mtk-lk/platform/mt6735/mt_pmic_wrap_init.c

/* Copyright Statement:
 *
 * This software/firmware and related documentation ("MediaTek Software") are
 * protected under relevant copyright laws. The information contained herein
 * is confidential and proprietary to MediaTek Inc. and/or its licensors.
 * Without the prior written permission of MediaTek inc. and/or its licensors,
 * any reproduction, modification, use or disclosure of MediaTek Software,
 * and information contained herein, in whole or in part, shall be strictly prohibited.
 */
/* MediaTek Inc. (C) 2010. All rights reserved.
 *
 * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
 * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
 * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
 * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
 * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
 * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
 * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
 * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
 * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
 * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
 * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
 * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
 * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
 * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
 * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
 * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
 *
 * The following software/firmware and/or related documentation ("MediaTek Software")
 * have been modified by MediaTek Inc. All revisions are subject to any receiver's
 * applicable license agreements with MediaTek Inc.
 */

/******************************************************************************
 * mt_pmic_wrap_init.c - MTK PMIC Wrapper Driver
 *
 * Copyright 2008-2009 MediaTek Co.,Ltd.
 *
 * DESCRIPTION:
 *     This file provides API for other drivers to access PMIC registers
 *
 ******************************************************************************/

#include <platform/mt_pmic_wrap_init.h>

//---start ---internal API--------------------------------------------------
static S32 _pwrap_wacs2_nochk( U32 write, U32 adr, U32 wdata, U32 *rdata );
static S32 _pwrap_reset_spislv(void);
static S32 _pwrap_init_dio( U32 dio_en );
static S32 _pwrap_init_cipher( void );
static S32 _pwrap_init_reg_clock( U32 regck_sel );
static BOOL _pwrap_timeout_ns (U64 start_time_ns, U64 timeout_time_ns);
static U64 _pwrap_get_current_time(void);
static U64 _pwrap_time2ns (U64 time_us);
static S32 pwrap_read_nochk( U32  adr, U32 *rdata );
static S32 pwrap_write_nochk( U32  adr, U32  wdata );
static S32 _pwrap_wacs2_nochk( U32 write, U32 adr, U32 wdata, U32 *rdata );
void pwrap_dump_ap_register(void);
//---end--internal API--------------------------------------------------

#ifdef PMIC_WRAP_NO_PMIC
S32 pwrap_wacs2( U32  write, U32  adr, U32  wdata, U32 *rdata )
{
	PWRAPERR("there is no PMIC real chip,PMIC_WRAP do Nothing\n");
	return 0;
}
//******************************************************************************
//--external API for pmic_wrap user-------------------------------------------------
//******************************************************************************
S32 pwrap_read( U32  adr, U32 *rdata )
{
  return pwrap_wacs2( 0, adr,0,rdata );
}

S32 pwrap_write( U32  adr, U32  wdata )
{
  return pwrap_wacs2( 1, adr,wdata,0 );
}

/*
 *pmic_wrap init,init wrap interface
 *
 */
S32 pwrap_init ( void )
{
	dprintf(CRITICAL,"[PMIC_WRAP]There is no PMIC real chip, PMIC_WRAP do Nothing.\n");
	return 0;
}
#ifdef MACH_FPGA
S32 pwrap_init_lk ( void )
{
 return 0;
}
//--------------------------------------------------------
//    Function : _pwrap_status_update_test()
// Description :only for early porting
//   Parameter :
//      Return :
//--------------------------------------------------------
static S32 _pwrap_status_update_test_porting( void )
{
  return 0;
}

void pwrap_init_for_early_porting(void)
{

}
#endif//endif MACH_FPGA
#else
/******************************************************************************
 wrapper timeout
******************************************************************************/
#define PWRAP_TIMEOUT
//use the same API name with kernel driver
//however,the timeout API in uboot use tick instead of ns
#ifdef PWRAP_TIMEOUT
static U64 _pwrap_get_current_time(void)
{
  return gpt4_get_current_tick();
}
//_pwrap_timeout_tick,use the same API name with kernel driver

static BOOL _pwrap_timeout_ns (U64 start_time, U64 elapse_time)
{
  return gpt4_timeout_tick(start_time, elapse_time);
}

//_pwrap_time2tick_us
static U64 _pwrap_time2ns (U64 time_us)
{
  return gpt4_time2tick_us(time_us);
}

#else
static U64 _pwrap_get_current_time(void)
{
  return 0;
}
static BOOL _pwrap_timeout_ns (U64 start_time, U64 elapse_time)//,U64 timeout_ns)
{
  return FALSE;
}
static U64 _pwrap_time2ns (U64 time_us)
{
  return 0;
}

#endif
//#####################################################################
//define macro and inline function (for do while loop)
//#####################################################################
typedef U32 (*loop_condition_fp)(U32);//define a function pointer

static inline U32 wait_for_fsm_idle(U32 x)
{
  return (GET_WACS0_FSM( x ) != WACS_FSM_IDLE );
}
static inline U32 wait_for_fsm_vldclr(U32 x)
{
  return (GET_WACS0_FSM( x ) != WACS_FSM_WFVLDCLR);
}
static inline U32 wait_for_sync(U32 x)
{
  return (GET_SYNC_IDLE0(x) != WACS_SYNC_IDLE);
}
static inline U32 wait_for_idle_and_sync(U32 x)
{
  return ((GET_WACS2_FSM(x) != WACS_FSM_IDLE) || (GET_SYNC_IDLE2(x) != WACS_SYNC_IDLE)) ;
}
static inline U32 wait_for_wrap_idle(U32 x)
{
  return ((GET_WRAP_FSM(x) != 0x0) || (GET_WRAP_CH_DLE_RESTCNT(x) != 0x0));
}
static inline U32 wait_for_wrap_state_idle(U32 x)
{
  return ( GET_WRAP_AG_DLE_RESTCNT( x ) != 0 ) ;
}
static inline U32 wait_for_man_idle_and_noreq(U32 x)
{
  return ( (GET_MAN_REQ(x) != MAN_FSM_NO_REQ ) || (GET_MAN_FSM(x) != MAN_FSM_IDLE) );
}
static inline U32 wait_for_man_vldclr(U32 x)
{
  return  (GET_MAN_FSM( x ) != MAN_FSM_WFVLDCLR) ;
}
static inline U32 wait_for_cipher_ready(U32 x)
{
  return (x!=3) ;
}
static inline U32 wait_for_stdupd_idle(U32 x)
{
  return ( GET_STAUPD_FSM(x) != 0x0) ;
}

static inline U32 wait_for_state_ready_init(loop_condition_fp fp,U32 timeout_us,volatile U32 *wacs_register,U32 *read_reg)
{

