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#include <linux/clkdev.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+#include <linux/major.h>
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/pxa2xx_spi.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/hardware/sa1111.h>
+
+#include "pxa25x.h"
+#include <mach/audio.h>
+#include <mach/lubbock.h>
+#include "udc.h"
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include "pm.h"
+#include <mach/smemc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long lubbock_pin_config[] __initdata = {
+	GPIO15_nCS_1,	/* CS1 - Flash */
+	GPIO78_nCS_2,	/* CS2 - Baseboard FGPA */
+	GPIO79_nCS_3,	/* CS3 - SMC ethernet */
+	GPIO80_nCS_4,	/* CS4 - SA1111 */
+
+	/* SSP data pins */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* LCD - 16bpp DSTN */
+	GPIOxx_LCD_DSTN_16BPP,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* SA1111 chip */
+	GPIO11_3_6MHz,
+
+	/* wakeup */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
+#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
+
+void lubbock_set_hexled(uint32_t value)
+{
+	LUB_HEXLED = value;
+}
+
+void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(lubbock_set_misc_wr);
+
+static int lubbock_udc_is_connected(void)
+{
+	return (LUB_MISC_RD & (1 << 9)) == 0;
+}
+
+static struct pxa2xx_udc_mach_info udc_info __initdata = {
+	.udc_is_connected	= lubbock_udc_is_connected,
+	// no D+ pullup; lubbock can't connect/disconnect in software
+};
+
+static void lubbock_init_pcmcia(void)
+{
+	struct clk *clk;
+
+	/* Add an alias for the SA1111 PCMCIA clock */
+	clk = clk_get_sys("pxa2xx-pcmcia", NULL);
+	if (!IS_ERR(clk)) {
+		clkdev_create(clk, NULL, "1800");
+		clk_put(clk);
+	}
+}
+
+static struct resource sa1111_resources[] = {
+	[0] = {
+		.start	= 0x10000000,
+		.end	= 0x10001fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= LUBBOCK_SA1111_IRQ,
+		.end	= LUBBOCK_SA1111_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sa1111_platform_data sa1111_info = {
+	.irq_base	= LUBBOCK_SA1111_IRQ_BASE,
+	.disable_devs	= SA1111_DEVID_SAC,
+};
+
+static struct platform_device sa1111_device = {
+	.name		= "sa1111",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(sa1111_resources),
+	.resource	= sa1111_resources,
+	.dev		= {
+		.platform_data	= &sa1111_info,
+	},
+};
+
+/* ADS7846 is connected through SSP ... and if your board has J5 populated,
+ * you can select it to replace the ucb1400 by switching the touchscreen cable
+ * (to J5) and poking board registers (as done below).  Else it's only useful
+ * for the temperature sensors.
+ */
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.num_chipselect	= 1,
+};
+
+static int lubbock_ads7846_pendown_state(void)
+{
+	/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
+	return 0;
+}
+
+static struct ads7846_platform_data ads_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,		/* internal, no cap */
+	.get_pendown_state	= lubbock_ads7846_pendown_state,
+	// .x_plate_ohms		= 500,	/* GUESS! */
+	// .y_plate_ohms		= 500,	/* GUESS! */
+};
+
+static void ads7846_cs(u32 command)
+{
+	static const unsigned	TS_nCS = 1 << 11;
+	lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
+}
+
+static struct pxa2xx_spi_chip ads_hw = {
+	.tx_threshold		= 1,
+	.rx_threshold		= 2,
+	.cs_control		= ads7846_cs,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = { {
+	.modalias	= "ads7846",
+	.platform_data	= &ads_info,
+	.controller_data = &ads_hw,
+	.irq		= LUBBOCK_BB_IRQ,
+	.max_speed_hz	= 120000 /* max sample rate at 3V */
+				* 26 /* command + data + overhead */,
+	.bus_num	= 1,
+	.chip_select	= 0,
+},
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start	= 0x0c000c00,
+		.end	= 0x0c0fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= LUBBOCK_ETH_IRQ,
+		.end	= LUBBOCK_ETH_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+	[2] = {
+		.name	= "smc91x-attrib",
+		.start	= 0x0e000000,
+		.end	= 0x0e0fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct smc91x_platdata lubbock_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &lubbock_smc91x_info,
+	},
+};
+
+static struct resource flash_resources[] = {
+	[0] = {
+		.start	= 0x00000000,
+		.end	= SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0x04000000,
+		.end	= 0x04000000 + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition lubbock_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	},{
+		.name =		"Kernel",
+		.size =		0x00100000,
+		.offset =	0x00040000,
+	},{
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00140000
+	}
+};
+
+static struct flash_platform_data lubbock_flash_data[2] = {
+	{
+		.map_name	= "cfi_probe",
+		.parts		= lubbock_partitions,
+		.nr_parts	= ARRAY_SIZE(lubbock_partitions),
+	}, {
+		.map_name	= "cfi_probe",
+		.parts		= NULL,
+		.nr_parts	= 0,
+	}
+};
+
+static struct platform_device lubbock_flash_device[2] = {
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 0,
+		.dev = {
+			.platform_data = &lubbock_flash_data[0],
+		},
+		.resource = &flash_resources[0],
+		.num_resources = 1,
+	},
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 1,
+		.dev = {
+			.platform_data = &lubbock_flash_data[1],
+		},
+		.resource = &flash_resources[1],
+		.num_resources = 1,
+	},
+};
+
+static struct resource lubbock_cplds_resources[] = {
+	[0] = {
+		.start	= LUBBOCK_FPGA_PHYS + 0xc0,
+		.end	= LUBBOCK_FPGA_PHYS + 0xe0 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_GPIO_TO_IRQ(0),
+		.end	= PXA_GPIO_TO_IRQ(0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+	[2] = {
+		.start	= LUBBOCK_IRQ(0),
+		.end	= LUBBOCK_IRQ(6),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lubbock_cplds_device = {
+	.name		= "pxa_cplds_irqs",
+	.id		= -1,
+	.resource	= &lubbock_cplds_resources[0],
+	.num_resources	= 3,
+};
+
+
+static struct platform_device *devices[] __initdata = {
+	&sa1111_device,
+	&smc91x_device,
+	&lubbock_flash_device[0],
+	&lubbock_flash_device[1],
+	&lubbock_cplds_device,
+};
+
+static struct pxafb_mode_info sharp_lm8v31_mode = {
+	.pixclock	= 270000,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 16,
+	.hsync_len	= 1,
+	.left_margin	= 3,
+	.right_margin	= 3,
+	.vsync_len	= 1,
+	.upper_margin	= 0,
+	.lower_margin	= 0,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.cmap_greyscale	= 0,
+};
+
+static struct pxafb_mach_info sharp_lm8v31 = {
+	.modes		= &sharp_lm8v31_mode,
+	.num_modes	= 1,
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
+			  LCD_AC_BIAS_FREQ(255),
+};
+
+#define	MMC_POLL_RATE		msecs_to_jiffies(1000)
+
+static void lubbock_mmc_poll(unsigned long);
+static irq_handler_t mmc_detect_int;
+
+static struct timer_list mmc_timer = {
+	.function	= lubbock_mmc_poll,
+};
+
+static void lubbock_mmc_poll(unsigned long data)
+{
+	unsigned long flags;
+
+	/* clear any previous irq state, then ... */
+	local_irq_save(flags);
+	LUB_IRQ_SET_CLR &= ~(1 << 0);
+	local_irq_restore(flags);
+
+	/* poll until mmc/sd card is removed */
+	if (LUB_IRQ_SET_CLR & (1 << 0))
+		mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
+	else {
+		(void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
+		enable_irq(LUBBOCK_SD_IRQ);
+	}
+}
+
+static irqreturn_t lubbock_detect_int(int irq, void *data)
+{
+	/* IRQ is level triggered; disable, and poll for removal */
+	disable_irq(irq);
+	mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
+
+	return mmc_detect_int(irq, data);
+}
+
+static int lubbock_mci_init(struct device *dev,
+		irq_handler_t detect_int,
+		void *data)
+{
+	/* detect card insert/eject */
+	mmc_detect_int = detect_int;
+	init_timer(&mmc_timer);
+	mmc_timer.data = (unsigned long) data;
+	return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
+			   0, "lubbock-sd-detect", data);
+}
+
+static int lubbock_mci_get_ro(struct device *dev)
+{
+	return (LUB_MISC_RD & (1 << 2)) != 0;
+}
+
+static void lubbock_mci_exit(struct device *dev, void *data)
+{
+	free_irq(LUBBOCK_SD_IRQ, data);
+	del_timer_sync(&mmc_timer);
+}
+
+static struct pxamci_platform_data lubbock_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.detect_delay_ms	= 10,
+	.init 			= lubbock_mci_init,
+	.get_ro			= lubbock_mci_get_ro,
+	.exit 			= lubbock_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+};
+
+static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (mode & IR_SIRMODE) {
+		LUB_MISC_WR &= ~(1 << 4);
+	} else if (mode & IR_FIRMODE) {
+		LUB_MISC_WR |= 1 << 4;
+	}
+	pxa2xx_transceiver_mode(dev, mode);
+	local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data lubbock_ficp_platform_data = {
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE,
+	.transceiver_mode	= lubbock_irda_transceiver_mode,
+};
+
+static void __init lubbock_init(void)
+{
+	int flashboot = (LUB_CONF_SWITCHES & 1);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	lubbock_init_pcmcia();
+
+	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
+	pxa_set_udc_info(&udc_info);
+	pxa_set_fb_info(NULL, &sharp_lm8v31);
+	pxa_set_mci_info(&lubbock_mci_platform_data);
+	pxa_set_ficp_info(&lubbock_ficp_platform_data);
+	pxa_set_ac97_info(NULL);
+
+	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
+		(__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
+	/* Compensate for the nROMBT switch which swaps the flash banks */
+	printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
+	       flashboot?"Flash":"ROM", flashboot);
+
+	lubbock_flash_data[flashboot^1].name = "application-flash";
+	lubbock_flash_data[flashboot].name = "boot-rom";
+	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+}
+
+static struct map_desc lubbock_io_desc[] __initdata = {
+  	{	/* CPLD */
+		.virtual	=  LUBBOCK_FPGA_VIRT,
+		.pfn		= __phys_to_pfn(LUBBOCK_FPGA_PHYS),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init lubbock_map_io(void)
+{
+	pxa25x_map_io();
+	iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
+
+	PCFR |= PCFR_OPDE;
+}
+
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct lubbock_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} lubbock_leds[] = {
+	{ "lubbock:D28", "default-on", },
+	{ "lubbock:D27", "cpu0", },
+	{ "lubbock:D26", "heartbeat" },
+	{ "lubbock:D25", },
+	{ "lubbock:D24", },
+	{ "lubbock:D23", },
+	{ "lubbock:D22", },
+	{ "lubbock:D21", },
+};
+
+static void lubbock_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	struct lubbock_led *led = container_of(cdev,
+					 struct lubbock_led, cdev);
+	u32 reg = LUB_DISC_BLNK_LED;
+
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
+
+	LUB_DISC_BLNK_LED = reg;
+}
+
+static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
+{
+	struct lubbock_led *led = container_of(cdev,
+					 struct lubbock_led, cdev);
+	u32 reg = LUB_DISC_BLNK_LED;
+
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init lubbock_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_lubbock())
+		return -ENODEV;
+
+	/* All ON */
+	LUB_DISC_BLNK_LED |= 0xff;
+	for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
+		struct lubbock_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = lubbock_leds[i].name;
+		led->cdev.brightness_set = lubbock_led_set;
+		led->cdev.brightness_get = lubbock_led_get;
+		led->cdev.default_trigger = lubbock_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(lubbock_leds_init);
+#endif
+
+MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
+	/* Maintainer: MontaVista Software Inc. */
+	.map_io		= lubbock_map_io,
+	.nr_irqs	= LUBBOCK_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine	= lubbock_init,
+	.restart	= pxa_restart,
+MACHINE_END

arch/arm/mach-pxa/mainstone.c

@@ -0,0 +1,678 @@
+/*
+ *  linux/arch/arm/mach-pxa/mainstone.c
+ *
+ *  Support for the Intel HCDDBBVA0 Development Platform.
+ *  (go figure how they came up with such name...)
