mtk-lk/platform/mt6580/mt_battery.c

/* Copyright Statement:
*
* This software/firmware and related documentation ("MediaTek Software") are
* protected under relevant copyright laws. The information contained herein
* is confidential and proprietary to MediaTek Inc. and/or its licensors.
* Without the prior written permission of MediaTek inc. and/or its licensors,
* any reproduction, modification, use or disclosure of MediaTek Software,
* and information contained herein, in whole or in part, shall be strictly prohibited.
*/
/* MediaTek Inc. (C) 2015. All rights reserved.
*
* BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
* THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
* CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
* SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
* STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
* CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*/

#include <target/board.h>
#ifdef MTK_KERNEL_POWER_OFF_CHARGING
#define CFG_POWER_CHARGING
#endif
#ifdef CFG_POWER_CHARGING
#include <platform/mt_typedefs.h>
#include <platform/mt_reg_base.h>
#include <platform/mt_pmic.h>
#include <platform/upmu_hw.h>
#include <platform/upmu_common.h>
#include <platform/boot_mode.h>
#include <platform/mt_gpt.h>
#include <platform/mt_rtc.h>
//#include <platform/mt_disp_drv.h>
//#include <platform/mtk_wdt.h>
//#include <platform/mtk_key.h>
//#include <platform/mt_logo.h>
//#include <platform/mt_leds.h>
#include <printf.h>
#include <sys/types.h>
#include <target/cust_battery.h>

#if defined(MTK_BQ24261_SUPPORT)
#include <platform/bq24261.h>
#endif

#if defined(MTK_BQ24296_SUPPORT)
#include <platform/bq24296.h>
#endif

#if defined(MTK_NCP1854_SUPPORT)
#include <platform/ncp1854.h>
#endif

#ifdef MTK_FAN5405_SUPPORT
#include <platform/fan5405.h>
#endif

#undef printf


/*****************************************************************************
 *  Type define
 ****************************************************************************/
#if defined(CUST_BATTERY_LOWVOL_THRESOLD)
#define BATTERY_LOWVOL_THRESOLD CUST_BATTERY_LOWVOL_THRESOLD
#else
#define BATTERY_LOWVOL_THRESOLD             3450
#endif

/*****************************************************************************
 *  Global Variable
 ****************************************************************************/
bool g_boot_reason_change = false;

#if defined(STD_AC_LARGE_CURRENT)
int g_std_ac_large_current_en=1;
#else
int g_std_ac_large_current_en=0;
#endif

/*****************************************************************************
 *  Externl Variable
 ****************************************************************************/
extern bool g_boot_menu;
extern void mtk_wdt_restart(void);

int get_bat_volt(int times)
{
        int bat_vol;
#if defined(SWCHR_POWER_PATH)
                bat_vol = get_i_sense_volt(times);
#else
                bat_vol = get_bat_sense_volt(times);
#endif
        return bat_vol;
}

void kick_charger_wdt(void)
{
	/*
	//mt6325_upmu_set_rg_chrwdt_td(0x0);           // CHRWDT_TD, 4s
	mt6325_upmu_set_rg_chrwdt_td(0x3);           // CHRWDT_TD, 32s for keep charging for lk to kernel
	mt6325_upmu_set_rg_chrwdt_wr(1);             // CHRWDT_WR
	mt6325_upmu_set_rg_chrwdt_int_en(1);         // CHRWDT_INT_EN
	mt6325_upmu_set_rg_chrwdt_en(1);             // CHRWDT_EN
	mt6325_upmu_set_rg_chrwdt_flag_wr(1);        // CHRWDT_WR
	*/

	pmic_set_register_value(PMIC_RG_CHRWDT_TD,3);  // CHRWDT_TD, 32s for keep charging for lk to kernel
	pmic_set_register_value(PMIC_RG_CHRWDT_WR,1); // CHRWDT_WR
	pmic_set_register_value(PMIC_RG_CHRWDT_INT_EN,1);   // CHRWDT_INT_EN
	pmic_set_register_value(PMIC_RG_CHRWDT_EN,1);       // CHRWDT_EN
	pmic_set_register_value(PMIC_RG_CHRWDT_FLAG_WR,1);// CHRWDT_WR
}

#if defined(MTK_BATLOWV_NO_PANEL_ON_EARLY)
kal_bool is_low_battery(kal_int32  val)
{
	static UINT8 g_bat_low = 0xFF;