  U64 start_time_ns=0, timeout_ns=0;
  U32 reg_rdata=0x0;
  start_time_ns = _pwrap_get_current_time();
  timeout_ns = _pwrap_time2ns(timeout_us);
  do
  {
    if (_pwrap_timeout_ns(start_time_ns, timeout_ns))
    {
      PWRAPERR("wait_for_state_ready_init timeout when waiting for idle\n");
      return E_PWR_WAIT_IDLE_TIMEOUT;
    }
    reg_rdata = WRAP_RD32(wacs_register);
  } while( fp(reg_rdata)); //IDLE State
  if(read_reg)
   *read_reg=reg_rdata;
  return 0;
}

static inline U32 wait_for_state_idle_init(loop_condition_fp fp,U32 timeout_us,volatile U32 *wacs_register,volatile U32 *wacs_vldclr_register,U32 *read_reg)
{

  U64 start_time_ns=0, timeout_ns=0;
  U32 reg_rdata;
  start_time_ns = _pwrap_get_current_time();
  timeout_ns = _pwrap_time2ns(timeout_us);
  do
  {
	if (_pwrap_timeout_ns(start_time_ns, timeout_ns))
    {
      PWRAPERR("wait_for_state_idle_init timeout when waiting for idle\n");
      pwrap_dump_ap_register();
      //pwrap_trace_wacs2();
      //BUG_ON(1);
      return E_PWR_WAIT_IDLE_TIMEOUT;
    }
    reg_rdata = WRAP_RD32(wacs_register);
    //if last read command timeout,clear vldclr bit
    //read command state machine:FSM_REQ-->wfdle-->WFVLDCLR;write:FSM_REQ-->idle
    switch ( GET_WACS0_FSM( reg_rdata ) )
    {
      case WACS_FSM_WFVLDCLR:
        WRAP_WR32(wacs_vldclr_register , 1);
        PWRAPERR("WACS_FSM = PMIC_WRAP_WACS_VLDCLR\n");
        break;
      case WACS_FSM_WFDLE:
        PWRAPERR("WACS_FSM = WACS_FSM_WFDLE\n");
        break;
      case WACS_FSM_REQ:
        PWRAPERR("WACS_FSM = WACS_FSM_REQ\n");
        break;
      default:
        break;
    }
  }while( fp(reg_rdata)); //IDLE State
  if(read_reg)
   *read_reg=reg_rdata;
  return 0;
}
static inline U32 wait_for_state_idle(loop_condition_fp fp,U32 timeout_us,volatile U32 *wacs_register,volatile U32 *wacs_vldclr_register,U32 *read_reg)
{

  U64 start_time_ns=0, timeout_ns=0;
  U32 reg_rdata;
  start_time_ns = _pwrap_get_current_time();
  timeout_ns = _pwrap_time2ns(timeout_us);
  do
  {
	if (_pwrap_timeout_ns(start_time_ns, timeout_ns))
    {
      PWRAPERR("wait_for_state_idle timeout when waiting for idle\n");
      pwrap_dump_ap_register();
//      pwrap_trace_wacs2();
//      BUG_ON(1);
      return E_PWR_WAIT_IDLE_TIMEOUT;
    }
    reg_rdata = WRAP_RD32(wacs_register);
    if( GET_INIT_DONE0( reg_rdata ) != WACS_INIT_DONE)
    {
      PWRAPERR("initialization isn't finished \n");
      return E_PWR_NOT_INIT_DONE;
    }
    //if last read command timeout,clear vldclr bit
    //read command state machine:FSM_REQ-->wfdle-->WFVLDCLR;write:FSM_REQ-->idle
    switch ( GET_WACS0_FSM( reg_rdata ) )
    {
      case WACS_FSM_WFVLDCLR:
        WRAP_WR32(wacs_vldclr_register , 1);
        PWRAPERR("WACS_FSM = PMIC_WRAP_WACS_VLDCLR\n");
        break;
      case WACS_FSM_WFDLE:
        PWRAPERR("WACS_FSM = WACS_FSM_WFDLE\n");
        break;
      case WACS_FSM_REQ:
        PWRAPERR("WACS_FSM = WACS_FSM_REQ\n");
        break;
      default:
        break;
    }
  }while( fp(reg_rdata)); //IDLE State
  if(read_reg)
   *read_reg=reg_rdata;
  return 0;
}

static inline U32 wait_for_state_ready(loop_condition_fp fp,U32 timeout_us,volatile U32 *wacs_register,U32 *read_reg)
{

  U64 start_time_ns=0, timeout_ns=0;
  U32 reg_rdata;
  start_time_ns = _pwrap_get_current_time();
  timeout_ns = _pwrap_time2ns(timeout_us);
  do
  {
	if (_pwrap_timeout_ns(start_time_ns, timeout_ns))
    {
      PWRAPERR("timeout when waiting for idle\n");
      pwrap_dump_ap_register();
      return E_PWR_WAIT_IDLE_TIMEOUT;
    }

    reg_rdata = WRAP_RD32(wacs_register);

    if( GET_INIT_DONE0( reg_rdata ) != WACS_INIT_DONE)
    {
      PWRAPERR("initialization isn't finished \n");
      return E_PWR_NOT_INIT_DONE;
    }
  } while( fp(reg_rdata)); //IDLE State
  if(read_reg)
   *read_reg=reg_rdata;
  return 0;
}
//******************************************************************************
//--external API for pmic_wrap user-------------------------------------------------
//******************************************************************************
S32 pwrap_read( U32  adr, U32 *rdata )
{
  return pwrap_wacs2( 0, adr,0,rdata );
}