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Nov 05, 2002
+ *  Copyright:	MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
+#include <linux/i2c/pxa-i2c.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include "pxa27x.h"
+#include <mach/mainstone.h>
+#include <mach/audio.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/keypad-pxa27x.h>
+#include <mach/smemc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long mainstone_pin_config[] = {
+	/* Chip Select */
+	GPIO15_nCS_1,
+
+	/* LCD - 16bpp Active TFT */
+	GPIOxx_LCD_TFT_16BPP,
+	GPIO16_PWM0_OUT,	/* Backlight */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* USB Host Port 1 */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO45_AC97_SYSCLK,
+
+	/* Keypad */
+	GPIO93_KP_DKIN_0,
+	GPIO94_KP_DKIN_1,
+	GPIO95_KP_DKIN_2,
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO96_KP_MKOUT_6,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (MST_ETH_PHYS + 0x300),
+		.end	= (MST_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= MAINSTONE_IRQ(3),
+		.end	= MAINSTONE_IRQ(3),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata mainstone_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &mainstone_smc91x_info,
+	},
+};
+
+static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
+{
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		MST_MSCWR2 &= ~MST_MSCWR2_AC97_SPKROFF;
+	return 0;
+}
+
+static void mst_audio_shutdown(struct snd_pcm_substream *substream, void *priv)
+{
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
+}
+
+static long mst_audio_suspend_mask;
+
+static void mst_audio_suspend(void *priv)
+{
+	mst_audio_suspend_mask = MST_MSCWR2;
+	MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
+}
+
+static void mst_audio_resume(void *priv)
+{
+	MST_MSCWR2 &= mst_audio_suspend_mask | ~MST_MSCWR2_AC97_SPKROFF;
+}
+
+static pxa2xx_audio_ops_t mst_audio_ops = {
+	.startup	= mst_audio_startup,
+	.shutdown	= mst_audio_shutdown,
+	.suspend	= mst_audio_suspend,
+	.resume		= mst_audio_resume,
+};
+
+static struct resource flash_resources[] = {
+	[0] = {
+		.start	= PXA_CS0_PHYS,
+		.end	= PXA_CS0_PHYS + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_CS1_PHYS,
+		.end	= PXA_CS1_PHYS + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition mainstoneflash0_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	},{
+		.name =		"Kernel",
+		.size =		0x00400000,
+		.offset =	0x00040000,
+	},{
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00440000
+	}
+};
+
+static struct flash_platform_data mst_flash_data[2] = {
+	{
+		.map_name	= "cfi_probe",
+		.parts		= mainstoneflash0_partitions,
+		.nr_parts	= ARRAY_SIZE(mainstoneflash0_partitions),
+	}, {
+		.map_name	= "cfi_probe",
+		.parts		= NULL,
+		.nr_parts	= 0,
+	}
+};
+
+static struct platform_device mst_flash_device[2] = {
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 0,
+		.dev = {
+			.platform_data = &mst_flash_data[0],
+		},
+		.resource = &flash_resources[0],
+		.num_resources = 1,
+	},
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 1,
+		.dev = {
+			.platform_data = &mst_flash_data[1],
+		},
+		.resource = &flash_resources[1],
+		.num_resources = 1,
+	},
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup mainstone_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
+static struct platform_pwm_backlight_data mainstone_backlight_data = {
+	.max_brightness	= 1023,
+	.dft_brightness	= 1023,
+	.enable_gpio	= -1,
+};
+
+static struct platform_device mainstone_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent = &pxa27x_device_pwm0.dev,
+		.platform_data = &mainstone_backlight_data,
+	},
+};
+
+static void __init mainstone_backlight_register(void)
+{
+	int ret;
+
+	pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup));
+
+	ret = platform_device_register(&mainstone_backlight_device);
+	if (ret) {
+		printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
+		pwm_remove_table(mainstone_pwm_lookup,
+				 ARRAY_SIZE(mainstone_pwm_lookup));
+	}
+}
+#else
+#define mainstone_backlight_register()	do { } while (0)
+#endif
+
+static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
+	.pixclock		= 50000,
+	.xres			= 640,
+	.yres			= 480,
+	.bpp			= 16,
+	.hsync_len		= 1,
+	.left_margin		= 0x9f,
+	.right_margin		= 1,
+	.vsync_len		= 44,
+	.upper_margin		= 0,
+	.lower_margin		= 0,
+	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
+	.pixclock		= 110000,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 4,
+	.left_margin		= 8,
+	.right_margin		= 20,
+	.vsync_len		= 3,
+	.upper_margin		= 1,
+	.lower_margin		= 10,
+	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info mainstone_pxafb_info = {
+	.num_modes      	= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data)
+{
+	int err;
+
+	/* make sure SD/Memory Stick multiplexer's signals
+	 * are routed to MMC controller
+	 */
+	MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
+
+	err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, 0,
+			     "MMC card detect", data);
+	if (err)
+		printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+
+	return err;
+}
+
+static int mainstone_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data* p_d = dev->platform_data;
+
+	if (( 1 << vdd) & p_d->ocr_mask) {
+		printk(KERN_DEBUG "%s: on\n", __func__);
+		MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
+		MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
+	} else {
+		printk(KERN_DEBUG "%s: off\n", __func__);
+		MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
+	}
+	return 0;
+}
+
+static void mainstone_mci_exit(struct device *dev, void *data)
+{
+	free_irq(MAINSTONE_MMC_IRQ, data);
+}
+
+static struct pxamci_platform_data mainstone_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= mainstone_mci_init,
+	.setpower 		= mainstone_mci_setpower,
+	.exit			= mainstone_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+};
+
+static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (mode & IR_SIRMODE) {
+		MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
+	} else if (mode & IR_FIRMODE) {
+		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
+	}
+	pxa2xx_transceiver_mode(dev, mode);
+	if (mode & IR_OFF) {
+		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
+	} else {
+		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
+	}
+	local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data mainstone_ficp_platform_data = {
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= mainstone_irda_transceiver_mode,
+};
+
+static struct gpio_keys_button gpio_keys_button[] = {
+	[0] = {
+		.desc	= "wakeup",
+		.code	= KEY_SUSPEND,
+		.type	= EV_KEY,
+		.gpio	= 1,
+		.wakeup	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data mainstone_gpio_keys = {
+	.buttons	= gpio_keys_button,
+	.nbuttons	= 1,
+};
+
+static struct platform_device mst_gpio_keys_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &mainstone_gpio_keys,
+	},
+};
+
+static struct resource mst_cplds_resources[] = {
+	[0] = {
+		.start	= MST_FPGA_PHYS + 0xc0,
+		.end	= MST_FPGA_PHYS + 0xe0 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_GPIO_TO_IRQ(0),
+		.end	= PXA_GPIO_TO_IRQ(0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+	[2] = {
+		.start	= MAINSTONE_IRQ(0),
+		.end	= MAINSTONE_IRQ(15),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mst_cplds_device = {
+	.name		= "pxa_cplds_irqs",
+	.id		= -1,
+	.resource	= &mst_cplds_resources[0],
+	.num_resources	= 3,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&smc91x_device,
+	&mst_flash_device[0],
+	&mst_flash_device[1],
+	&mst_gpio_keys_device,
+	&mst_cplds_device,
+};
+
+static struct pxaohci_platform_data mainstone_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static const unsigned int mainstone_matrix_keys[] = {
+	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
+	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
+	KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I),
+	KEY(3, 1, KEY_J), KEY(4, 1, KEY_K), KEY(5, 1, KEY_L),
+	KEY(0, 2, KEY_M), KEY(1, 2, KEY_N), KEY(2, 2, KEY_O),
+	KEY(3, 2, KEY_P), KEY(4, 2, KEY_Q), KEY(5, 2, KEY_R),
+	KEY(0, 3, KEY_S), KEY(1, 3, KEY_T), KEY(2, 3, KEY_U),
+	KEY(3, 3, KEY_V), KEY(4, 3, KEY_W), KEY(5, 3, KEY_X),
+	KEY(2, 4, KEY_Y), KEY(3, 4, KEY_Z),
+
+	KEY(0, 4, KEY_DOT),	/* . */
+	KEY(1, 4, KEY_CLOSE),	/* @ */
+	KEY(4, 4, KEY_SLASH),
+	KEY(5, 4, KEY_BACKSLASH),
+	KEY(0, 5, KEY_HOME),
+	KEY(1, 5, KEY_LEFTSHIFT),
+	KEY(2, 5, KEY_SPACE),
+	KEY(3, 5, KEY_SPACE),
+	KEY(4, 5, KEY_ENTER),
+	KEY(5, 5, KEY_BACKSPACE),
+
+	KEY(0, 6, KEY_UP),
+	KEY(1, 6, KEY_DOWN),
+	KEY(2, 6, KEY_LEFT),
+	KEY(3, 6, KEY_RIGHT),
+	KEY(4, 6, KEY_SELECT),
+};
+
+static struct matrix_keymap_data mainstone_matrix_keymap_data = {
+	.keymap			= mainstone_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(mainstone_matrix_keys),
+};
+
+struct pxa27x_keypad_platform_data mainstone_keypad_info = {
+	.matrix_key_rows	= 6,
+	.matrix_key_cols	= 7,
+	.matrix_keymap_data	= &mainstone_matrix_keymap_data,
+
+	.enable_rotary0		= 1,
+	.rotary0_up_key		= KEY_UP,
+	.rotary0_down_key	= KEY_DOWN,
+
+	.debounce_interval	= 30,
+};
+
+static void __init mainstone_init_keypad(void)
+{
+	pxa_set_keypad_info(&mainstone_keypad_info);
+}
+#else
+static inline void mainstone_init_keypad(void) {}
+#endif
+
+static void __init mainstone_init(void)
+{
+	int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
+	mst_flash_data[1].width = 4;
+
+	/* Compensate for SW7 which swaps the flash banks */
+	mst_flash_data[SW7].name = "processor-flash";
+	mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
+
+	printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
+	       mst_flash_data[0].name);
+
+	/* system bus arbiter setting
+	 * - Core_Park
+	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+	 */
+	ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+	/* reading Mainstone's "Virtual Configuration Register"
+	   might be handy to select LCD type here */
+	if (0)
+		mainstone_pxafb_info.modes = &toshiba_ltm04c380k_mode;
+	else
+		mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
+
+	pxa_set_fb_info(NULL, &mainstone_pxafb_info);
+	mainstone_backlight_register();
+
+	pxa_set_mci_info(&mainstone_mci_platform_data);
+	pxa_set_ficp_info(&mainstone_ficp_platform_data);
+	pxa_set_ohci_info(&mainstone_ohci_platform_data);
+	pxa_set_i2c_info(NULL);
+	pxa_set_ac97_info(&mst_audio_ops);
+
+	mainstone_init_keypad();
+}
+
+
+static struct map_desc mainstone_io_desc[] __initdata = {
+  	{	/* CPLD */
+		.virtual	=  MST_FPGA_VIRT,
+		.pfn		= __phys_to_pfn(MST_FPGA_PHYS),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init mainstone_map_io(void)
+{
+	pxa27x_map_io();
+	iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
+
+ 	/*	for use I SRAM as framebuffer.	*/
+ 	PSLR |= 0xF04;
+ 	PCFR = 0x66;
+}
+
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct mainstone_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} mainstone_leds[] = {
+	{ "mainstone:D28", "default-on", },
+	{ "mainstone:D27", "cpu0", },
+	{ "mainstone:D26", "heartbeat" },
+	{ "mainstone:D25", },
+	{ "mainstone:D24", },
+	{ "mainstone:D23", },
+	{ "mainstone:D22", },
+	{ "mainstone:D21", },
+};
+
+static void mainstone_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	struct mainstone_led *led = container_of(cdev,
+					 struct mainstone_led, cdev);
+	u32 reg = MST_LEDCTRL;
+
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
+
+	MST_LEDCTRL = reg;
+}
+
+static enum led_brightness mainstone_led_get(struct led_classdev *cdev)
+{
+	struct mainstone_led *led = container_of(cdev,
+					 struct mainstone_led, cdev);
+	u32 reg = MST_LEDCTRL;
+
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init mainstone_leds_init(void)
+{
+	int i;
+
+	if (!machine_is_mainstone())
+		return -ENODEV;
+
+	/* All ON */
+	MST_LEDCTRL |= 0xff;
+	for (i = 0; i < ARRAY_SIZE(mainstone_leds); i++) {
+		struct mainstone_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = mainstone_leds[i].name;
+		led->cdev.brightness_set = mainstone_led_set;
+		led->cdev.brightness_get = mainstone_led_get;
+		led->cdev.default_trigger = mainstone_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(mainstone_leds_init);
+#endif
+
+MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
+	/* Maintainer: MontaVista Software Inc. */
+	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
+	.map_io		= mainstone_map_io,
+	.nr_irqs	= MAINSTONE_NR_IRQS,
+	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine	= mainstone_init,
+	.restart	= pxa_restart,
+MACHINE_END

arch/arm/mach-pxa/mfp-pxa27x.h

@@ -0,0 +1,471 @@
+#ifndef __ASM_ARCH_MFP_PXA27X_H
+#define __ASM_ARCH_MFP_PXA27X_H
+
+/*
+ * NOTE:  for those special-function bidirectional GPIOs, as described
+ * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
+ * alternative is preserved, the direction is actually selected by the
+ * specific controller, and this should work in most cases.