	//low battery only justice once in lk
	if (0xFF != g_bat_low)
		return g_bat_low;
	else
		g_bat_low = FALSE;

#if defined(SWCHR_POWER_PATH)
	if (0 == val)
		val = get_i_sense_volt(1);
#else
	if (0 == val)
		val = get_bat_sense_volt(1);
#endif

	if (val < BATTERY_LOWVOL_THRESOLD) {
		dprintf(CRITICAL, "%s, TRUE\n", __FUNCTION__);
		g_bat_low = 0x1;
	}

	if (FALSE == g_bat_low)
		dprintf(CRITICAL, "%s, FALSE\n", __FUNCTION__);

	return g_bat_low;
}
#endif

void pchr_turn_on_charging(kal_bool bEnable)
{
	pmic_set_register_value(PMIC_RG_USBDL_RST,1);//force leave USBDL mode
	//mt6325_upmu_set_rg_usbdl_rst(1);       //force leave USBDL mode

	kick_charger_wdt();

	pmic_set_register_value(PMIC_RG_CS_VTH,0xC);    // CS_VTH, 450mA
	//mt6325_upmu_set_rg_cs_vth(0xC);             // CS_VTH, 450mA
	pmic_set_register_value(PMIC_RG_CSDAC_EN,1);
	//mt6325_upmu_set_rg_csdac_en(1);               // CSDAC_EN
	pmic_set_register_value(PMIC_RG_CHR_EN,1);
	//mt6325_upmu_set_rg_chr_en(1);             // CHR_EN

#ifdef MTK_FAN5405_SUPPORT
	fan5405_hw_init();
	fan5405_turn_on_charging();
	fan5405_dump_register();
#endif

#if defined(MTK_BQ24261_SUPPORT)
	bq24261_hw_init();
	bq24261_charging_enable(bEnable);
	bq24261_dump_register();
#endif

#if defined(MTK_BQ24296_SUPPORT)
	bq24296_hw_init();
	bq24296_charging_enable(bEnable);
	bq24296_dump_register();
#endif

#if defined(MTK_NCP1854_SUPPORT)
	ncp1854_hw_init();
	ncp1854_charging_enable(bEnable);
	ncp1854_dump_register();
#endif

}

void pchr_turn_off_charging(void)
{
	pmic_set_register_value(PMIC_RG_CHRWDT_INT_EN,0);// CHRWDT_INT_EN
	pmic_set_register_value(PMIC_RG_CHRWDT_EN,0);// CHRWDT_EN
	pmic_set_register_value(PMIC_RG_CHRWDT_FLAG_WR,0);// CHRWDT_FLAG
	pmic_set_register_value(PMIC_RG_CSDAC_EN,0);// CSDAC_EN
	pmic_set_register_value(PMIC_RG_CHR_EN,0);// CHR_EN
	pmic_set_register_value(PMIC_RG_HWCV_EN,0);// RG_HWCV_EN
}




//enter this function when low battery with charger
void check_bat_protect_status()
{
	kal_int32 bat_val = 0;
	int current,chr_volt,cnt=0,i;

	chr_volt = get_charger_volt(1);

#if defined(SWCHR_POWER_PATH)
	bat_val = get_i_sense_volt(5);
#else
	bat_val = get_bat_sense_volt(5);
#endif

	dprintf(CRITICAL, "[%s]: check VBAT=%d mV with %d mV, chr:%d start charging... \n", __FUNCTION__, bat_val, BATTERY_LOWVOL_THRESOLD, chr_volt);

	while (bat_val < BATTERY_LOWVOL_THRESOLD) {
		mtk_wdt_restart();
		if (upmu_is_chr_det() == KAL_FALSE) {
			dprintf(CRITICAL, "[BATTERY] No Charger, Power OFF !\n");
			mt6575_power_off();
			while (1);
		}

		chr_volt = get_charger_volt(1);
		if (chr_volt > V_CHARGER_MAX) {
			dprintf(CRITICAL, "[BATTERY] charger voltage is too high: %d, threshold is %d\n", chr_volt,V_CHARGER_MAX);
			break;
		}

		pchr_turn_on_charging(KAL_TRUE);