S32 pwrap_write( U32  adr, U32  wdata )
{
  return pwrap_wacs2( 1, adr,wdata,0 );
}
//--------------------------------------------------------
//    Function : pwrap_wacs2()
// Description :
//   Parameter :
//      Return :
//--------------------------------------------------------
S32 pwrap_wacs2( U32  write, U32  adr, U32  wdata, U32 *rdata )
{
  U32 reg_rdata=0;
  U32 wacs_write=0;
  U32 wacs_adr=0;
  U32 wacs_cmd=0;
  U32 return_value=0;

  //struct pmic_wrap_obj *pwrap_obj = g_pmic_wrap_obj;
  //if (!pwrap_obj)
  //      PWRAPERR("NULL pointer\n");
  //PWRAPFUC();
  //PWRAPLOG("wrapper access,write=%x,add=%x,wdata=%x,rdata=%x\n",write,adr,wdata,rdata);

  // Check argument validation
  if( (write & ~(0x1))    != 0)  return E_PWR_INVALID_RW;
  if( (adr   & ~(0xffff)) != 0)  return E_PWR_INVALID_ADDR;
  if( (wdata & ~(0xffff)) != 0)  return E_PWR_INVALID_WDAT;

  //spin_lock_irqsave(&pwrap_obj->spin_lock,flags);
  // Check IDLE & INIT_DONE in advance
  return_value=wait_for_state_idle(wait_for_fsm_idle,TIMEOUT_WAIT_IDLE,PMIC_WRAP_WACS2_RDATA,PMIC_WRAP_WACS2_VLDCLR,0);
  if(return_value!=0)
  {
    PWRAPERR("wait_for_fsm_idle fail,return_value=%d\n",return_value);
    goto FAIL;
  }
  wacs_write  = write << 31;
  wacs_adr    = (adr >> 1) << 16;
  wacs_cmd = wacs_write | wacs_adr | wdata;

  WRAP_WR32(PMIC_WRAP_WACS2_CMD,wacs_cmd);
  if( write == 0 )
  {
    if (NULL == rdata)
    {
      PWRAPERR("rdata is a NULL pointer\n");
      return_value= E_PWR_INVALID_ARG;
      goto FAIL;
    }
    return_value=wait_for_state_ready(wait_for_fsm_vldclr,TIMEOUT_READ,PMIC_WRAP_WACS2_RDATA,&reg_rdata);
    if(return_value!=0)
    {
      PWRAPERR("wait_for_fsm_vldclr fail,return_value=%d\n",return_value);
      return_value+=1;//E_PWR_NOT_INIT_DONE_READ or E_PWR_WAIT_IDLE_TIMEOUT_READ
      goto FAIL;
    }
    *rdata = GET_WACS0_RDATA( reg_rdata );
    WRAP_WR32(PMIC_WRAP_WACS2_VLDCLR , 1);
  }
FAIL:
  //spin_unlock_irqrestore(&pwrap_obj->spin_lock,flags);
  if(return_value!=0)
  {
    PWRAPERR("pwrap_wacs2 fail,return_value=%d\n",return_value);
    PWRAPERR("timeout:BUG_ON here\n");
    //BUG_ON(1);
  }
  //wrap_access_time=_pwrap_get_current_time();
  //pwrap_trace(wrap_access_time,return_value,write, adr, wdata,rdata);
  return return_value;
}
//******************************************************************************
//--internal API for pwrap_init-------------------------------------------------
//******************************************************************************

//--------------------------------------------------------
//    Function : _pwrap_wacs2_nochk()
// Description :
//   Parameter :
//      Return :
//--------------------------------------------------------
static S32 pwrap_read_nochk( U32  adr, U32 *rdata )
{
  return _pwrap_wacs2_nochk( 0, adr,  0, rdata );
}

static S32 pwrap_write_nochk( U32  adr, U32  wdata )
{
  return _pwrap_wacs2_nochk( 1, adr,wdata,0 );
}

static S32 _pwrap_wacs2_nochk( U32 write, U32 adr, U32 wdata, U32 *rdata )
{
  U32 reg_rdata=0x0;
  U32 wacs_write=0x0;
  U32 wacs_adr=0x0;
  U32 wacs_cmd=0x0;
  U32 return_value=0x0;
  //PWRAPFUC();
  // Check argument validation
  if( (write & ~(0x1))    != 0)  return E_PWR_INVALID_RW;
  if( (adr   & ~(0xffff)) != 0)  return E_PWR_INVALID_ADDR;
  if( (wdata & ~(0xffff)) != 0)  return E_PWR_INVALID_WDAT;

  // Check IDLE
  return_value=wait_for_state_ready_init(wait_for_fsm_idle,TIMEOUT_WAIT_IDLE,PMIC_WRAP_WACS2_RDATA,0);
  if(return_value!=0)
  {
    PWRAPERR("_pwrap_wacs2_nochk write command fail,return_value=%x\n", return_value);
    return return_value;
  }
  wacs_write  = write << 31;
  wacs_adr    = (adr >> 1) << 16;
  wacs_cmd= wacs_write | wacs_adr | wdata;
  WRAP_WR32(PMIC_WRAP_WACS2_CMD,wacs_cmd);

  if( write == 0 )
  {
    if (NULL == rdata)
    {
      PWRAPERR("rdata is a NULL pointer\n");
      return_value= E_PWR_INVALID_ARG;
      return return_value;
    }
    return_value=wait_for_state_ready_init(wait_for_fsm_vldclr,TIMEOUT_READ,PMIC_WRAP_WACS2_RDATA,&reg_rdata);
    if(return_value!=0)
    {
      PWRAPERR("wait_for_fsm_vldclr fail,return_value=%d\n",return_value);
      return_value+=1;//E_PWR_NOT_INIT_DONE_READ or E_PWR_WAIT_IDLE_TIMEOUT_READ
      return return_value;
      }
    *rdata = GET_WACS0_RDATA( reg_rdata );
    WRAP_WR32(PMIC_WRAP_WACS2_VLDCLR , 1);
  }
  return 0;
}
//--------------------------------------------------------
//    Function : _pwrap_init_dio()
// Description :call it in pwrap_init,mustn't check init done
//   Parameter :
//      Return :
//--------------------------------------------------------
static S32 _pwrap_init_dio( U32 dio_en )
{
  U32 arb_en_backup=0x0;
  U32 rdata=0x0;
  U32 return_value=0;