+ */
+
+#include "mfp-pxa2xx.h"
+
+/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
+ * bit is set, regardless of the GPIO configuration
+ */
+#define GPIO3_GPIO		MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO		MFP_CFG_IN(GPIO4, AF0)
+
+/* GPIO */
+#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF0)
+#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF0)
+#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF0)
+#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF0)
+#define GPIO90_GPIO		MFP_CFG_IN(GPIO90, AF0)
+#define GPIO91_GPIO		MFP_CFG_IN(GPIO91, AF0)
+#define GPIO92_GPIO		MFP_CFG_IN(GPIO92, AF0)
+#define GPIO93_GPIO		MFP_CFG_IN(GPIO93, AF0)
+#define GPIO94_GPIO		MFP_CFG_IN(GPIO94, AF0)
+#define GPIO95_GPIO		MFP_CFG_IN(GPIO95, AF0)
+#define GPIO96_GPIO		MFP_CFG_IN(GPIO96, AF0)
+#define GPIO97_GPIO		MFP_CFG_IN(GPIO97, AF0)
+#define GPIO98_GPIO		MFP_CFG_IN(GPIO98, AF0)
+#define GPIO99_GPIO		MFP_CFG_IN(GPIO99, AF0)
+#define GPIO100_GPIO		MFP_CFG_IN(GPIO100, AF0)
+#define GPIO101_GPIO		MFP_CFG_IN(GPIO101, AF0)
+#define GPIO102_GPIO		MFP_CFG_IN(GPIO102, AF0)
+#define GPIO103_GPIO		MFP_CFG_IN(GPIO103, AF0)
+#define GPIO104_GPIO		MFP_CFG_IN(GPIO104, AF0)
+#define GPIO105_GPIO		MFP_CFG_IN(GPIO105, AF0)
+#define GPIO106_GPIO		MFP_CFG_IN(GPIO106, AF0)
+#define GPIO107_GPIO		MFP_CFG_IN(GPIO107, AF0)
+#define GPIO108_GPIO		MFP_CFG_IN(GPIO108, AF0)
+#define GPIO109_GPIO		MFP_CFG_IN(GPIO109, AF0)
+#define GPIO110_GPIO		MFP_CFG_IN(GPIO110, AF0)
+#define GPIO111_GPIO		MFP_CFG_IN(GPIO111, AF0)
+#define GPIO112_GPIO		MFP_CFG_IN(GPIO112, AF0)
+#define GPIO113_GPIO		MFP_CFG_IN(GPIO113, AF0)
+#define GPIO114_GPIO		MFP_CFG_IN(GPIO114, AF0)
+#define GPIO115_GPIO		MFP_CFG_IN(GPIO115, AF0)
+#define GPIO116_GPIO		MFP_CFG_IN(GPIO116, AF0)
+#define GPIO117_GPIO		MFP_CFG_IN(GPIO117, AF0)
+#define GPIO118_GPIO		MFP_CFG_IN(GPIO118, AF0)
+#define GPIO119_GPIO		MFP_CFG_IN(GPIO119, AF0)
+#define GPIO120_GPIO		MFP_CFG_IN(GPIO120, AF0)
+
+/* Crystal and Clock Signals */
+#define GPIO9_HZ_CLK		MFP_CFG_OUT(GPIO9,  AF1, DRIVE_LOW)
+#define GPIO10_HZ_CLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO11_48_MHz		MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
+#define GPIO12_48_MHz		MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
+#define GPIO13_CLK_EXT		MFP_CFG_IN(GPIO13, AF1)
+
+/* OS Timer Signals */
+#define GPIO11_EXT_SYNC_0	MFP_CFG_IN(GPIO11, AF1)
+#define GPIO12_EXT_SYNC_1	MFP_CFG_IN(GPIO12, AF1)
+#define GPIO9_CHOUT_0		MFP_CFG_OUT(GPIO9,  AF3, DRIVE_LOW)
+#define GPIO10_CHOUT_1		MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
+#define GPIO11_CHOUT_0		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO12_CHOUT_1		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO20_nSDCS_2		MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
+#define GPIO21_nSDCS_3		MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
+#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO21_DVAL_0		MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
+#define GPIO116_DVAL_0		MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
+#define GPIO33_DVAL_1		MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
+#define GPIO96_DVAL_1		MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
+#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
+#define GPIO115_DREQ_0		MFP_CFG_IN(GPIO115, AF1)
+#define GPIO80_DREQ_1		MFP_CFG_IN(GPIO80, AF1)
+#define GPIO97_DREQ_1		MFP_CFG_IN(GPIO97, AF2)
+#define GPIO85_DREQ_2		MFP_CFG_IN(GPIO85, AF2)
+#define GPIO100_DREQ_2		MFP_CFG_IN(GPIO100, AF2)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO20_MBREQ		MFP_CFG_IN(GPIO20, AF2)
+#define GPIO80_MBREQ		MFP_CFG_IN(GPIO80, AF2)
+#define GPIO96_MBREQ		MFP_CFG_IN(GPIO96, AF2)
+#define GPIO115_MBREQ		MFP_CFG_IN(GPIO115, AF3)
+#define GPIO21_MBGNT		MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
+#define GPIO33_MBGNT		MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
+#define GPIO97_MBGNT		MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
+#define GPIO116_MBGNT		MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
+
+/* PC CARD */
+#define GPIO15_nPCE_1		MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO85_nPCE_1		MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
+#define GPIO86_nPCE_1		MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
+#define GPIO102_nPCE_1		MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
+#define GPIO54_nPCE_2		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+#define GPIO78_nPCE_2		MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
+#define GPIO87_nPCE_2		MFP_CFG_IN(GPIO87, AF1)
+#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
+#define GPIO79_PSKTSEL		MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL		MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
+
+/* I2C */
+#define GPIO117_I2C_SCL		MFP_CFG_IN(GPIO117, AF1)
+#define GPIO118_I2C_SDA		MFP_CFG_IN(GPIO118, AF1)
+
+/* FFUART */
+#define GPIO9_FFUART_CTS	MFP_CFG_IN(GPIO9, AF3)
+#define GPIO26_FFUART_CTS	MFP_CFG_IN(GPIO26, AF3)
+#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
+#define GPIO100_FFUART_CTS	MFP_CFG_IN(GPIO100, AF3)
+#define GPIO10_FFUART_DCD	MFP_CFG_IN(GPIO10, AF1)
+#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
+#define GPIO33_FFUART_DSR	MFP_CFG_IN(GPIO33, AF2)
+#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
+#define GPIO89_FFUART_RI	MFP_CFG_IN(GPIO89, AF3)
+#define GPIO19_FFUART_RXD	MFP_CFG_IN(GPIO19, AF3)
+#define GPIO33_FFUART_RXD	MFP_CFG_IN(GPIO33, AF1)
+#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
+#define GPIO41_FFUART_RXD	MFP_CFG_IN(GPIO41, AF1)
+#define GPIO53_FFUART_RXD	MFP_CFG_IN(GPIO53, AF1)
+#define GPIO85_FFUART_RXD	MFP_CFG_IN(GPIO85, AF1)
+#define GPIO96_FFUART_RXD	MFP_CFG_IN(GPIO96, AF3)
+#define GPIO102_FFUART_RXD	MFP_CFG_IN(GPIO102, AF3)
+#define GPIO16_FFUART_TXD	MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
+#define GPIO37_FFUART_TXD	MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
+#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_TXD	MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO99_FFUART_TXD	MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
+#define GPIO27_FFUART_RTS	MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_RTS	MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
+#define GPIO98_FFUART_RTS	MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO82_FFUART_DTR	MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
+#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
+#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+#define GPIO45_BTUART_RTS_LPM_LOW	MFP_CFG_OUT(GPIO45, AF2, DRIVE_LOW)
+#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+#define GPIO43_BTUART_TXD_LPM_LOW	MFP_CFG_OUT(GPIO43, AF2, DRIVE_LOW)
+
+/* STUART */
+#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO42_FICP_RXD		MFP_CFG_IN(GPIO42, AF2)
+#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
+#define GPIO43_FICP_TXD		MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
+#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1/2/3 */
+#define GPIO11_PWM2_OUT		MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
+#define GPIO12_PWM3_OUT		MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
+#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+#define GPIO38_PWM1_OUT		MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
+#define GPIO46_PWM2_OUT		MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
+#define GPIO47_PWM3_OUT		MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
+#define GPIO79_PWM2_OUT		MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
+#define GPIO80_PWM3_OUT		MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
+#define GPIO115_PWM1_OUT	MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO94_AC97_SYNC	MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
+#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO93_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
+#define GPIO45_AC97_SYSCLK	MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
+#define GPIO89_AC97_SYSCLK	MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
+#define GPIO98_AC97_SYSCLK	MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
+#define GPIO95_AC97_nRESET	MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
+#define GPIO113_AC97_nRESET	MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
+#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
+#define GPIO116_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO116, AF2)
+#define GPIO99_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO99, AF2)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO113_I2S_SYSCLK	MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK_IN	MFP_CFG_IN(GPIO23, AF2)
+#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO29_SSP1_SCLK	MFP_CFG_IN(GPIO29, AF3)
+#define GPIO27_SSP1_SYSCLK	MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
+#define GPIO53_SSP1_SYSCLK	MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM	MFP_CFG_IN(GPIO24, AF2)
+#define GPIO28_SSP1_SFRM	MFP_CFG_IN(GPIO28, AF3)
+#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO57_SSP1_TXD		MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
+#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_SCLKEN	MFP_CFG_IN(GPIO27, AF2)
+
+/* SSP 2 */
+#define GPIO19_SSP2_SCLK	MFP_CFG_IN(GPIO19, AF1)
+#define GPIO22_SSP2_SCLK	MFP_CFG_IN(GPIO22, AF3)
+#define GPIO29_SSP2_SCLK	MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
+#define GPIO36_SSP2_SCLK	MFP_CFG_IN(GPIO36, AF2)
+#define GPIO50_SSP2_SCLK	MFP_CFG_IN(GPIO50, AF3)
+#define GPIO22_SSP2_SYSCLK	MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
+#define GPIO14_SSP2_SFRM	MFP_CFG_IN(GPIO14, AF2)
+#define GPIO37_SSP2_SFRM	MFP_CFG_IN(GPIO37, AF2)
+#define GPIO87_SSP2_SFRM	MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
+#define GPIO88_SSP2_SFRM	MFP_CFG_IN(GPIO88, AF3)
+#define GPIO13_SSP2_TXD		MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
+#define GPIO38_SSP2_TXD		MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
+#define GPIO87_SSP2_TXD		MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
+#define GPIO89_SSP2_TXD		MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
+#define GPIO11_SSP2_RXD		MFP_CFG_IN(GPIO11, AF2)
+#define GPIO29_SSP2_RXD		MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
+#define GPIO40_SSP2_RXD		MFP_CFG_IN(GPIO40, AF1)
+#define GPIO86_SSP2_RXD		MFP_CFG_IN(GPIO86, AF1)
+#define GPIO88_SSP2_RXD		MFP_CFG_IN(GPIO88, AF2)
+#define GPIO22_SSP2_EXTCLK	MFP_CFG_IN(GPIO22, AF1)
+#define GPIO27_SSP2_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
+#define GPIO22_SSP2_SCLKEN	MFP_CFG_IN(GPIO22, AF2)
+#define GPIO23_SSP2_SCLKEN	MFP_CFG_IN(GPIO23, AF2)
+
+/* SSP 3 */
+#define GPIO34_SSP3_SCLK	MFP_CFG_IN(GPIO34, AF3)
+#define GPIO40_SSP3_SCLK	MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
+#define GPIO52_SSP3_SCLK	MFP_CFG_IN(GPIO52, AF2)
+#define GPIO84_SSP3_SCLK	MFP_CFG_IN(GPIO84, AF1)
+#define GPIO45_SSP3_SYSCLK	MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
+#define GPIO35_SSP3_SFRM	MFP_CFG_IN(GPIO35, AF3)
+#define GPIO39_SSP3_SFRM	MFP_CFG_IN(GPIO39, AF3)
+#define GPIO83_SSP3_SFRM	MFP_CFG_IN(GPIO83, AF1)
+#define GPIO35_SSP3_TXD		MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
+#define GPIO38_SSP3_TXD		MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
+#define GPIO81_SSP3_TXD		MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO41_SSP3_RXD		MFP_CFG_IN(GPIO41, AF3)
+#define GPIO82_SSP3_RXD		MFP_CFG_IN(GPIO82, AF1)
+#define GPIO89_SSP3_RXD		MFP_CFG_IN(GPIO89, AF1)
+
+/* MMC */
+#define GPIO32_MMC_CLK		MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
+#define GPIO92_MMC_DAT_0	MFP_CFG_IN(GPIO92, AF1)
+#define GPIO109_MMC_DAT_1	MFP_CFG_IN(GPIO109, AF1)
+#define GPIO110_MMC_DAT_2	MFP_CFG_IN(GPIO110, AF1)
+#define GPIO111_MMC_DAT_3	MFP_CFG_IN(GPIO111, AF1)
+#define GPIO112_MMC_CMD		MFP_CFG_IN(GPIO112, AF1)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO86_LCD_LDD_16	MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
+#define GPIO87_LCD_LDD_17	MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO14_LCD_VSYNC	MFP_CFG_IN(GPIO14, AF1)