#if defined(SWCHR_POWER_PATH)
		mdelay(5000);
#else
/*
		cnt=0;
		for (i=0; i<10; i++) {
			current=get_charging_current(1);
			chr_volt=get_charger_volt(1);
			if (current<100 && chr_volt<4400) {
				cnt++;
				dprintf(CRITICAL, "[BATTERY] charging current=%d charger volt=%d\n\r",current,chr_volt);
			} else {
				dprintf(CRITICAL, "[BATTERY] charging current=%d charger volt=%d\n\r",current,chr_volt);
				cnt=0;
			}
		}

		if (cnt>=8) {

			dprintf(CRITICAL, "[BATTERY] charging current and charger volt too low !! \n\r",cnt);

			pchr_turn_off_charging();
#ifndef NO_POWER_OFF
			mt6575_power_off();
#endif
			while (1) {
				dprintf(CRITICAL, "If you see the log, please check with RTC power off API\n\r");
			}
		}
		mdelay(50);
*/
#endif



#if defined(SWCHR_POWER_PATH)
#ifndef MTK_NCP1854_SUPPORT /* NCP1854 needs enable charging to have power path */
		pchr_turn_on_charging(KAL_FALSE);
		mdelay(100);
#endif
		bat_val = get_i_sense_volt(5);
#else
		bat_val = get_bat_sense_volt(5);
#endif
		dprintf(CRITICAL, "[%s]: check VBAT=%d mV  \n", __FUNCTION__, bat_val);
	}

	dprintf(CRITICAL, "[%s]: check VBAT=%d mV with %d mV, stop charging... \n", __FUNCTION__, bat_val, BATTERY_LOWVOL_THRESOLD);
}

void mt65xx_bat_init(void)
{
	kal_int32 bat_vol;

	// Low Battery Safety Booting

#if defined(SWCHR_POWER_PATH)
	bat_vol = get_i_sense_volt(1);
#else
	bat_vol = get_bat_sense_volt(1);
#endif

	//pchr_turn_on_charging(KAL_TRUE);
	dprintf(CRITICAL, "[mt65xx_bat_init] check VBAT=%d mV with %d mV\n", bat_vol, BATTERY_LOWVOL_THRESOLD);




	if (g_boot_mode == KERNEL_POWER_OFF_CHARGING_BOOT && (pmic_get_register_value(PMIC_PWRKEY_DEB)==0) ) {
		dprintf(CRITICAL, "[mt65xx_bat_init] KPOC+PWRKEY => change boot mode\n");

		g_boot_reason_change = true;
	}
	rtc_boot_check(false);

#ifndef MTK_DISABLE_POWER_ON_OFF_VOLTAGE_LIMITATION
#ifndef MTK_BATLOWV_NO_PANEL_ON_EARLY
	if (bat_vol < BATTERY_LOWVOL_THRESOLD) {
#else
	if (is_low_battery(bat_vol)) {
#endif
		if (g_boot_mode == KERNEL_POWER_OFF_CHARGING_BOOT && upmu_is_chr_det() == KAL_TRUE) {
			dprintf(CRITICAL, "[%s] Kernel Low Battery Power Off Charging Mode\n", __func__);
			g_boot_mode = LOW_POWER_OFF_CHARGING_BOOT;

			check_bat_protect_status();

			return;
		} else {
			dprintf(CRITICAL, "[BATTERY] battery voltage(%dmV) <= CLV ! Can not Boot Linux Kernel !! \n\r",bat_vol);
#ifndef NO_POWER_OFF
			mt6575_power_off();
#endif
			while (1) {
				dprintf(CRITICAL, "If you see the log, please check with RTC power off API\n\r");
			}
		}
	}
#endif
	return;
}

#else

#include <platform/mt_typedefs.h>
#include <platform/mt_reg_base.h>
#include <printf.h>

void mt65xx_bat_init(void)
{
	dprintf(CRITICAL, "[BATTERY] Skip mt65xx_bat_init !!\n\r");
	dprintf(CRITICAL, "[BATTERY] If you want to enable power off charging, \n\r");
	dprintf(CRITICAL, "[BATTERY] Please #define CFG_POWER_CHARGING!!\n\r");
}

int get_bat_volt(int times)
{
	int bat_vol;
#if defined(SWCHR_POWER_PATH)
	bat_vol = get_i_sense_volt(times);
#else
	bat_vol = get_bat_sense_volt(times);
#endif
	return bat_vol;
}

#endif