  //PWRAPFUC();
  arb_en_backup = WRAP_RD32(PMIC_WRAP_HIPRIO_ARB_EN);
  WRAP_WR32(PMIC_WRAP_HIPRIO_ARB_EN , WACS2); // only WACS2
#ifdef SLV_6328  
	  pwrap_write_nochk(MT6328_DEW_DIO_EN, (dio_en));
#endif
#ifdef SLV_6332  
	  pwrap_write_nochk(MT6332_DEW_DIO_EN, (dio_en>>1));
#endif  

  // Check IDLE & INIT_DONE in advance
  return_value=wait_for_state_ready_init(wait_for_idle_and_sync,TIMEOUT_WAIT_IDLE,PMIC_WRAP_WACS2_RDATA,0);
  if(return_value!=0)
  {
    PWRAPERR("_pwrap_init_dio fail,return_value=%x\n", return_value);
    return return_value;
  }
  //enable AP DIO mode
  WRAP_WR32(PMIC_WRAP_DIO_EN , dio_en);
  // Read Test
#ifdef SLV_6328  
	  pwrap_read_nochk(MT6328_DEW_READ_TEST, &rdata);
	  if( rdata != MT6328_DEFAULT_VALUE_READ_TEST )
	  {
		PWRAPERR("[Dio_mode][Read Test] fail,dio_en = %x, READ_TEST rdata=%x, exp=0x5aa5\n", dio_en, rdata);
		return E_PWR_READ_TEST_FAIL;
	  }
#endif
#ifdef SLV_6332  
	  pwrap_read_nochk(MT6332_DEW_READ_TEST, &rdata);
	  if( rdata != MT6332_DEFAULT_VALUE_READ_TEST )
	  {
		PWRAPERR("[Dio_mode][Read Test] fail,dio_en = %x, READ_TEST rdata=%x, exp=0xa55a\n", dio_en, rdata);
		return E_PWR_READ_TEST_FAIL;
	  }
#endif
  WRAP_WR32(PMIC_WRAP_HIPRIO_ARB_EN , arb_en_backup);
  return 0;
}

//--------------------------------------------------------
//    Function : _pwrap_init_cipher()
// Description :
//   Parameter :
//      Return :
//--------------------------------------------------------
static S32 _pwrap_init_cipher( void )
{
  U32 arb_en_backup=0;
	U32 rdata=0;
	U32 return_value=0;
	U32 start_time_ns=0, timeout_ns=0;
	//PWRAPFUC();
	arb_en_backup = WRAP_RD32(PMIC_WRAP_HIPRIO_ARB_EN);

	WRAP_WR32(PMIC_WRAP_HIPRIO_ARB_EN ,WACS2); // only WACS0

	WRAP_WR32(PMIC_WRAP_CIPHER_SWRST ,  1);
	WRAP_WR32(PMIC_WRAP_CIPHER_SWRST ,  0);
	WRAP_WR32(PMIC_WRAP_CIPHER_KEY_SEL , 1);
	WRAP_WR32(PMIC_WRAP_CIPHER_IV_SEL  , 2);
	WRAP_WR32(PMIC_WRAP_CIPHER_EN   , 1);

	//Config CIPHER @ PMIC
#ifdef SLV_6328 
	pwrap_write_nochk(MT6328_DEW_CIPHER_SWRST, 0x1);
	pwrap_write_nochk(MT6328_DEW_CIPHER_SWRST, 0x0);
	pwrap_write_nochk(MT6328_DEW_CIPHER_KEY_SEL, 0x1);
	pwrap_write_nochk(MT6328_DEW_CIPHER_IV_SEL,  0x2);
	pwrap_write_nochk(MT6328_DEW_CIPHER_EN,  0x1);
#endif
#ifdef SLV_6332
	pwrap_write_nochk(MT6332_DEW_CIPHER_SWRST,   0x1);
	pwrap_write_nochk(MT6332_DEW_CIPHER_SWRST,   0x0);
	pwrap_write_nochk(MT6332_DEW_CIPHER_KEY_SEL, 0x1);
	pwrap_write_nochk(MT6332_DEW_CIPHER_IV_SEL,  0x2);
	pwrap_write_nochk(MT6332_DEW_CIPHER_EN,	0x1);
#endif	

    PWRAPLOG("mt_pwrap_init---- debug7\n");    
    
	//wait for cipher data ready@AP
	return_value=wait_for_state_ready_init(wait_for_cipher_ready,TIMEOUT_WAIT_IDLE,PMIC_WRAP_CIPHER_RDY,0);
	if(return_value!=0)
	{
		PWRAPERR("wait for cipher data ready@AP fail,return_value=%x\n", return_value);
		return return_value;
	}
    PWRAPLOG("mt_pwrap_init---- debug8\n"); 
	
	//wait for cipher data ready@PMIC
#ifdef SLV_6328 
	start_time_ns = _pwrap_get_current_time();
	timeout_ns = _pwrap_time2ns(0xFFFFFF);
	do
	{
		if (_pwrap_timeout_ns(start_time_ns, timeout_ns))
		{
			PWRAPERR("wait for cipher data ready@PMIC\n");
			//pwrap_dump_all_register();
			//return E_PWR_WAIT_IDLE_TIMEOUT;
		}
		pwrap_read_nochk(MT6328_DEW_CIPHER_RDY,&rdata);
	} while( rdata != 0x1 ); //cipher_ready

	pwrap_write_nochk(MT6328_DEW_CIPHER_MODE, 0x1);
	PWRAPLOG("mt_pwrap_init---- debug9\n");
#endif
#ifdef SLV_6332
	start_time_ns = _pwrap_get_current_time();
	timeout_ns = _pwrap_time2ns(0xFFFFFF);
	do
	{
		if (_pwrap_timeout_ns(start_time_ns, timeout_ns))
		{
			PWRAPERR("wait for cipher data ready@PMIC\n");
			//pwrap_dump_all_register();
			//return E_PWR_WAIT_IDLE_TIMEOUT;
		}
		pwrap_read_nochk(MT6332_DEW_CIPHER_RDY,&rdata);
	} while( rdata != 0x1 ); //cipher_ready