+#define GPIO19_LCD_CS		MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
+
+/* Keypad */
+#define GPIO93_KP_DKIN_0	MFP_CFG_IN(GPIO93, AF1)
+#define GPIO94_KP_DKIN_1	MFP_CFG_IN(GPIO94, AF1)
+#define GPIO95_KP_DKIN_2	MFP_CFG_IN(GPIO95, AF1)
+#define GPIO96_KP_DKIN_3	MFP_CFG_IN(GPIO96, AF1)
+#define GPIO97_KP_DKIN_4	MFP_CFG_IN(GPIO97, AF1)
+#define GPIO98_KP_DKIN_5	MFP_CFG_IN(GPIO98, AF1)
+#define GPIO99_KP_DKIN_6	MFP_CFG_IN(GPIO99, AF1)
+#define GPIO13_KP_KDIN_7	MFP_CFG_IN(GPIO13, AF2)
+#define GPIO100_KP_MKIN_0	MFP_CFG_IN(GPIO100, AF1)
+#define GPIO101_KP_MKIN_1	MFP_CFG_IN(GPIO101, AF1)
+#define GPIO102_KP_MKIN_2	MFP_CFG_IN(GPIO102, AF1)
+#define GPIO34_KP_MKIN_3	MFP_CFG_IN(GPIO34, AF2)
+#define GPIO37_KP_MKIN_3	MFP_CFG_IN(GPIO37, AF3)
+#define GPIO97_KP_MKIN_3	MFP_CFG_IN(GPIO97, AF3)
+#define GPIO98_KP_MKIN_4	MFP_CFG_IN(GPIO98, AF3)
+#define GPIO38_KP_MKIN_4	MFP_CFG_IN(GPIO38, AF2)
+#define GPIO39_KP_MKIN_4	MFP_CFG_IN(GPIO39, AF1)
+#define GPIO16_KP_MKIN_5	MFP_CFG_IN(GPIO16, AF1)
+#define GPIO90_KP_MKIN_5	MFP_CFG_IN(GPIO90, AF1)
+#define GPIO99_KP_MKIN_5	MFP_CFG_IN(GPIO99, AF3)
+#define GPIO17_KP_MKIN_6	MFP_CFG_IN(GPIO17, AF1)
+#define GPIO91_KP_MKIN_6	MFP_CFG_IN(GPIO91, AF1)
+#define GPIO95_KP_MKIN_6	MFP_CFG_IN(GPIO95, AF3)
+#define GPIO13_KP_MKIN_7	MFP_CFG_IN(GPIO13, AF3)
+#define GPIO36_KP_MKIN_7	MFP_CFG_IN(GPIO36, AF3)
+#define GPIO103_KP_MKOUT_0	MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_1	MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_2	MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
+#define GPIO106_KP_MKOUT_3	MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
+#define GPIO107_KP_MKOUT_4	MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
+#define GPIO108_KP_MKOUT_5	MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
+#define GPIO35_KP_MKOUT_6	MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
+#define GPIO22_KP_MKOUT_7	MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
+#define GPIO40_KP_MKOUT_6	MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
+#define GPIO41_KP_MKOUT_7	MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
+#define GPIO96_KP_MKOUT_6	MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
+
+/* USB P3 */
+#define GPIO10_USB_P3_5		MFP_CFG_IN(GPIO10, AF3)
+#define GPIO11_USB_P3_1		MFP_CFG_IN(GPIO11, AF3)
+#define GPIO30_USB_P3_2		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_USB_P3_6		MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#define GPIO56_USB_P3_4		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO86_USB_P3_5		MFP_CFG_IN(GPIO86, AF3)
+#define GPIO87_USB_P3_1		MFP_CFG_IN(GPIO87, AF3)
+#define GPIO90_USB_P3_5		MFP_CFG_IN(GPIO90, AF2)
+#define GPIO91_USB_P3_1		MFP_CFG_IN(GPIO91, AF2)
+#define GPIO113_USB_P3_3	MFP_CFG_IN(GPIO113, AF3)
+
+/* USB P2 */
+#define GPIO34_USB_P2_2		MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
+#define GPIO35_USB_P2_1		MFP_CFG_IN(GPIO35, AF2)
+#define GPIO36_USB_P2_4		MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
+#define GPIO37_USB_P2_8		MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
+#define GPIO38_USB_P2_3		MFP_CFG_IN(GPIO38, AF3)
+#define GPIO39_USB_P2_6		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO40_USB_P2_5		MFP_CFG_IN(GPIO40, AF3)
+#define GPIO41_USB_P2_7		MFP_CFG_IN(GPIO41, AF2)
+#define GPIO53_USB_P2_3		MFP_CFG_IN(GPIO53, AF2)
+
+/* USB Host Port 1/2 */
+#define GPIO88_USBH1_PWR	MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_USBH1_PEN	MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
+#define GPIO119_USBH2_PWR	MFP_CFG_IN(GPIO119, AF1)
+#define GPIO120_USBH2_PEN	MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
+
+/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
+#define GPIO115_CIF_DD_3	MFP_CFG_IN(GPIO115, AF2)
+#define GPIO116_CIF_DD_2	MFP_CFG_IN(GPIO116, AF1)
+#define GPIO12_CIF_DD_7		MFP_CFG_IN(GPIO12, AF2)
+#define GPIO17_CIF_DD_6		MFP_CFG_IN(GPIO17, AF2)
+#define GPIO23_CIF_MCLK		MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
+#define GPIO24_CIF_FV		MFP_CFG_IN(GPIO24, AF1)
+#define GPIO25_CIF_LV		MFP_CFG_IN(GPIO25, AF1)
+#define GPIO26_CIF_PCLK		MFP_CFG_IN(GPIO26, AF2)
+#define GPIO27_CIF_DD_0		MFP_CFG_IN(GPIO27, AF3)
+#define GPIO42_CIF_MCLK		MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
+#define GPIO43_CIF_FV		MFP_CFG_IN(GPIO43, AF3)
+#define GPIO44_CIF_LV		MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_CIF_PCLK		MFP_CFG_IN(GPIO45, AF3)
+#define GPIO47_CIF_DD_0		MFP_CFG_IN(GPIO47, AF1)
+#define GPIO48_CIF_DD_5		MFP_CFG_IN(GPIO48, AF1)
+#define GPIO50_CIF_DD_3		MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_CIF_DD_2		MFP_CFG_IN(GPIO51, AF1)
+#define GPIO52_CIF_DD_4		MFP_CFG_IN(GPIO52, AF1)
+#define GPIO53_CIF_MCLK		MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
+#define GPIO54_CIF_PCLK		MFP_CFG_IN(GPIO54, AF3)
+#define GPIO55_CIF_DD_1		MFP_CFG_IN(GPIO55, AF1)
+#define GPIO81_CIF_DD_0		MFP_CFG_IN(GPIO81, AF2)
+#define GPIO82_CIF_DD_5		MFP_CFG_IN(GPIO82, AF3)
+#define GPIO83_CIF_DD_4		MFP_CFG_IN(GPIO83, AF3)
+#define GPIO84_CIF_FV		MFP_CFG_IN(GPIO84, AF3)
+#define GPIO85_CIF_LV		MFP_CFG_IN(GPIO85, AF3)
+#define GPIO90_CIF_DD_4		MFP_CFG_IN(GPIO90, AF3)
+#define GPIO91_CIF_DD_5		MFP_CFG_IN(GPIO91, AF3)
+#define GPIO93_CIF_DD_6		MFP_CFG_IN(GPIO93, AF2)
+#define GPIO94_CIF_DD_5		MFP_CFG_IN(GPIO94, AF2)
+#define GPIO95_CIF_DD_4		MFP_CFG_IN(GPIO95, AF2)
+#define GPIO98_CIF_DD_0		MFP_CFG_IN(GPIO98, AF2)
+#define GPIO103_CIF_DD_3	MFP_CFG_IN(GPIO103, AF1)
+#define GPIO104_CIF_DD_2	MFP_CFG_IN(GPIO104, AF1)
+#define GPIO105_CIF_DD_1	MFP_CFG_IN(GPIO105, AF1)
+#define GPIO106_CIF_DD_9	MFP_CFG_IN(GPIO106, AF1)
+#define GPIO107_CIF_DD_8	MFP_CFG_IN(GPIO107, AF1)
+#define GPIO108_CIF_DD_7	MFP_CFG_IN(GPIO108, AF1)
+#define GPIO114_CIF_DD_1	MFP_CFG_IN(GPIO114, AF1)
+
+/* Universal Subscriber ID Interface */
+#define GPIO114_UVS0		MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
+#define GPIO115_nUVS1		MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
+#define GPIO116_nUVS2		MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
+#define GPIO14_UCLK		MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
+#define GPIO91_UCLK		MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
+#define GPIO19_nURST		MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
+#define GPIO90_nURST		MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
+#define GPIO116_UDET		MFP_CFG_IN(GPIO116, AF3)
+#define GPIO114_UEN		MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
+#define GPIO115_UEN		MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
+
+/* Mobile Scalable Link (MSL) Interface */
+#define GPIO81_BB_OB_DAT_0	MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
+#define GPIO48_BB_OB_DAT_1	MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
+#define GPIO50_BB_OB_DAT_2	MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
+#define GPIO51_BB_OB_DAT_3	MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
+#define GPIO52_BB_OB_CLK	MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
+#define GPIO53_BB_OB_STB	MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_BB_OB_WAIT	MFP_CFG_IN(GPIO54, AF2)
+#define GPIO82_BB_IB_DAT_0	MFP_CFG_IN(GPIO82, AF2)
+#define GPIO55_BB_IB_DAT_1	MFP_CFG_IN(GPIO55, AF2)
+#define GPIO56_BB_IB_DAT_2	MFP_CFG_IN(GPIO56, AF2)
+#define GPIO57_BB_IB_DAT_3	MFP_CFG_IN(GPIO57, AF2)
+#define GPIO83_BB_IB_CLK	MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_BB_IB_STB	MFP_CFG_IN(GPIO84, AF2)
+#define GPIO85_BB_IB_WAIT	MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
+
+/* Memory Stick Host Controller */
+#define GPIO92_MSBS		MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
+#define GPIO109_MSSDIO		MFP_CFG_IN(GPIO109, AF2)
+#define GPIO112_nMSINS		MFP_CFG_IN(GPIO112, AF2)
+#define GPIO32_MSSCLK		MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+/* commonly used pin configurations */
+#define GPIOxx_LCD_16BPP	\
+	GPIO58_LCD_LDD_0,	\
+	GPIO59_LCD_LDD_1,	\
+	GPIO60_LCD_LDD_2,	\
+	GPIO61_LCD_LDD_3,	\
+	GPIO62_LCD_LDD_4,	\
+	GPIO63_LCD_LDD_5,	\
+	GPIO64_LCD_LDD_6,	\
+	GPIO65_LCD_LDD_7,	\
+	GPIO66_LCD_LDD_8,	\
+	GPIO67_LCD_LDD_9,	\
+	GPIO68_LCD_LDD_10,	\
+	GPIO69_LCD_LDD_11,	\
+	GPIO70_LCD_LDD_12,	\
+	GPIO71_LCD_LDD_13,	\
+	GPIO72_LCD_LDD_14,	\
+	GPIO73_LCD_LDD_15
+
+#define GPIOxx_LCD_TFT_16BPP	\
+	GPIOxx_LCD_16BPP,	\
+	GPIO74_LCD_FCLK,	\
+	GPIO75_LCD_LCLK,	\
+	GPIO76_LCD_PCLK,	\
+	GPIO77_LCD_BIAS
+
+/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */
+#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DEFAULT)
+#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DEFAULT)
+
+extern int keypad_set_wake(unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA27X_H */

arch/arm/mach-pxa/mfp-pxa2xx.h

@@ -0,0 +1,142 @@
+#ifndef __ASM_ARCH_MFP_PXA2XX_H
+#define __ASM_ARCH_MFP_PXA2XX_H
+
+#include <plat/mfp.h>
+
+/*
+ * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
+ *
+ *  MFP_PIN(x)
+ *  MFP_AFx
+ *  MFP_LPM_DRIVE_{LOW, HIGH}
+ *  MFP_LPM_EDGE_x
+ *
+ * other MFP_x bit definitions will be ignored
+ *
+ * and adds the below two bits specifically for pxa2xx:
+ *
+ * bit     23 - Input/Output (PXA2xx specific)
+ * bit     24 - Wakeup Enable(PXA2xx specific)
+ * bit     25 - Keep Output  (PXA2xx specific)
+ */
+
+#define MFP_DIR_IN		(0x0 << 23)
+#define MFP_DIR_OUT		(0x1 << 23)
+#define MFP_DIR_MASK		(0x1 << 23)
+#define MFP_DIR(x)		(((x) >> 23) & 0x1)
+
+#define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+
+/*
+ * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to
+ * retain their last output level (low or high).
+ * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input.
+ */
+#define MFP_LPM_KEEP_OUTPUT	(0x1 << 25)
+
+#define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
+#define WAKEUP_ON_EDGE_FALL	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
+#define WAKEUP_ON_EDGE_BOTH	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
+
+/* specifically for enabling wakeup on keypad GPIOs */
+#define WAKEUP_ON_LEVEL_HIGH	(MFP_LPM_CAN_WAKEUP)
+
+#define MFP_CFG_IN(pin, af)		\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
+
+/* NOTE:  pins configured as output _must_ provide a low power state,
+ * and this state should help to minimize the power dissipation.
+ */
+#define MFP_CFG_OUT(pin, af, state)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Common configurations for pxa25x and pxa27x
+ *
+ * Note: pins configured as GPIO are always initialized to input
+ * so not to cause any side effect
+ */
+#define GPIO0_GPIO	MFP_CFG_IN(GPIO0, AF0)
+#define GPIO1_GPIO	MFP_CFG_IN(GPIO1, AF0)
+#define GPIO9_GPIO	MFP_CFG_IN(GPIO9, AF0)
+#define GPIO10_GPIO	MFP_CFG_IN(GPIO10, AF0)
+#define GPIO11_GPIO	MFP_CFG_IN(GPIO11, AF0)
+#define GPIO12_GPIO	MFP_CFG_IN(GPIO12, AF0)
+#define GPIO13_GPIO	MFP_CFG_IN(GPIO13, AF0)
+#define GPIO14_GPIO	MFP_CFG_IN(GPIO14, AF0)
+#define GPIO15_GPIO	MFP_CFG_IN(GPIO15, AF0)
+#define GPIO16_GPIO	MFP_CFG_IN(GPIO16, AF0)
+#define GPIO17_GPIO	MFP_CFG_IN(GPIO17, AF0)
+#define GPIO18_GPIO	MFP_CFG_IN(GPIO18, AF0)
+#define GPIO19_GPIO	MFP_CFG_IN(GPIO19, AF0)
+#define GPIO20_GPIO	MFP_CFG_IN(GPIO20, AF0)
+#define GPIO21_GPIO	MFP_CFG_IN(GPIO21, AF0)
+#define GPIO22_GPIO	MFP_CFG_IN(GPIO22, AF0)
+#define GPIO23_GPIO	MFP_CFG_IN(GPIO23, AF0)
+#define GPIO24_GPIO	MFP_CFG_IN(GPIO24, AF0)
+#define GPIO25_GPIO	MFP_CFG_IN(GPIO25, AF0)
+#define GPIO26_GPIO	MFP_CFG_IN(GPIO26, AF0)
+#define GPIO27_GPIO	MFP_CFG_IN(GPIO27, AF0)
+#define GPIO28_GPIO	MFP_CFG_IN(GPIO28, AF0)
+#define GPIO29_GPIO	MFP_CFG_IN(GPIO29, AF0)
+#define GPIO30_GPIO	MFP_CFG_IN(GPIO30, AF0)
+#define GPIO31_GPIO	MFP_CFG_IN(GPIO31, AF0)
+#define GPIO32_GPIO	MFP_CFG_IN(GPIO32, AF0)
+#define GPIO33_GPIO	MFP_CFG_IN(GPIO33, AF0)
+#define GPIO34_GPIO	MFP_CFG_IN(GPIO34, AF0)
+#define GPIO35_GPIO	MFP_CFG_IN(GPIO35, AF0)
+#define GPIO36_GPIO	MFP_CFG_IN(GPIO36, AF0)
+#define GPIO37_GPIO	MFP_CFG_IN(GPIO37, AF0)
+#define GPIO38_GPIO	MFP_CFG_IN(GPIO38, AF0)
+#define GPIO39_GPIO	MFP_CFG_IN(GPIO39, AF0)
+#define GPIO40_GPIO	MFP_CFG_IN(GPIO40, AF0)
+#define GPIO41_GPIO	MFP_CFG_IN(GPIO41, AF0)