	pwrap_write_nochk(MT6332_DEW_CIPHER_MODE, 0x1);
#endif
	//wait for cipher mode idle
	return_value=wait_for_state_ready_init(wait_for_idle_and_sync,TIMEOUT_WAIT_IDLE,PMIC_WRAP_WACS2_RDATA,0);
	if(return_value!=0)
	{
		PWRAPERR("wait for cipher mode idle fail,return_value=%x\n", return_value);
		return return_value;
	}
	WRAP_WR32(PMIC_WRAP_CIPHER_MODE , 1);

	// Read Test
#ifdef SLV_6328  
	  pwrap_read_nochk(MT6328_DEW_READ_TEST, &rdata);
	  if( rdata != MT6328_DEFAULT_VALUE_READ_TEST )
	  {
		PWRAPERR("_pwrap_init_cipher,read test error,error code=%x, rdata=%x\n", 1, rdata);
		return E_PWR_READ_TEST_FAIL;
	  }
#endif
#ifdef SLV_6332  
	  pwrap_read_nochk(MT6332_DEW_READ_TEST, &rdata);
	  if( rdata != MT6332_DEFAULT_VALUE_READ_TEST )
	  {
		PWRAPERR("_pwrap_init_cipher,read test error,error code=%x, rdata=%x\n", 1, rdata);
		return E_PWR_READ_TEST_FAIL;
	  }
#endif  

	WRAP_WR32(PMIC_WRAP_HIPRIO_ARB_EN , arb_en_backup);
	return 0;
}

//--------------------------------------------------------
//    Function : _pwrap_init_sistrobe()
// Description : Initialize SI_CK_CON and SIDLY
//   Parameter :
//      Return :
//--------------------------------------------------------
static S32 _pwrap_init_sistrobe( void )
{
	U32 arb_en_backup=0;
	U32 rdata=0;
	U32 i=0;
	S32 ind=0; 
	U32 tmp1=0;
	U32 tmp2=0;
	U32 result_faulty=0;
	U32 result[2]={0,0};
	S32 leading_one[2]={-1,-1};
	S32 tailing_one[2]={-1,-1};

	arb_en_backup = WRAP_RD32(PMIC_WRAP_HIPRIO_ARB_EN);

	WRAP_WR32(PMIC_WRAP_HIPRIO_ARB_EN ,WACS2); // only WACS2

	//---------------------------------------------------------------------
	// Scan all possible input strobe by READ_TEST
	//---------------------------------------------------------------------
	for( ind=0; ind<24; ind++)  // 24 sampling clock edge
	{
		WRAP_WR32(PMIC_WRAP_SI_CK_CON , (ind >> 2) & 0x7);
		WRAP_WR32(PMIC_WRAP_SIDLY ,0x3 - (ind & 0x3));
#ifdef SLV_6328    
			_pwrap_wacs2_nochk(0, MT6328_DEW_READ_TEST, 0, &rdata);
			if( rdata == MT6328_DEFAULT_VALUE_READ_TEST ) {
				 PWRAPLOG("_pwrap_init_sistrobe [Read Test of MT6328] pass,index=%d rdata=%x\n", ind,rdata);
     			 result[0] |= (0x1 << ind);
    		}else {
				 PWRAPLOG("_pwrap_init_sistrobe [Read Test of MT6328] tuning,index=%d rdata=%x\n", ind,rdata);
			}
#endif
#ifdef SLV_6332
			_pwrap_wacs2_nochk(0, MT6332_DEW_READ_TEST, 0, &rdata);
			if( rdata == MT6332_DEFAULT_VALUE_READ_TEST ) {
				PWRAPLOG("_pwrap_init_sistrobe [Read Test of MT6332] pass,index=%d rdata=%x\n", ind,rdata);
				result[1] |= (0x1 << ind);
			}else {
				 PWRAPLOG("_pwrap_init_sistrobe [Read Test of MT6332] tuning,index=%d rdata=%x\n", ind,rdata);
			}
#endif  
	 }
#ifndef SLV_6328
	  result[0] = result[1];
#endif
#ifndef SLV_6332
	  result[1] = result[0];
#endif
	 //---------------------------------------------------------------------
  	// Locate the leading one and trailing one of PMIC 1/2
  	//---------------------------------------------------------------------
	for( ind=23 ; ind>=0 ; ind-- )
	{
	  if( (result[0] & (0x1 << ind)) && leading_one[0] == -1){
		  leading_one[0] = ind;
	  }
	  if(leading_one[0] > 0) { break;}
	}
	for( ind=23 ; ind>=0 ; ind-- )
	{
	  if( (result[1] & (0x1 << ind)) && leading_one[1] == -1){
		  leading_one[1] = ind;
	  }
	  if(leading_one[1] > 0) { break;}
	}  
	
	for( ind=0 ; ind<24 ; ind++ )
	{
	  if( (result[0] & (0x1 << ind)) && tailing_one[0] == -1){
		  tailing_one[0] = ind;
	  }
	  if(tailing_one[0] > 0) { break;}
	}
	for( ind=0 ; ind<24 ; ind++ )
	{
	  if( (result[1] & (0x1 << ind)) && tailing_one[1] == -1){
		  tailing_one[1] = ind;
	  }
	  if(tailing_one[1] > 0) { break;}
	}  

  	//---------------------------------------------------------------------
  	// Check the continuity of pass range
  	//---------------------------------------------------------------------
  	for( i=0; i<2; i++)
  	{
    	tmp1 = (0x1 << (leading_one[i]+1)) - 1;
    	tmp2 = (0x1 << tailing_one[i]) - 1;
    	if( (tmp1 - tmp2) != result[i] )
    	{
    		/*TERR = "[DrvPWRAP_InitSiStrobe] Fail at PMIC %d, result = %x, leading_one:%d, tailing_one:%d"
    	         	 , i+1, result[i], leading_one[i], tailing_one[i]*/
    	    PWRAPERR("_pwrap_init_sistrobe Fail at PMIC %d, result = %x, leading_one:%d, tailing_one:%d\n", i+1, result[i], leading_one[i], tailing_one[i]);
      		result_faulty = 0x1;
    	}
  	}
	
	//---------------------------------------------------------------------
	// Config SICK and SIDLY to the middle point of pass range
	//---------------------------------------------------------------------
	if( result_faulty == 0 )
    {
  		// choose the best point in the interaction of PMIC1's pass range and PMIC2's pass range
    	ind = ( (leading_one[0] + tailing_one[0])/2 + (leading_one[1] + tailing_one[1])/2 )/2;
        /*TINFO = "The best point in the interaction area is %d, ind"*/ 
		WRAP_WR32(PMIC_WRAP_SI_CK_CON , (ind >> 2) & 0x7);
		WRAP_WR32(PMIC_WRAP_SIDLY , 0x3 - (ind & 0x3));		
		//---------------------------------------------------------------------
		// Restore
		//---------------------------------------------------------------------
		WRAP_WR32(PMIC_WRAP_HIPRIO_ARB_EN , arb_en_backup);
		return 0;
	}
	else
	{
		PWRAPERR("_pwrap_init_sistrobe Fail,result_faulty=%x\n", result_faulty);
		return result_faulty;
	}
}

//--------------------------------------------------------
//    Function : _pwrap_reset_spislv()
// Description :
//   Parameter :
//      Return :
//--------------------------------------------------------
static S32 _pwrap_reset_spislv( void )
{
    U32 ret=0;
	U32 return_value=0;
	//PWRAPFUC();
	// This driver does not using _pwrap_switch_mux
	// because the remaining requests are expected to fail anyway

	WRAP_WR32(PMIC_WRAP_HIPRIO_ARB_EN , DISABLE_ALL);
	WRAP_WR32(PMIC_WRAP_WRAP_EN , DISABLE);
	WRAP_WR32(PMIC_WRAP_MUX_SEL , MANUAL_MODE);
	WRAP_WR32(PMIC_WRAP_MAN_EN ,ENABLE);
	WRAP_WR32(PMIC_WRAP_DIO_EN ,DISABLE);

	WRAP_WR32(PMIC_WRAP_MAN_CMD , (OP_WR << 13) | (OP_CSL  << 8));//0x2100
	WRAP_WR32(PMIC_WRAP_MAN_CMD , (OP_WR << 13) | (OP_OUTS << 8)); //0x2800//to reset counter
	WRAP_WR32(PMIC_WRAP_MAN_CMD , (OP_WR << 13) | (OP_CSH  << 8));//0x2000
	WRAP_WR32(PMIC_WRAP_MAN_CMD , (OP_WR << 13) | (OP_OUTS << 8));
	WRAP_WR32(PMIC_WRAP_MAN_CMD , (OP_WR << 13) | (OP_OUTS << 8));
	WRAP_WR32(PMIC_WRAP_MAN_CMD , (OP_WR << 13) | (OP_OUTS << 8));
	WRAP_WR32(PMIC_WRAP_MAN_CMD , (OP_WR << 13) | (OP_OUTS << 8));

	return_value=wait_for_state_ready_init(wait_for_sync,TIMEOUT_WAIT_IDLE,PMIC_WRAP_WACS2_RDATA,0);
	if(return_value!=0)
	{
		PWRAPERR("_pwrap_reset_spislv fail,return_value=%x\n", return_value);
		ret=E_PWR_TIMEOUT;
		goto timeout;
	}

	WRAP_WR32(PMIC_WRAP_MAN_EN ,DISABLE);
	WRAP_WR32(PMIC_WRAP_MUX_SEL ,WRAPPER_MODE);

timeout:
	WRAP_WR32(PMIC_WRAP_MAN_EN ,DISABLE);
	WRAP_WR32(PMIC_WRAP_MUX_SEL ,WRAPPER_MODE);
	return ret;
}

static void __pwrap_soft_reset(void)
{
	PWRAPLOG("start reset wrapper\n");
	//PWRAP_SOFT_RESET;
	WRAP_WR32(INFRA_GLOBALCON_RST0,0x80);

	PWRAPLOG("the reset register =%x\n",WRAP_RD32(INFRA_GLOBALCON_RST0));
	PWRAPLOG("PMIC_WRAP_STAUPD_GRPEN =0x%x,it should be equal to 0xc\n",WRAP_RD32(PMIC_WRAP_STAUPD_GRPEN));
	//clear reset bit
	//PWRAP_CLEAR_SOFT_RESET_BIT;
	WRAP_WR32(INFRA_GLOBALCON_RST1,0x80);
	return;
}

static S32 _pwrap_init_signature( U8 path )
{
	int ret=0;
	U32 rdata=0x0;
	PWRAPFUC();