+#define GPIO42_GPIO	MFP_CFG_IN(GPIO42, AF0)
+#define GPIO43_GPIO	MFP_CFG_IN(GPIO43, AF0)
+#define GPIO44_GPIO	MFP_CFG_IN(GPIO44, AF0)
+#define GPIO45_GPIO	MFP_CFG_IN(GPIO45, AF0)
+#define GPIO46_GPIO	MFP_CFG_IN(GPIO46, AF0)
+#define GPIO47_GPIO	MFP_CFG_IN(GPIO47, AF0)
+#define GPIO48_GPIO	MFP_CFG_IN(GPIO48, AF0)
+#define GPIO49_GPIO	MFP_CFG_IN(GPIO49, AF0)
+#define GPIO50_GPIO	MFP_CFG_IN(GPIO50, AF0)
+#define GPIO51_GPIO	MFP_CFG_IN(GPIO51, AF0)
+#define GPIO52_GPIO	MFP_CFG_IN(GPIO52, AF0)
+#define GPIO53_GPIO	MFP_CFG_IN(GPIO53, AF0)
+#define GPIO54_GPIO	MFP_CFG_IN(GPIO54, AF0)
+#define GPIO55_GPIO	MFP_CFG_IN(GPIO55, AF0)
+#define GPIO56_GPIO	MFP_CFG_IN(GPIO56, AF0)
+#define GPIO57_GPIO	MFP_CFG_IN(GPIO57, AF0)
+#define GPIO58_GPIO	MFP_CFG_IN(GPIO58, AF0)
+#define GPIO59_GPIO	MFP_CFG_IN(GPIO59, AF0)
+#define GPIO60_GPIO	MFP_CFG_IN(GPIO60, AF0)
+#define GPIO61_GPIO	MFP_CFG_IN(GPIO61, AF0)
+#define GPIO62_GPIO	MFP_CFG_IN(GPIO62, AF0)
+#define GPIO63_GPIO	MFP_CFG_IN(GPIO63, AF0)
+#define GPIO64_GPIO	MFP_CFG_IN(GPIO64, AF0)
+#define GPIO65_GPIO	MFP_CFG_IN(GPIO65, AF0)
+#define GPIO66_GPIO	MFP_CFG_IN(GPIO66, AF0)
+#define GPIO67_GPIO	MFP_CFG_IN(GPIO67, AF0)
+#define GPIO68_GPIO	MFP_CFG_IN(GPIO68, AF0)
+#define GPIO69_GPIO	MFP_CFG_IN(GPIO69, AF0)
+#define GPIO70_GPIO	MFP_CFG_IN(GPIO70, AF0)
+#define GPIO71_GPIO	MFP_CFG_IN(GPIO71, AF0)
+#define GPIO72_GPIO	MFP_CFG_IN(GPIO72, AF0)
+#define GPIO73_GPIO	MFP_CFG_IN(GPIO73, AF0)
+#define GPIO74_GPIO	MFP_CFG_IN(GPIO74, AF0)
+#define GPIO75_GPIO	MFP_CFG_IN(GPIO75, AF0)
+#define GPIO76_GPIO	MFP_CFG_IN(GPIO76, AF0)
+#define GPIO77_GPIO	MFP_CFG_IN(GPIO77, AF0)
+#define GPIO78_GPIO	MFP_CFG_IN(GPIO78, AF0)
+#define GPIO79_GPIO	MFP_CFG_IN(GPIO79, AF0)
+#define GPIO80_GPIO	MFP_CFG_IN(GPIO80, AF0)
+#define GPIO81_GPIO	MFP_CFG_IN(GPIO81, AF0)
+#define GPIO82_GPIO	MFP_CFG_IN(GPIO82, AF0)
+#define GPIO83_GPIO	MFP_CFG_IN(GPIO83, AF0)
+#define GPIO84_GPIO	MFP_CFG_IN(GPIO84, AF0)
+
+extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
+extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
+extern int gpio_set_wake(unsigned int gpio, unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA2XX_H */

arch/arm/mach-pxa/mfp-pxa320.h

@@ -0,0 +1,461 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+ *
+ * PXA320 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA320_H
+#define __ASM_ARCH_MFP_PXA320_H
+
+#include "mfp-pxa3xx.h"
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+
+#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
+#define GPIO13_2_GPIO		MFP_CFG(GPIO13_2, AF0)
+#define GPIO14_2_GPIO		MFP_CFG(GPIO14_2, AF0)
+#define GPIO15_2_GPIO		MFP_CFG(GPIO15_2, AF0)
+#define GPIO16_2_GPIO		MFP_CFG(GPIO16_2, AF0)
+#define GPIO17_2_GPIO		MFP_CFG(GPIO17_2, AF0)
+
+/* Chip Select */
+#define GPIO3_nCS2		MFP_CFG(GPIO3, AF1)
+#define GPIO4_nCS3		MFP_CFG(GPIO4, AF1)
+
+/* AC97 */
+#define GPIO34_AC97_SYSCLK	MFP_CFG(GPIO34, AF1)
+#define GPIO39_AC97_BITCLK	MFP_CFG(GPIO39, AF1)
+#define GPIO40_AC97_nACRESET	MFP_CFG(GPIO40, AF1)
+#define GPIO35_AC97_SDATA_IN_0	MFP_CFG(GPIO35, AF1)
+#define GPIO36_AC97_SDATA_IN_1	MFP_CFG(GPIO36, AF1)
+#define GPIO32_AC97_SDATA_IN_2	MFP_CFG(GPIO32, AF2)
+#define GPIO33_AC97_SDATA_IN_3	MFP_CFG(GPIO33, AF2)
+#define GPIO11_AC97_SDATA_IN_2	MFP_CFG(GPIO11, AF3)
+#define GPIO12_AC97_SDATA_IN_3	MFP_CFG(GPIO12, AF3)
+#define GPIO37_AC97_SDATA_OUT	MFP_CFG(GPIO37, AF1)
+#define GPIO38_AC97_SYNC	MFP_CFG(GPIO38, AF1)
+
+/* I2C */
+#define GPIO32_I2C_SCL		MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
+#define GPIO33_I2C_SDA		MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO49_CI_DD_0		MFP_CFG_DRV(GPIO49, AF1, DS04X)
+#define GPIO50_CI_DD_1		MFP_CFG_DRV(GPIO50, AF1, DS04X)
+#define GPIO51_CI_DD_2		MFP_CFG_DRV(GPIO51, AF1, DS04X)
+#define GPIO52_CI_DD_3		MFP_CFG_DRV(GPIO52, AF1, DS04X)
+#define GPIO53_CI_DD_4		MFP_CFG_DRV(GPIO53, AF1, DS04X)
+#define GPIO54_CI_DD_5		MFP_CFG_DRV(GPIO54, AF1, DS04X)
+#define GPIO55_CI_DD_6		MFP_CFG_DRV(GPIO55, AF1, DS04X)
+#define GPIO56_CI_DD_7		MFP_CFG_DRV(GPIO56, AF0, DS04X)
+#define GPIO57_CI_DD_8		MFP_CFG_DRV(GPIO57, AF1, DS04X)
+#define GPIO58_CI_DD_9		MFP_CFG_DRV(GPIO58, AF1, DS04X)
+#define GPIO59_CI_MCLK		MFP_CFG_DRV(GPIO59, AF0, DS04X)
+#define GPIO60_CI_PCLK		MFP_CFG_DRV(GPIO60, AF0, DS04X)
+#define GPIO61_CI_HSYNC		MFP_CFG_DRV(GPIO61, AF0, DS04X)
+#define GPIO62_CI_VSYNC		MFP_CFG_DRV(GPIO62, AF0, DS04X)
+
+#define GPIO31_CIR_OUT		MFP_CFG(GPIO31, AF5)
+
+#define GPIO0_2_CLK_EXT		MFP_CFG(GPIO0_2, AF3)
+#define GPIO0_DRQ		MFP_CFG(GPIO0, AF2)
+#define GPIO11_EXT_SYNC0	MFP_CFG(GPIO11, AF5)
+#define GPIO12_EXT_SYNC1	MFP_CFG(GPIO12, AF6)
+#define GPIO0_2_HZ_CLK		MFP_CFG(GPIO0_2, AF1)
+#define GPIO14_HZ_CLK		MFP_CFG(GPIO14, AF4)
+#define GPIO30_ICP_RXD		MFP_CFG(GPIO30, AF1)
+#define GPIO31_ICP_TXD		MFP_CFG(GPIO31, AF1)
+
+#define GPIO83_KP_DKIN_0	MFP_CFG_LPM(GPIO83, AF3, FLOAT)
+#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84, AF3, FLOAT)
+#define GPIO85_KP_DKIN_2	MFP_CFG_LPM(GPIO85, AF3, FLOAT)
+#define GPIO86_KP_DKIN_3	MFP_CFG_LPM(GPIO86, AF3, FLOAT)
+
+#define GPIO105_KP_DKIN_0	MFP_CFG_LPM(GPIO105, AF2, FLOAT)
+#define GPIO106_KP_DKIN_1	MFP_CFG_LPM(GPIO106, AF2, FLOAT)
+#define GPIO107_KP_DKIN_2	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_3	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_4	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_5	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_6	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_7	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+
+#define GPIO113_KP_DKIN_0	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_1	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_2	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_3	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_4	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_5	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_6	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_7	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+
+#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF2, FLOAT)
+#define GPIO126_KP_DKIN_1	MFP_CFG_LPM(GPIO126, AF2, FLOAT)
+
+#define GPIO2_2_KP_DKIN_0	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_1	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO125_KP_DKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_7	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+
+#define GPIO113_KP_MKIN_0	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+#define GPIO114_KP_MKIN_1	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+#define GPIO115_KP_MKIN_2	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_3	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_4	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_5	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_6	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_7	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+
+#define GPIO83_KP_MKOUT_0	MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO84_KP_MKOUT_1	MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_2	MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_3	MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_4	MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
+#define GPIO14_KP_MKOUT_5	MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
+
+#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_5	MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
+#define GPIO127_KP_MKOUT_6	MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO6_2_LCD_LDD_0	MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
+#define GPIO7_2_LCD_LDD_1	MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
+#define GPIO8_2_LCD_LDD_2	MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
+#define GPIO9_2_LCD_LDD_3	MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
+#define GPIO10_2_LCD_LDD_4	MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
+#define GPIO11_2_LCD_LDD_5	MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
+#define GPIO12_2_LCD_LDD_6	MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
+#define GPIO13_2_LCD_LDD_7	MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
+#define GPIO63_LCD_LDD_8	MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_9	MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_10	MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_11	MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_12	MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_13	MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_14	MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_15	MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_16	MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO72_LCD_LDD_17	MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_CS_N		MFP_CFG_DRV(GPIO73, AF2, DS01X)
+#define GPIO74_LCD_VSYNC	MFP_CFG_DRV(GPIO74, AF2, DS01X)
+#define GPIO14_2_LCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
+#define GPIO15_2_LCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
+#define GPIO16_2_LCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
+#define GPIO17_2_LCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
+#define GPIO64_LCD_VSYNC	MFP_CFG_DRV(GPIO64, AF2, DS01X)
+#define GPIO63_LCD_CS_N		MFP_CFG_DRV(GPIO63, AF2, DS01X)
+
+#define GPIO6_2_MLCD_DD_0	MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
+#define GPIO7_2_MLCD_DD_1	MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
+#define GPIO8_2_MLCD_DD_2	MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
+#define GPIO9_2_MLCD_DD_3	MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
+#define GPIO10_2_MLCD_DD_4	MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
+#define GPIO11_2_MLCD_DD_5	MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
+#define GPIO12_2_MLCD_DD_6	MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
+#define GPIO13_2_MLCD_DD_7	MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
+#define GPIO63_MLCD_DD_8	MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_DD_9	MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_DD_10	MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_DD_11	MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_DD_12	MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_DD_13	MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_DD_14	MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO70_MLCD_DD_15	MFP_CFG_DRV(GPIO70, AF7, DS08X)
+#define GPIO71_MLCD_DD_16	MFP_CFG_DRV(GPIO71, AF7, DS08X)
+#define GPIO72_MLCD_DD_17	MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_CS		MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO74_MLCD_VSYNC	MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO14_2_MLCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
+#define GPIO15_2_MLCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
+#define GPIO16_2_MLCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
+#define GPIO17_2_MLCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
+
+/* MMC1 */
+#define GPIO9_MMC1_CMD		MFP_CFG_LPM(GPIO9,  AF4, DRIVE_HIGH)
+#define GPIO22_MMC1_CLK		MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
+#define GPIO23_MMC1_CMD		MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
+#define GPIO30_MMC1_CLK		MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
+#define GPIO31_MMC1_CMD		MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT0		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT1		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
+#define GPIO7_MMC1_DAT2		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_DAT3		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
+#define GPIO18_MMC1_DAT0	MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
+#define GPIO19_MMC1_DAT1	MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
+#define GPIO20_MMC1_DAT2	MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
+#define GPIO21_MMC1_DAT3	MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
+
+#define GPIO28_MMC2_CLK		MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
+#define GPIO29_MMC2_CMD		MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