	if(path == 1){
		//###############################
		// Signature Checking - Using Write Test Register
		// should be the last to modify WRITE_TEST
		//###############################
		_pwrap_wacs2_nochk(1, MT6328_DEW_WRITE_TEST, 0x5678, &rdata);
		WRAP_WR32(PMIC_WRAP_SIG_ADR,MT6328_DEW_WRITE_TEST);
		WRAP_WR32(PMIC_WRAP_SIG_VALUE,0x5678);
		WRAP_WR32(PMIC_WRAP_SIG_MODE, 0x1);
	}else{
		//###############################
		 // Signature Checking using CRC and EINT update
		// should be the last to modify WRITE_TEST
		//###############################
#ifdef SLV_6328  
		  ret = pwrap_write_nochk(MT6328_DEW_CRC_EN, ENABLE);
		  if( ret != 0 )
		  {
			PWRAPERR("MT6328 enable CRC fail,ret=%x\n", ret);
			return E_PWR_INIT_ENABLE_CRC;
		  }
		  WRAP_WR32(PMIC_WRAP_SIG_ADR,WRAP_RD32(PMIC_WRAP_SIG_ADR)|MT6328_DEW_CRC_VAL);
		  //WRAP_WR32(PMIC_WRAP_EINT_STA0_ADR,MT6328_INT_STA);
		  WRAP_WR32(PMIC_WRAP_STAUPD_GRPEN,WRAP_RD32(PMIC_WRAP_STAUPD_GRPEN)|0x35);
#endif  
#ifdef SLV_6332  
		  ret = pwrap_write_nochk(MT6332_DEW_CRC_EN, ENABLE);
		  if( ret != 0 )
		  {
			 PWRAPERR("MT6332 enable CRC fail,ret=%x\n", ret);
			 return E_PWR_INIT_ENABLE_CRC;
		  }
		  WRAP_WR32(PMIC_WRAP_SIG_ADR,WRAP_RD32(PMIC_WRAP_SIG_ADR)|(MT6332_DEW_CRC_VAL<<16));
		  WRAP_WR32(PMIC_WRAP_EINT_STA1_ADR,MT6332_INT_STA);
		  WRAP_WR32(PMIC_WRAP_STAUPD_GRPEN,WRAP_RD32(PMIC_WRAP_STAUPD_GRPEN)|0xa);
#endif  
	}
	WRAP_WR32(PMIC_WRAP_CRC_EN, ENABLE);
	return 0;
}

static S32 _pwrap_init_reg_clock( U32 regck_sel )
{
  //U32 wdata=0;
	//U32 rdata=0;
	PWRAPFUC();
	
	// Set Dummy cycle 6328 and 6332 (assume 12MHz)
#ifdef SLV_6328
	  pwrap_write_nochk(MT6328_DEW_RDDMY_NO, 0x8);
#endif
#ifdef SLV_6332  
	  pwrap_write_nochk(MT6332_DEW_RDDMY_NO, 0x8);
#endif  
	WRAP_WR32(PMIC_WRAP_RDDMY ,0x88);

	// Config SPI Waveform according to reg clk
	if( regck_sel == 1 ) { // 6MHz in 6323  => no support ; 18MHz in 6320
		
		WRAP_WR32(PMIC_WRAP_CSHEXT_READ    , 0x0);  // for 6320, slave need enough time (4T of PMIC reg_ck) to back idle state
		WRAP_WR32(PMIC_WRAP_CSHEXT_WRITE   , 0x33);// wait data written into register => 3T_PMIC: consists of CSLEXT_END(1T) + CSHEXT(6T)
		WRAP_WR32(PMIC_WRAP_CSLEXT_START   , 0x0);
		WRAP_WR32(PMIC_WRAP_CSLEXT_END   , 0x0);
	
	} else { //Safe mode
		WRAP_WR32(PMIC_WRAP_CSHEXT_WRITE   , 0xff);
		WRAP_WR32(PMIC_WRAP_CSHEXT_READ    , 0xff);
		WRAP_WR32(PMIC_WRAP_CSLEXT_START   , 0xf);
		WRAP_WR32(PMIC_WRAP_CSLEXT_END   , 0xf);
	}

	return 0;
}


static U32 pwrap_read_test(void)
{
	U32 rdata=0;
	U32 return_value=0;
	// Read Test
#ifdef SLV_6328
	return_value=pwrap_read(MT6328_DEW_READ_TEST,&rdata);
	if( rdata != MT6328_DEFAULT_VALUE_READ_TEST )
	{
		PWRAPREG("Read Test fail,rdata=0x%x, exp=0x5aa5,return_value=0x%x\n", rdata,return_value);
		return E_PWR_READ_TEST_FAIL;
	}
	else
	{
		PWRAPREG("Read 6328 Test pass,return_value=%d\n",return_value);
		//return 0;
	}
#endif
#ifdef SLV_6332
	return_value=pwrap_read(MT6332_DEW_READ_TEST,&rdata);
	if( rdata != MT6332_DEFAULT_VALUE_READ_TEST )
	{
		PWRAPREG("Read Test fail,rdata=0x%x, exp=0x5aa5,return_value=0x%x\n", rdata,return_value);
		return E_PWR_READ_TEST_FAIL;
	}
	else
	{
		PWRAPREG("Read Test pass,return_value=%d\n",return_value);
		return 0;
	}
#endif
	return 0;
}
static U32 pwrap_write_test(void)
{
	U32 rdata=0;
	U32 sub_return=0;
	U32 sub_return1=0;
	//###############################
	// Write test using WACS2
	//###############################
#ifdef SLV_6328
	sub_return = pwrap_write(MT6328_DEW_WRITE_TEST, MT6328_WRITE_TEST_VALUE);
	PWRAPREG("after MT6328 pwrap_write\n");
	sub_return1 = pwrap_read(MT6328_DEW_WRITE_TEST,&rdata);
	if(( rdata != MT6328_WRITE_TEST_VALUE )||( sub_return != 0 )||( sub_return1 != 0 ))
	{
		PWRAPREG("write test error,rdata=0x%x,exp=0xa55a,sub_return=0x%x,sub_return1=0x%x\n", rdata,sub_return,sub_return1);
		return E_PWR_INIT_WRITE_TEST;
	}
	else
	{
		PWRAPREG("write MT6328 Test pass\n");
		//return 0;
	}
#endif
#ifdef SLV_6332
	sub_return = pwrap_write(MT6332_DEW_WRITE_TEST, MT6332_WRITE_TEST_VALUE);
	PWRAPREG("after MT6332 pwrap_write\n");
	sub_return1 = pwrap_read(MT6332_DEW_WRITE_TEST,&rdata);
	if(( rdata != MT6332_WRITE_TEST_VALUE )||( sub_return != 0 )||( sub_return1 != 0 ))
	{
		PWRAPREG("write test error,rdata=0x%x,exp=0xa55a,sub_return=0x%x,sub_return1=0x%x\n", rdata,sub_return,sub_return1);
		return E_PWR_INIT_WRITE_TEST;
	}
	else
	{
		PWRAPREG("write MT6332 Test pass\n");
		return 0;
	}
#endif
	return 0;
}

static void pwrap_ut(U32 ut_test)
{
	switch(ut_test)
	{
		case 1:
			//pwrap_wacs2_para_test();
			pwrap_write_test();
			break;
		case 2:
			//pwrap_wacs2_para_test();
			pwrap_read_test();
			break;

		default:
			PWRAPREG ( "default test.\n" );
			break;
	}
	return;
}

S32 pwrap_init ( void )
{
  S32 sub_return=0;
  S32 sub_return1=0;
  U32 rdata=0x0;