+#define GPIO30_MMC2_CLK		MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
+#define GPIO31_MMC2_CMD		MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
+#define GPIO79_MMC2_CLK		MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_CMD		MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+
+#define GPIO5_MMC2_DAT0		MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
+#define GPIO6_MMC2_DAT1		MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
+#define GPIO7_MMC2_DAT2		MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
+#define GPIO8_MMC2_DAT3		MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
+#define GPIO24_MMC2_DAT0	MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
+#define GPIO75_MMC2_DAT0	MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
+#define GPIO25_MMC2_DAT1	MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
+#define GPIO76_MMC2_DAT1	MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
+#define GPIO26_MMC2_DAT2	MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT2	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO27_MMC2_DAT3	MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT3	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+
+/* 1-Wire */
+#define GPIO14_ONE_WIRE		MFP_CFG_LPM(GPIO14,  AF5, FLOAT)
+#define GPIO0_2_ONE_WIRE	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+
+/* SSP1 */
+#define GPIO87_SSP1_EXTCLK	MFP_CFG(GPIO87, AF1)
+#define GPIO88_SSP1_SYSCLK	MFP_CFG(GPIO88, AF1)
+#define GPIO83_SSP1_SCLK	MFP_CFG(GPIO83, AF1)
+#define GPIO84_SSP1_SFRM	MFP_CFG(GPIO84, AF1)
+#define GPIO85_SSP1_RXD		MFP_CFG(GPIO85, AF6)
+#define GPIO85_SSP1_TXD		MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_RXD		MFP_CFG(GPIO86, AF1)
+#define GPIO86_SSP1_TXD		MFP_CFG(GPIO86, AF6)
+
+/* SSP2 */
+#define GPIO39_SSP2_EXTCLK	MFP_CFG(GPIO39, AF2)
+#define GPIO40_SSP2_SYSCLK	MFP_CFG(GPIO40, AF2)
+#define GPIO12_SSP2_SCLK	MFP_CFG(GPIO12, AF2)
+#define GPIO35_SSP2_SCLK	MFP_CFG(GPIO35, AF2)
+#define GPIO36_SSP2_SFRM	MFP_CFG(GPIO36, AF2)
+#define GPIO37_SSP2_RXD		MFP_CFG(GPIO37, AF5)
+#define GPIO37_SSP2_TXD		MFP_CFG(GPIO37, AF2)
+#define GPIO38_SSP2_RXD		MFP_CFG(GPIO38, AF2)
+#define GPIO38_SSP2_TXD		MFP_CFG(GPIO38, AF5)
+
+#define GPIO69_SSP3_SCLK	MFP_CFG_X(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK	MFP_CFG_X(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM		MFP_CFG_X(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
+#define GPIO72_SSP3_RXD		MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
+#define GPIO72_SSP3_TXD		MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_RXD		MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
+#define GPIO91_SSP3_TXD		MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
+#define GPIO92_SSP3_RXD		MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
+#define GPIO92_SSP3_TXD		MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
+
+#define GPIO93_SSP4_SCLK	MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
+#define GPIO94_SSP4_FRM		MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
+#define GPIO94_SSP4_RXD		MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
+#define GPIO95_SSP4_RXD		MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
+#define GPIO95_SSP4_TXD		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_RXD		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO96_SSP4_TXD		MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
+
+/* UART1 */
+#define GPIO41_UART1_RXD	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+#define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO75_UART1_RXD	MFP_CFG_LPM(GPIO75, AF1, FLOAT)
+#define GPIO76_UART1_RXD	MFP_CFG_LPM(GPIO76, AF3, FLOAT)
+#define GPIO76_UART1_TXD	MFP_CFG_LPM(GPIO76, AF1, FLOAT)
+#define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
+#define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
+#define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
+#define GPIO98_UART1_TXD	MFP_CFG_LPM(GPIO98, AF1, FLOAT)
+#define GPIO43_UART1_CTS	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
+#define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
+#define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO77_UART1_CTS	MFP_CFG_LPM(GPIO77, AF1, FLOAT)
+#define GPIO82_UART1_RTS	MFP_CFG_LPM(GPIO82, AF1, FLOAT)
+#define GPIO82_UART1_CTS	MFP_CFG_LPM(GPIO82, AF3, FLOAT)
+#define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
+#define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
+#define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
+#define GPIO104_UART1_RTS	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+#define GPIO45_UART1_DTR	MFP_CFG_LPM(GPIO45, AF4, FLOAT)
+#define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
+#define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
+#define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO79_UART1_DSR	MFP_CFG_LPM(GPIO79, AF1, FLOAT)
+#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81, AF1, FLOAT)
+#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81, AF3, FLOAT)
+#define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO78_UART1_DCD	MFP_CFG_LPM(GPIO78, AF1, FLOAT)
+#define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO80_UART1_RI		MFP_CFG_LPM(GPIO80, AF1, FLOAT)
+#define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+/* UART2 */
+#define GPIO109_UART2_CTS	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO109_UART2_RTS	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO112_UART2_CTS	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO112_UART2_RTS	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO110_UART2_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+#define GPIO110_UART2_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+#define GPIO111_UART2_RXD	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO111_UART2_TXD	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO89_UART3_CTS	MFP_CFG_LPM(GPIO89, AF2, FLOAT)
+#define GPIO89_UART3_RTS	MFP_CFG_LPM(GPIO89, AF4, FLOAT)
+#define GPIO90_UART3_CTS	MFP_CFG_LPM(GPIO90, AF4, FLOAT)
+#define GPIO90_UART3_RTS	MFP_CFG_LPM(GPIO90, AF2, FLOAT)
+#define GPIO105_UART3_CTS	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+#define GPIO105_UART3_RTS	MFP_CFG_LPM(GPIO105, AF3, FLOAT)
+#define GPIO106_UART3_CTS	MFP_CFG_LPM(GPIO106, AF3, FLOAT)
+#define GPIO106_UART3_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+#define GPIO30_UART3_RXD	MFP_CFG_LPM(GPIO30, AF2, FLOAT)
+#define GPIO30_UART3_TXD	MFP_CFG_LPM(GPIO30, AF6, FLOAT)
+#define GPIO31_UART3_RXD	MFP_CFG_LPM(GPIO31, AF6, FLOAT)
+#define GPIO31_UART3_TXD	MFP_CFG_LPM(GPIO31, AF2, FLOAT)
+#define GPIO91_UART3_RXD	MFP_CFG_LPM(GPIO91, AF4, FLOAT)
+#define GPIO91_UART3_TXD	MFP_CFG_LPM(GPIO91, AF2, FLOAT)
+#define GPIO92_UART3_RXD	MFP_CFG_LPM(GPIO92, AF2, FLOAT)
+#define GPIO92_UART3_TXD	MFP_CFG_LPM(GPIO92, AF4, FLOAT)
+#define GPIO107_UART3_RXD	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO107_UART3_TXD	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_RXD	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+#define GPIO108_UART3_TXD	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+
+/* USB 2.0 UTMI */
+#define GPIO10_UTM_CLK		MFP_CFG(GPIO10, AF1)
+#define GPIO36_U2D_RXERROR	MFP_CFG(GPIO36, AF3)
+#define GPIO60_U2D_RXERROR	MFP_CFG(GPIO60, AF1)
+#define GPIO87_U2D_RXERROR	MFP_CFG(GPIO87, AF5)
+#define GPIO34_UTM_RXVALID	MFP_CFG(GPIO34, AF3)
+#define GPIO58_UTM_RXVALID	MFP_CFG(GPIO58, AF2)
+#define GPIO85_UTM_RXVALID	MFP_CFG(GPIO85, AF5)
+#define GPIO35_UTM_RXACTIVE	MFP_CFG(GPIO35, AF3)
+#define GPIO59_UTM_RXACTIVE	MFP_CFG(GPIO59, AF1)
+#define GPIO86_UTM_RXACTIVE	MFP_CFG(GPIO86, AF5)
+#define GPIO73_UTM_TXREADY	MFP_CFG(GPIO73, AF1)
+#define GPIO68_UTM_LINESTATE_0	MFP_CFG(GPIO68, AF3)
+#define GPIO90_UTM_LINESTATE_0	MFP_CFG(GPIO90, AF3)
+#define GPIO102_UTM_LINESTATE_0	MFP_CFG(GPIO102, AF3)
+#define GPIO107_UTM_LINESTATE_0	MFP_CFG(GPIO107, AF4)
+#define GPIO69_UTM_LINESTATE_1	MFP_CFG(GPIO69, AF3)
+#define GPIO91_UTM_LINESTATE_1	MFP_CFG(GPIO91, AF3)
+#define GPIO103_UTM_LINESTATE_1	MFP_CFG(GPIO103, AF3)
+
+#define GPIO41_U2D_PHYDATA_0	MFP_CFG(GPIO41, AF3)
+#define GPIO42_U2D_PHYDATA_1	MFP_CFG(GPIO42, AF3)
+#define GPIO43_U2D_PHYDATA_2	MFP_CFG(GPIO43, AF3)
+#define GPIO44_U2D_PHYDATA_3	MFP_CFG(GPIO44, AF3)
+#define GPIO45_U2D_PHYDATA_4	MFP_CFG(GPIO45, AF3)
+#define GPIO46_U2D_PHYDATA_5	MFP_CFG(GPIO46, AF3)
+#define GPIO47_U2D_PHYDATA_6	MFP_CFG(GPIO47, AF3)
+#define GPIO48_U2D_PHYDATA_7	MFP_CFG(GPIO48, AF3)
+
+#define GPIO49_U2D_PHYDATA_0	MFP_CFG(GPIO49, AF3)
+#define GPIO50_U2D_PHYDATA_1	MFP_CFG(GPIO50, AF3)
+#define GPIO51_U2D_PHYDATA_2	MFP_CFG(GPIO51, AF3)
+#define GPIO52_U2D_PHYDATA_3	MFP_CFG(GPIO52, AF3)
+#define GPIO53_U2D_PHYDATA_4	MFP_CFG(GPIO53, AF3)
+#define GPIO54_U2D_PHYDATA_5	MFP_CFG(GPIO54, AF3)
+#define GPIO55_U2D_PHYDATA_6	MFP_CFG(GPIO55, AF3)
+#define GPIO56_U2D_PHYDATA_7	MFP_CFG(GPIO56, AF3)
+
+#define GPIO37_U2D_OPMODE0	MFP_CFG(GPIO37, AF4)
+#define GPIO61_U2D_OPMODE0	MFP_CFG(GPIO61, AF2)
+#define GPIO88_U2D_OPMODE0	MFP_CFG(GPIO88, AF7)
+
+#define GPIO38_U2D_OPMODE1	MFP_CFG(GPIO38, AF4)
+#define GPIO62_U2D_OPMODE1	MFP_CFG(GPIO62, AF2)
+#define GPIO104_U2D_OPMODE1	MFP_CFG(GPIO104, AF4)
+#define GPIO108_U2D_OPMODE1	MFP_CFG(GPIO108, AF5)
+
+#define GPIO74_U2D_RESET	MFP_CFG(GPIO74, AF1)
+#define GPIO93_U2D_RESET	MFP_CFG(GPIO93, AF2)
+#define GPIO98_U2D_RESET	MFP_CFG(GPIO98, AF3)
+
+#define GPIO67_U2D_SUSPEND	MFP_CFG(GPIO67, AF3)
+#define GPIO96_U2D_SUSPEND	MFP_CFG(GPIO96, AF2)
+#define GPIO101_U2D_SUSPEND	MFP_CFG(GPIO101, AF3)
+
+#define GPIO66_U2D_TERM_SEL	MFP_CFG(GPIO66, AF5)
+#define GPIO95_U2D_TERM_SEL	MFP_CFG(GPIO95, AF3)
+#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97, AF7)
+#define GPIO100_U2D_TERM_SEL	MFP_CFG(GPIO100, AF5)
+
+#define GPIO39_U2D_TXVALID	MFP_CFG(GPIO39, AF4)
+#define GPIO70_U2D_TXVALID	MFP_CFG(GPIO70, AF5)
+#define GPIO83_U2D_TXVALID	MFP_CFG(GPIO83, AF7)
+
+#define GPIO65_U2D_XCVR_SEL	MFP_CFG(GPIO65, AF5)
+#define GPIO94_U2D_XCVR_SEL	MFP_CFG(GPIO94, AF3)
+#define GPIO99_U2D_XCVR_SEL	MFP_CFG(GPIO99, AF5)
+
+/* USB Host 1.1 */
+#define GPIO2_2_USBH_PEN	MFP_CFG(GPIO2_2, AF1)
+#define GPIO3_2_USBH_PWR	MFP_CFG(GPIO3_2, AF1)
+
+/* USB P2 */
+#define GPIO97_USB_P2_2		MFP_CFG(GPIO97, AF2)
+#define GPIO97_USB_P2_6		MFP_CFG(GPIO97, AF4)
+#define GPIO98_USB_P2_2		MFP_CFG(GPIO98, AF4)
+#define GPIO98_USB_P2_6		MFP_CFG(GPIO98, AF2)
+#define GPIO99_USB_P2_1		MFP_CFG(GPIO99, AF2)
+#define GPIO100_USB_P2_4	MFP_CFG(GPIO100, AF2)
+#define GPIO101_USB_P2_8	MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_3	MFP_CFG(GPIO102, AF2)
+#define GPIO103_USB_P2_5	MFP_CFG(GPIO103, AF2)
+#define GPIO104_USB_P2_7	MFP_CFG(GPIO104, AF2)
+
+/* USB P3 */
+#define GPIO75_USB_P3_1		MFP_CFG(GPIO75, AF2)
+#define GPIO76_USB_P3_2		MFP_CFG(GPIO76, AF2)
+#define GPIO77_USB_P3_3		MFP_CFG(GPIO77, AF2)
+#define GPIO78_USB_P3_4		MFP_CFG(GPIO78, AF2)
+#define GPIO79_USB_P3_5		MFP_CFG(GPIO79, AF2)
+#define GPIO80_USB_P3_6		MFP_CFG(GPIO80, AF2)
+
+#define GPIO13_CHOUT0		MFP_CFG(GPIO13, AF6)
+#define GPIO14_CHOUT1		MFP_CFG(GPIO14, AF6)
+
+#define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
+#define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
+#define GPIO6_NPIOW		MFP_CFG(GPIO6, AF3)
+#define GPIO7_NPIOS16		MFP_CFG(GPIO7, AF3)
+#define GPIO8_NPWAIT		MFP_CFG(GPIO8, AF3)
+
+#define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
+#define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
+#define GPIO13_PWM2_OUT		MFP_CFG(GPIO13, AF1)
+#define GPIO14_PWM3_OUT		MFP_CFG(GPIO14, AF1)
+
+#endif /* __ASM_ARCH_MFP_PXA320_H */

arch/arm/mach-pxa/mfp-pxa3xx.c

@@ -0,0 +1,59 @@
+/*
+ * linux/arch/arm/mach-pxa/mfp.c
+ *
+ * PXA3xx Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <mach/hardware.h>
+#include "mfp-pxa3xx.h"
+#include <mach/pxa3xx-regs.h>
+
+#ifdef CONFIG_PM
+/*
+ * Configure the MFPs appropriately for suspend/resume.
+ * FIXME: this should probably depend on which system state we're
+ * entering - for instance, we might not want to place MFP pins in
+ * a pull-down mode if they're an active low chip select, and we're
+ * just entering standby.
+ */
+static int pxa3xx_mfp_suspend(void)
+{
+	mfp_config_lpm();
+	return 0;
+}
+
+static void pxa3xx_mfp_resume(void)
+{
+	mfp_config_run();
+
+	/* clear RDH bit when MFP settings are restored
+	 *
+	 * NOTE: the last 3 bits DxS are write-1-to-clear so carefully
+	 * preserve them here in case they will be referenced later
+	 */
+	ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
+}
+#else
+#define pxa3xx_mfp_suspend	NULL
+#define pxa3xx_mfp_resume	NULL
+#endif
+
+struct syscore_ops pxa3xx_mfp_syscore_ops = {
+	.suspend	= pxa3xx_mfp_suspend,
+	.resume		= pxa3xx_mfp_resume,
+};

arch/arm/mach-pxa/mfp-pxa930.h

@@ -0,0 +1,498 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+ *
+ * PXA930 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA9xx_H
+#define __ASM_ARCH_MFP_PXA9xx_H
+
+#include "mfp-pxa3xx.h"
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
+
+#define GSIM_UCLK_GPIO_79	MFP_CFG(GSIM_UCLK, AF0)
+#define GSIM_UIO_GPIO_80	MFP_CFG(GSIM_UIO, AF0)
+#define GSIM_nURST_GPIO_81	MFP_CFG(GSIM_nURST, AF0)
+#define GSIM_UDET_GPIO_82	MFP_CFG(GSIM_UDET, AF0)
+
+#define DF_IO15_GPIO_28		MFP_CFG(DF_IO15, AF0)
+#define DF_IO14_GPIO_29		MFP_CFG(DF_IO14, AF0)
+#define DF_IO13_GPIO_30		MFP_CFG(DF_IO13, AF0)
+#define DF_IO12_GPIO_31		MFP_CFG(DF_IO12, AF0)
+#define DF_IO11_GPIO_32		MFP_CFG(DF_IO11, AF0)
+#define DF_IO10_GPIO_33		MFP_CFG(DF_IO10, AF0)
+#define DF_IO9_GPIO_34		MFP_CFG(DF_IO9, AF0)
+#define DF_IO8_GPIO_35		MFP_CFG(DF_IO8, AF0)
+#define DF_IO7_GPIO_36		MFP_CFG(DF_IO7, AF0)
+#define DF_IO6_GPIO_37		MFP_CFG(DF_IO6, AF0)
+#define DF_IO5_GPIO_38		MFP_CFG(DF_IO5, AF0)
+#define DF_IO4_GPIO_39		MFP_CFG(DF_IO4, AF0)
+#define DF_IO3_GPIO_40		MFP_CFG(DF_IO3, AF0)
+#define DF_IO2_GPIO_41		MFP_CFG(DF_IO2, AF0)
+#define DF_IO1_GPIO_42		MFP_CFG(DF_IO1, AF0)
+#define DF_IO0_GPIO_43		MFP_CFG(DF_IO0, AF0)
+#define DF_nCS0_GPIO_44		MFP_CFG(DF_nCS0, AF0)
+#define DF_nCS1_GPIO_45		MFP_CFG(DF_nCS1, AF0)
+#define DF_nWE_GPIO_46		MFP_CFG(DF_nWE, AF0)
+#define DF_nRE_nOE_GPIO_47	MFP_CFG(DF_nRE_nOE, AF0)
+#define DF_CLE_nOE_GPIO_48	MFP_CFG(DF_CLE_nOE, AF0)
+#define DF_nADV1_ALE_GPIO_49	MFP_CFG(DF_nADV1_ALE, AF0)
+#define DF_nADV2_ALE_GPIO_50	MFP_CFG(DF_nADV2_ALE, AF0)
+#define DF_INT_RnB_GPIO_51	MFP_CFG(DF_INT_RnB, AF0)
+#define DF_SCLK_E_GPIO_52	MFP_CFG(DF_SCLK_E, AF0)
+
+#define DF_ADDR0_GPIO_53	MFP_CFG(DF_ADDR0, AF0)
+#define DF_ADDR1_GPIO_54	MFP_CFG(DF_ADDR1, AF0)
+#define DF_ADDR2_GPIO_55	MFP_CFG(DF_ADDR2, AF0)
+#define DF_ADDR3_GPIO_56	MFP_CFG(DF_ADDR3, AF0)
+#define nXCVREN_GPIO_57		MFP_CFG(nXCVREN, AF0)
+#define nLUA_GPIO_58		MFP_CFG(nLUA, AF0)
+#define nLLA_GPIO_59		MFP_CFG(nLLA, AF0)
+#define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
+#define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
+#define RDY_GPIO_62		MFP_CFG(RDY, AF0)
+#define PMIC_INT_GPIO83		MFP_CFG_LPM(PMIC_INT, AF0, PULL_HIGH)
+
+/* Chip Select */
+#define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
+#define DF_nCS1_nCS3		MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
+
+/* AC97 */
+#define GPIO83_BAC97_SYSCLK	MFP_CFG(GPIO83, AF3)
+#define GPIO84_BAC97_SDATA_IN0	MFP_CFG(GPIO84, AF3)
+#define GPIO85_BAC97_BITCLK	MFP_CFG(GPIO85, AF3)
+#define GPIO86_BAC97_nRESET	MFP_CFG(GPIO86, AF3)
+#define GPIO87_BAC97_SYNC	MFP_CFG(GPIO87, AF3)
+#define GPIO88_BAC97_SDATA_OUT	MFP_CFG(GPIO88, AF3)
+
+/* I2C */
+#define GPIO39_CI2C_SCL		MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
+#define GPIO40_CI2C_SDA		MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
+
+#define GPIO51_CI2C_SCL		MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
+#define GPIO52_CI2C_SDA		MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
+
+#define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
+#define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
+
+#define GPIO73_CI2C_SCL		MFP_CFG_LPM(GPIO73, AF1, PULL_HIGH)
+#define GPIO74_CI2C_SDA		MFP_CFG_LPM(GPIO74, AF1, PULL_HIGH)
+
+#define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
+#define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
+
+#define GPIO89_CI2C_SCL		MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
+#define GPIO90_CI2C_SDA		MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
+
+#define GPIO95_CI2C_SCL		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_CI2C_SDA		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+
+#define GPIO97_CI2C_SCL		MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
+#define GPIO98_CI2C_SDA		MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
+
+/* QCI */
+#define GPIO63_CI_DD_9		MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
+#define GPIO64_CI_DD_8		MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
+#define GPIO65_CI_DD_7		MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
+#define GPIO66_CI_DD_6		MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
+#define GPIO67_CI_DD_5		MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
+#define GPIO68_CI_DD_4		MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
+#define GPIO69_CI_DD_3		MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
+#define GPIO70_CI_DD_2		MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
+#define GPIO71_CI_DD_1		MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
+#define GPIO72_CI_DD_0		MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
+#define GPIO73_CI_HSYNC		MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
+#define GPIO74_CI_VSYNC		MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
+#define GPIO75_CI_MCLK		MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
+#define GPIO76_CI_PCLK		MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
+
+/* KEYPAD */
+#define GPIO4_KP_DKIN_4		MFP_CFG_LPM(GPIO4, AF3, FLOAT)
+#define GPIO5_KP_DKIN_5		MFP_CFG_LPM(GPIO5, AF3, FLOAT)
+#define GPIO6_KP_DKIN_6		MFP_CFG_LPM(GPIO6, AF3, FLOAT)
+#define GPIO7_KP_DKIN_7		MFP_CFG_LPM(GPIO7, AF3, FLOAT)
+#define GPIO8_KP_DKIN_4		MFP_CFG_LPM(GPIO8, AF3, FLOAT)
+#define GPIO9_KP_DKIN_5		MFP_CFG_LPM(GPIO9, AF3, FLOAT)
+#define GPIO10_KP_DKIN_6	MFP_CFG_LPM(GPIO10, AF3, FLOAT)
+#define GPIO11_KP_DKIN_7	MFP_CFG_LPM(GPIO11, AF3, FLOAT)
+
+#define GPIO12_KP_DKIN_0	MFP_CFG_LPM(GPIO12, AF2, FLOAT)
+#define GPIO13_KP_DKIN_1	MFP_CFG_LPM(GPIO13, AF2, FLOAT)
+#define GPIO14_KP_DKIN_2	MFP_CFG_LPM(GPIO14, AF2, FLOAT)
+#define GPIO15_KP_DKIN_3	MFP_CFG_LPM(GPIO15, AF2, FLOAT)
+
+#define GPIO41_KP_DKIN_0	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO42_KP_DKIN_1	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO43_KP_DKIN_2	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO44_KP_DKIN_3	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO41_KP_DKIN_4	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_KP_DKIN_5	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+
+#define GPIO0_KP_MKIN_0		MFP_CFG_LPM(GPIO0, AF1, FLOAT)
+#define GPIO2_KP_MKIN_1		MFP_CFG_LPM(GPIO2, AF1, FLOAT)
+#define GPIO4_KP_MKIN_2		MFP_CFG_LPM(GPIO4, AF1, FLOAT)
+#define GPIO6_KP_MKIN_3		MFP_CFG_LPM(GPIO6, AF1, FLOAT)
+#define GPIO8_KP_MKIN_4		MFP_CFG_LPM(GPIO8, AF1, FLOAT)
+#define GPIO10_KP_MKIN_5	MFP_CFG_LPM(GPIO10, AF1, FLOAT)
+#define GPIO12_KP_MKIN_6	MFP_CFG_LPM(GPIO12, AF1, FLOAT)
+#define GPIO14_KP_MKIN_7	MFP_CFG(GPIO14, AF1)
+#define GPIO35_KP_MKIN_5	MFP_CFG(GPIO35, AF4)
+
+#define GPIO1_KP_MKOUT_0	MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
+#define GPIO3_KP_MKOUT_1	MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
+#define GPIO5_KP_MKOUT_2	MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
+#define GPIO7_KP_MKOUT_3	MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
+#define GPIO9_KP_MKOUT_4	MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_6	MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
+#define GPIO15_KP_MKOUT_7	MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO36_KP_MKOUT_5	MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO17_LCD_FCLK_RD	MFP_CFG(GPIO17, AF1)
+#define GPIO18_LCD_LCLK_A0	MFP_CFG(GPIO18, AF1)
+#define GPIO19_LCD_PCLK_WR	MFP_CFG(GPIO19, AF1)
+#define GPIO20_LCD_BIAS		MFP_CFG(GPIO20, AF1)
+#define GPIO21_LCD_CS		MFP_CFG(GPIO21, AF1)
+#define GPIO22_LCD_CS2		MFP_CFG(GPIO22, AF2)
+#define GPIO22_LCD_VSYNC	MFP_CFG(GPIO22, AF1)
+#define GPIO23_LCD_DD0		MFP_CFG(GPIO23, AF1)
+#define GPIO24_LCD_DD1		MFP_CFG(GPIO24, AF1)
+#define GPIO25_LCD_DD2		MFP_CFG(GPIO25, AF1)
+#define GPIO26_LCD_DD3		MFP_CFG(GPIO26, AF1)
+#define GPIO27_LCD_DD4		MFP_CFG(GPIO27, AF1)
+#define GPIO28_LCD_DD5		MFP_CFG(GPIO28, AF1)
+#define GPIO29_LCD_DD6		MFP_CFG(GPIO29, AF1)
+#define GPIO30_LCD_DD7		MFP_CFG(GPIO30, AF1)
+#define GPIO31_LCD_DD8		MFP_CFG(GPIO31, AF1)
+#define GPIO32_LCD_DD9		MFP_CFG(GPIO32, AF1)
+#define GPIO33_LCD_DD10		MFP_CFG(GPIO33, AF1)
+#define GPIO34_LCD_DD11		MFP_CFG(GPIO34, AF1)
+#define GPIO35_LCD_DD12		MFP_CFG(GPIO35, AF1)
+#define GPIO36_LCD_DD13		MFP_CFG(GPIO36, AF1)
+#define GPIO37_LCD_DD14		MFP_CFG(GPIO37, AF1)
+#define GPIO38_LCD_DD15		MFP_CFG(GPIO38, AF1)
+#define GPIO39_LCD_DD16		MFP_CFG(GPIO39, AF1)
+#define GPIO40_LCD_DD17		MFP_CFG(GPIO40, AF1)
+#define GPIO41_LCD_CS2		MFP_CFG(GPIO41, AF3)
+#define GPIO42_LCD_VSYNC2	MFP_CFG(GPIO42, AF3)
+#define GPIO44_LCD_DD7		MFP_CFG(GPIO44, AF1)
+
+/* Mini-LCD */
+#define GPIO17_MLCD_FCLK	MFP_CFG(GPIO17, AF3)
+#define GPIO18_MLCD_LCLK	MFP_CFG(GPIO18, AF3)
+#define GPIO19_MLCD_PCLK	MFP_CFG(GPIO19, AF3)
+#define GPIO20_MLCD_BIAS	MFP_CFG(GPIO20, AF3)
+#define GPIO23_MLCD_DD0		MFP_CFG(GPIO23, AF3)
+#define GPIO24_MLCD_DD1		MFP_CFG(GPIO24, AF3)
+#define GPIO25_MLCD_DD2		MFP_CFG(GPIO25, AF3)
+#define GPIO26_MLCD_DD3		MFP_CFG(GPIO26, AF3)
+#define GPIO27_MLCD_DD4		MFP_CFG(GPIO27, AF3)
+#define GPIO28_MLCD_DD5		MFP_CFG(GPIO28, AF3)
+#define GPIO29_MLCD_DD6		MFP_CFG(GPIO29, AF3)
+#define GPIO30_MLCD_DD7		MFP_CFG(GPIO30, AF3)
+#define GPIO31_MLCD_DD8		MFP_CFG(GPIO31, AF3)
+#define GPIO32_MLCD_DD9		MFP_CFG(GPIO32, AF3)
+#define GPIO33_MLCD_DD10	MFP_CFG(GPIO33, AF3)
+#define GPIO34_MLCD_DD11	MFP_CFG(GPIO34, AF3)
+#define GPIO35_MLCD_DD12	MFP_CFG(GPIO35, AF3)
+#define GPIO36_MLCD_DD13	MFP_CFG(GPIO36, AF3)
+#define GPIO37_MLCD_DD14	MFP_CFG(GPIO37, AF3)
+#define GPIO38_MLCD_DD15	MFP_CFG(GPIO38, AF3)
+#define GPIO44_MLCD_DD7		MFP_CFG(GPIO44, AF5)
+
+/* MMC1 */
+#define GPIO10_MMC1_DAT3	MFP_CFG(GPIO10, AF4)
+#define GPIO11_MMC1_DAT2	MFP_CFG(GPIO11, AF4)
+#define GPIO12_MMC1_DAT1	MFP_CFG(GPIO12, AF4)
+#define GPIO13_MMC1_DAT0	MFP_CFG(GPIO13, AF4)
+#define GPIO14_MMC1_CMD		MFP_CFG(GPIO14, AF4)
+#define GPIO15_MMC1_CLK		MFP_CFG(GPIO15, AF4)
+#define GPIO55_MMC1_CMD		MFP_CFG(GPIO55, AF3)
+#define GPIO56_MMC1_CLK		MFP_CFG(GPIO56, AF3)
+#define GPIO57_MMC1_DAT0	MFP_CFG(GPIO57, AF3)
+#define GPIO58_MMC1_DAT1	MFP_CFG(GPIO58, AF3)
+#define GPIO59_MMC1_DAT2	MFP_CFG(GPIO59, AF3)
+#define GPIO60_MMC1_DAT3	MFP_CFG(GPIO60, AF3)
+
+#define DF_ADDR0_MMC1_CLK	MFP_CFG(DF_ADDR0, AF2)
+#define DF_ADDR1_MMC1_CMD	MFP_CFG(DF_ADDR1, AF2)
+#define DF_ADDR2_MMC1_DAT0	MFP_CFG(DF_ADDR2, AF2)
+#define DF_ADDR3_MMC1_DAT1	MFP_CFG(DF_ADDR3, AF3)
+#define nXCVREN_MMC1_DAT2	MFP_CFG(nXCVREN, AF2)
+
+/* MMC2 */
+#define GPIO31_MMC2_CMD		MFP_CFG(GPIO31, AF7)
+#define GPIO32_MMC2_CLK		MFP_CFG(GPIO32, AF7)
+#define GPIO33_MMC2_DAT0	MFP_CFG(GPIO33, AF7)
+#define GPIO34_MMC2_DAT1	MFP_CFG(GPIO34, AF7)
+#define GPIO35_MMC2_DAT2	MFP_CFG(GPIO35, AF7)
+#define GPIO36_MMC2_DAT3	MFP_CFG(GPIO36, AF7)
+
+#define GPIO101_MMC2_DAT3	MFP_CFG(GPIO101, AF1)
+#define GPIO102_MMC2_DAT2	MFP_CFG(GPIO102, AF1)
+#define GPIO103_MMC2_DAT1	MFP_CFG(GPIO103, AF1)
+#define GPIO104_MMC2_DAT0	MFP_CFG(GPIO104, AF1)
+#define GPIO105_MMC2_CMD	MFP_CFG(GPIO105, AF1)
+#define GPIO106_MMC2_CLK	MFP_CFG(GPIO106, AF1)
+
+#define DF_IO10_MMC2_DAT3	MFP_CFG(DF_IO10, AF3)
+#define DF_IO11_MMC2_DAT2	MFP_CFG(DF_IO11, AF3)
+#define DF_IO12_MMC2_DAT1	MFP_CFG(DF_IO12, AF3)
+#define DF_IO13_MMC2_DAT0	MFP_CFG(DF_IO13, AF3)
+#define DF_IO14_MMC2_CLK	MFP_CFG(DF_IO14, AF3)
+#define DF_IO15_MMC2_CMD	MFP_CFG(DF_IO15, AF3)
+
+/* BSSP1 */
+#define GPIO12_BSSP1_CLK	MFP_CFG(GPIO12, AF3)
+#define GPIO13_BSSP1_FRM	MFP_CFG(GPIO13, AF3)
+#define GPIO14_BSSP1_RXD	MFP_CFG(GPIO14, AF3)
+#define GPIO15_BSSP1_TXD	MFP_CFG(GPIO15, AF3)
+#define GPIO97_BSSP1_CLK	MFP_CFG(GPIO97, AF5)
+#define GPIO98_BSSP1_FRM	MFP_CFG(GPIO98, AF5)
+
+/* BSSP2 */
+#define GPIO84_BSSP2_SDATA_IN	MFP_CFG(GPIO84, AF1)
+#define GPIO85_BSSP2_BITCLK	MFP_CFG(GPIO85, AF1)
+#define GPIO86_BSSP2_SYSCLK	MFP_CFG(GPIO86, AF1)
+#define GPIO87_BSSP2_SYNC	MFP_CFG(GPIO87, AF1)
+#define GPIO88_BSSP2_DATA_OUT	MFP_CFG(GPIO88, AF1)
+#define GPIO86_BSSP2_SDATA_IN	MFP_CFG(GPIO86, AF4)
+
+/* BSSP3 */
+#define GPIO79_BSSP3_CLK	MFP_CFG(GPIO79, AF1)
+#define GPIO80_BSSP3_FRM	MFP_CFG(GPIO80, AF1)
+#define GPIO81_BSSP3_TXD	MFP_CFG(GPIO81, AF1)
+#define GPIO82_BSSP3_RXD	MFP_CFG(GPIO82, AF1)
+#define GPIO83_BSSP3_SYSCLK	MFP_CFG(GPIO83, AF1)
+
+/* BSSP4 */
+#define GPIO43_BSSP4_CLK	MFP_CFG(GPIO43, AF4)
+#define GPIO44_BSSP4_FRM	MFP_CFG(GPIO44, AF4)
+#define GPIO45_BSSP4_TXD	MFP_CFG(GPIO45, AF4)
+#define GPIO46_BSSP4_RXD	MFP_CFG(GPIO46, AF4)
+
+#define GPIO51_BSSP4_CLK	MFP_CFG(GPIO51, AF4)
+#define GPIO52_BSSP4_FRM	MFP_CFG(GPIO52, AF4)
+#define GPIO53_BSSP4_TXD	MFP_CFG(GPIO53, AF4)
+#define GPIO54_BSSP4_RXD	MFP_CFG(GPIO54, AF4)
+
+/* GSSP1 */
+#define GPIO79_GSSP1_CLK	MFP_CFG(GPIO79, AF2)
+#define GPIO80_GSSP1_FRM	MFP_CFG(GPIO80, AF2)
+#define GPIO81_GSSP1_TXD	MFP_CFG(GPIO81, AF2)
+#define GPIO82_GSSP1_RXD	MFP_CFG(GPIO82, AF2)
+#define GPIO83_GSSP1_SYSCLK	MFP_CFG(GPIO83, AF2)
+
+#define GPIO93_GSSP1_CLK	MFP_CFG(GPIO93, AF4)
+#define GPIO94_GSSP1_FRM	MFP_CFG(GPIO94, AF4)
+#define GPIO95_GSSP1_TXD	MFP_CFG(GPIO95, AF4)
+#define GPIO96_GSSP1_RXD	MFP_CFG(GPIO96, AF4)
+
+/* GSSP2 */
+#define GPIO47_GSSP2_CLK	MFP_CFG(GPIO47, AF4)
+#define GPIO48_GSSP2_FRM	MFP_CFG(GPIO48, AF4)
+#define GPIO49_GSSP2_RXD	MFP_CFG(GPIO49, AF4)
+#define GPIO50_GSSP2_TXD	MFP_CFG(GPIO50, AF4)
+
+#define GPIO69_GSSP2_CLK	MFP_CFG(GPIO69, AF4)
+#define GPIO70_GSSP2_FRM	MFP_CFG(GPIO70, AF4)
+#define GPIO71_GSSP2_RXD	MFP_CFG(GPIO71, AF4)
+#define GPIO72_GSSP2_TXD	MFP_CFG(GPIO72, AF4)
+
+#define GPIO84_GSSP2_RXD	MFP_CFG(GPIO84, AF2)
+#define GPIO85_GSSP2_CLK	MFP_CFG(GPIO85, AF2)
+#define GPIO86_GSSP2_SYSCLK	MFP_CFG(GPIO86, AF2)
+#define GPIO87_GSSP2_FRM	MFP_CFG(GPIO87, AF2)
+#define GPIO88_GSSP2_TXD	MFP_CFG(GPIO88, AF2)
+#define GPIO86_GSSP2_RXD	MFP_CFG(GPIO86, AF5)
+
+#define GPIO103_GSSP2_CLK	MFP_CFG(GPIO103, AF2)
+#define GPIO104_GSSP2_FRM	MFP_CFG(GPIO104, AF2)
+#define GPIO105_GSSP2_RXD	MFP_CFG(GPIO105, AF2)
+#define GPIO106_GSSP2_TXD	MFP_CFG(GPIO106, AF2)
+
+/* UART1 - FFUART */
+#define GPIO47_UART1_DSR_N	MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART1_DTR_N	MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART1_RI		MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART1_DCD	MFP_CFG(GPIO50, AF1)
+#define GPIO51_UART1_CTS	MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART1_RTS	MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART1_RXD	MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART1_TXD	MFP_CFG(GPIO54, AF1)
+
+#define GPIO63_UART1_TXD	MFP_CFG(GPIO63, AF2)
+#define GPIO64_UART1_RXD	MFP_CFG(GPIO64, AF2)
+#define GPIO65_UART1_DSR	MFP_CFG(GPIO65, AF2)
+#define GPIO66_UART1_DTR	MFP_CFG(GPIO66, AF2)
+#define GPIO67_UART1_RI		MFP_CFG(GPIO67, AF2)
+#define GPIO68_UART1_DCD	MFP_CFG(GPIO68, AF2)
+#define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
+#define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
+
+#define GPIO53_UART1_TXD	MFP_CFG(GPIO53, AF2)
+#define GPIO54_UART1_RXD	MFP_CFG(GPIO54, AF2)
+
+/* UART2 - BTUART */
+#define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
+#define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
+#define GPIO93_UART2_CTS	MFP_CFG(GPIO93, AF1)
+#define GPIO94_UART2_RTS	MFP_CFG(GPIO94, AF1)
+
+/* UART3 - STUART */
+#define GPIO43_UART3_RTS	MFP_CFG(GPIO43, AF3)
+#define GPIO44_UART3_CTS	MFP_CFG(GPIO44, AF3)
+#define GPIO45_UART3_RXD	MFP_CFG(GPIO45, AF3)
+#define GPIO46_UART3_TXD	MFP_CFG(GPIO46, AF3)
+
+#define GPIO75_UART3_RTS	MFP_CFG(GPIO75, AF5)
+#define GPIO76_UART3_CTS	MFP_CFG(GPIO76, AF5)
+#define GPIO77_UART3_TXD	MFP_CFG(GPIO77, AF5)
+#define GPIO78_UART3_RXD	MFP_CFG(GPIO78, AF5)
+
+/* DFI */
+#define DF_IO0_DF_IO0		MFP_CFG(DF_IO0, AF2)
+#define DF_IO1_DF_IO1		MFP_CFG(DF_IO1, AF2)
+#define DF_IO2_DF_IO2		MFP_CFG(DF_IO2, AF2)
+#define DF_IO3_DF_IO3		MFP_CFG(DF_IO3, AF2)
+#define DF_IO4_DF_IO4		MFP_CFG(DF_IO4, AF2)
+#define DF_IO5_DF_IO5		MFP_CFG(DF_IO5, AF2)
+#define DF_IO6_DF_IO6		MFP_CFG(DF_IO6, AF2)
+#define DF_IO7_DF_IO7		MFP_CFG(DF_IO7, AF2)
+#define DF_IO8_DF_IO8		MFP_CFG(DF_IO8, AF2)
+#define DF_IO9_DF_IO9		MFP_CFG(DF_IO9, AF2)
+#define DF_IO10_DF_IO10		MFP_CFG(DF_IO10, AF2)
+#define DF_IO11_DF_IO11		MFP_CFG(DF_IO11, AF2)
+#define DF_IO12_DF_IO12		MFP_CFG(DF_IO12, AF2)
+#define DF_IO13_DF_IO13		MFP_CFG(DF_IO13, AF2)
+#define DF_IO14_DF_IO14		MFP_CFG(DF_IO14, AF2)
+#define DF_IO15_DF_IO15		MFP_CFG(DF_IO15, AF2)
+#define DF_nADV1_ALE_DF_nADV1	MFP_CFG(DF_nADV1_ALE, AF2)
+#define DF_nADV2_ALE_DF_nADV2	MFP_CFG(DF_nADV2_ALE, AF2)
+#define DF_nCS0_DF_nCS0		MFP_CFG(DF_nCS0, AF2)
+#define DF_nCS1_DF_nCS1		MFP_CFG(DF_nCS1, AF2)
+#define DF_nRE_nOE_DF_nOE	MFP_CFG(DF_nRE_nOE, AF2)
+#define DF_nWE_DF_nWE		MFP_CFG(DF_nWE, AF2)
+
+/* DFI - NAND */
+#define DF_CLE_nOE_ND_CLE	MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
+#define DF_INT_RnB_ND_INT_RnB	MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
+#define DF_IO0_ND_IO0		MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
+#define DF_IO1_ND_IO1		MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
+#define DF_IO2_ND_IO2		MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
+#define DF_IO3_ND_IO3		MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
+#define DF_IO4_ND_IO4		MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
+#define DF_IO5_ND_IO5		MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
+#define DF_IO6_ND_IO6		MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
+#define DF_IO7_ND_IO7		MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
+#define DF_IO8_ND_IO8		MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
+#define DF_IO9_ND_IO9		MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
+#define DF_IO10_ND_IO10		MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
+#define DF_IO11_ND_IO11		MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
+#define DF_IO12_ND_IO12		MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
+#define DF_IO13_ND_IO13		MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
+#define DF_IO14_ND_IO14		MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
+#define DF_IO15_ND_IO15		MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
+#define DF_nADV1_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
+#define DF_nADV2_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
+#define	DF_nADV2_ALE_nCS3	MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
+#define DF_nCS0_ND_nCS0		MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
+#define DF_nCS1_ND_nCS1		MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
+#define DF_nRE_nOE_ND_nRE	MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
+#define DF_nWE_ND_nWE		MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
+
+/* PWM */
+#define GPIO41_PWM0		MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
+#define GPIO42_PWM1		MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
+#define GPIO43_PWM3		MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
+#define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
+#define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
+#define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+#define GPIO32_PWM0		MFP_CFG_LPM(GPIO32, AF4, PULL_LOW)
+
+/* CIR */
+#define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
+#define GPIO77_CIR_OUT		MFP_CFG(GPIO77, AF3)
+
+/* USB P2 */
+#define GPIO0_USB_P2_7		MFP_CFG(GPIO0, AF3)
+#define GPIO15_USB_P2_7		MFP_CFG(GPIO15, AF5)
+#define GPIO16_USB_P2_7		MFP_CFG(GPIO16, AF2)
+#define GPIO48_USB_P2_7		MFP_CFG(GPIO48, AF7)
+#define GPIO49_USB_P2_7		MFP_CFG(GPIO49, AF6)
+#define DF_IO9_USB_P2_7		MFP_CFG(DF_IO9, AF3)
+
+#define GPIO48_USB_P2_8		MFP_CFG(GPIO48, AF2)
+#define GPIO50_USB_P2_7		MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
+#define GPIO51_USB_P2_5		MFP_CFG(GPIO51, AF2)
+#define GPIO47_USB_P2_4		MFP_CFG(GPIO47, AF2)
+#define GPIO53_USB_P2_3		MFP_CFG(GPIO53, AF2)
+#define GPIO54_USB_P2_6		MFP_CFG(GPIO54, AF2)
+#define GPIO49_USB_P2_2		MFP_CFG(GPIO49, AF2)
+#define GPIO52_USB_P2_1		MFP_CFG(GPIO52, AF2)
+
+#define GPIO63_USB_P2_8		MFP_CFG(GPIO63, AF3)
+#define GPIO64_USB_P2_7		MFP_CFG(GPIO64, AF3)
+#define GPIO65_USB_P2_6		MFP_CFG(GPIO65, AF3)
+#define GPIO66_USG_P2_5		MFP_CFG(GPIO66, AF3)
+#define GPIO67_USB_P2_4		MFP_CFG(GPIO67, AF3)
+#define GPIO68_USB_P2_3		MFP_CFG(GPIO68, AF3)
+#define GPIO69_USB_P2_2		MFP_CFG(GPIO69, AF3)
+#define GPIO70_USB_P2_1		MFP_CFG(GPIO70, AF3)
+
+/* ULPI */
+#define GPIO31_USB_ULPI_D0	MFP_CFG(GPIO31, AF4)
+#define GPIO30_USB_ULPI_D1	MFP_CFG(GPIO30, AF7)
+#define GPIO33_USB_ULPI_D2	MFP_CFG(GPIO33, AF5)
+#define GPIO34_USB_ULPI_D3	MFP_CFG(GPIO34, AF5)
+#define GPIO35_USB_ULPI_D4	MFP_CFG(GPIO35, AF5)
+#define GPIO36_USB_ULPI_D5	MFP_CFG(GPIO36, AF5)
+#define GPIO41_USB_ULPI_D6	MFP_CFG(GPIO41, AF5)
+#define GPIO42_USB_ULPI_D7	MFP_CFG(GPIO42, AF5)
+#define GPIO37_USB_ULPI_DIR	MFP_CFG(GPIO37, AF4)
+#define GPIO38_USB_ULPI_CLK	MFP_CFG(GPIO38, AF4)
+#define GPIO39_USB_ULPI_STP	MFP_CFG(GPIO39, AF4)
+#define GPIO40_USB_ULPI_NXT	MFP_CFG(GPIO40, AF4)
+
+#define GPIO3_CLK26MOUTDMD	MFP_CFG(GPIO3, AF3)
+#define GPIO40_CLK26MOUTDMD	MFP_CFG(GPIO40, AF7)
+#define GPIO94_CLK26MOUTDMD	MFP_CFG(GPIO94, AF5)
+#define GPIO104_CLK26MOUTDMD	MFP_CFG(GPIO104, AF4)
+#define DF_ADDR1_CLK26MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
+#define DF_ADDR3_CLK26MOUTDMD	MFP_CFG(DF_ADDR3, AF3)
+
+#define GPIO14_CLK26MOUT	MFP_CFG(GPIO14, AF5)
+#define GPIO38_CLK26MOUT	MFP_CFG(GPIO38, AF7)
+#define GPIO92_CLK26MOUT	MFP_CFG(GPIO92, AF5)
+#define GPIO105_CLK26MOUT	MFP_CFG(GPIO105, AF4)
+
+#define GPIO2_CLK13MOUTDMD	MFP_CFG(GPIO2, AF3)
+#define GPIO39_CLK13MOUTDMD	MFP_CFG(GPIO39, AF7)
+#define GPIO50_CLK13MOUTDMD	MFP_CFG(GPIO50, AF3)
+#define GPIO93_CLK13MOUTDMD	MFP_CFG(GPIO93, AF5)
+#define GPIO103_CLK13MOUTDMD	MFP_CFG(GPIO103, AF4)
+#define DF_ADDR2_CLK13MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
+
+/* 1 wire */
+#define GPIO95_OW_DQ_IN		MFP_CFG(GPIO95, AF5)
+
+#endif /* __ASM_ARCH_MFP_PXA9xx_H */