  PWRAPFUC();
  //###############################
  //toggle PMIC_WRAP and pwrap_spictl reset
  //###############################
  //WRAP_SET_BIT(0x80,INFRA_GLOBALCON_RST0);
  //WRAP_CLR_BIT(0x80,INFRA_GLOBALCON_RST0);
  __pwrap_soft_reset();
    PWRAPLOG("mt_pwrap_init---- debug3\n");
  //###############################
  // Set SPI_CK_freq = 26MHz for both 6320/6323
  //###############################
  //WRAP_WR32(PMIC_WRAP_RDDMY,0xf);
  WRAP_WR32(CLK_CFG_4_CLR,CLK_SPI_CK_26M);

  //###############################
  //toggle PERI_PWRAP_BRIDGE reset
  //###############################
  //WRAP_SET_BIT(0x04,PERI_GLOBALCON_RST1);
  //WRAP_CLR_BIT(0x04,PERI_GLOBALCON_RST1);

  //###############################
  //Enable DCM
  //###############################
  WRAP_WR32(PMIC_WRAP_DCM_EN , 3);//enable CRC DCM and Pwrap DCM
  WRAP_WR32(PMIC_WRAP_DCM_DBC_PRD ,DISABLE); //no debounce
    PWRAPLOG("mt_pwrap_init---- debug4\n");
  //###############################
  //Reset SPISLV
  //###############################
  sub_return=_pwrap_reset_spislv();
  if( sub_return != 0 )
  {
    PWRAPERR("error,_pwrap_reset_spislv fail,sub_return=%x\n",sub_return);
    return E_PWR_INIT_RESET_SPI;
  }
  //###############################
  // Enable WACS2
  //###############################
  WRAP_WR32(PMIC_WRAP_WRAP_EN,ENABLE);//enable wrap
  WRAP_WR32(PMIC_WRAP_HIPRIO_ARB_EN,WACS2); //Only WACS2
  WRAP_WR32(PMIC_WRAP_WACS2_EN,ENABLE);
  PWRAPLOG("mt_pwrap_init---- debug5\n");
  //###############################
  // Input data calibration flow;
  //###############################
  sub_return = _pwrap_init_sistrobe();
  if( sub_return != 0 )
  {
    PWRAPERR("error,DrvPWRAP_InitSiStrobe fail,sub_return=%x\n",sub_return);
    return E_PWR_INIT_SIDLY;
  }
  PWRAPLOG("mt_pwrap_init---- debug6\n");
  //###############################
  // SPI Waveform Configuration
  //###############################
	//0:safe mode, 1:18MHz
  sub_return = _pwrap_init_reg_clock(1);
  if( sub_return != 0)
  {
    PWRAPERR("error,_pwrap_init_reg_clock fail,sub_return=%x\n",sub_return);
    return E_PWR_INIT_REG_CLOCK;
  }

  //###############################
  // Enable DIO mode
  //###############################
  //PMIC2 dual io not ready
	///TODO: Fix me //for early porting
#if 1
	sub_return = _pwrap_init_dio(1);
	if( sub_return != 0 )
	{
		PWRAPERR("_pwrap_init_dio test error,error code=%x, sub_return=%x\n", 0x11, sub_return);
		return E_PWR_INIT_DIO;
	}
#endif
  //###############################
  // Enable Encryption
  //###############################
  PWRAPLOG("have cipher\n");
  sub_return = _pwrap_init_cipher();
  if( sub_return != 0 )
  {
    PWRAPERR("Enable Encryption fail, return=%x\n", sub_return);
    return E_PWR_INIT_CIPHER;
  }
  
  //###############################
  // Write test using WACS2
  //###############################
 //check Wtiet test default value
#ifdef SLV_6328
   sub_return = pwrap_write_nochk(MT6328_DEW_WRITE_TEST, MT6328_WRITE_TEST_VALUE);
   sub_return1 = pwrap_read_nochk(MT6328_DEW_WRITE_TEST, &rdata);
   if( rdata != MT6328_WRITE_TEST_VALUE )  {
		PWRAPERR("write test error,rdata=0x%x,exp=0xa55a,sub_return=0x%x,sub_return1=0x%x\n", rdata,sub_return,sub_return1);
		return E_PWR_INIT_WRITE_TEST;
   }
#endif
#ifdef SLV_6332
	  sub_return = pwrap_write_nochk(MT6332_DEW_WRITE_TEST, MT6332_WRITE_TEST_VALUE);
	  sub_return1 = pwrap_read_nochk(MT6332_DEW_WRITE_TEST, &rdata);
	  if( rdata != MT6332_WRITE_TEST_VALUE )  {
		PWRAPERR("write test error,rdata=0x%x,exp=0xa55a,sub_return=0x%x,sub_return1=0x%x\n", rdata,sub_return,sub_return1);
		return E_PWR_INIT_WRITE_TEST;
	  }
#endif

  //###############################
  // Signature Checking - Using CRC
  // should be the last to modify WRITE_TEST
  //###############################
	 PWRAPLOG("mt_pwrap_init---- debug10\n");
///TODO: Fix me //for early porting  really no need?

  #if 0
  sub_return = _pwrap_init_signature(0);
  if( sub_return != 0 )
  {
	 PWRAPERR("Enable CRC fail, return=%x\n", sub_return);
	 return E_PWR_INIT_ENABLE_CRC;
  }
 #endif
#if 1
    // ADC init
    WRAP_WR32(PMIC_WRAP_ADC_CMD_ADDR,MT6328_AUXADC_RQST1_SET);
    WRAP_WR32(PMIC_WRAP_PWRAP_ADC_CMD,0x0100);  
    WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR_LATEST , MT6328_AUXADC_ADC32);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR_WP     , MT6328_AUXADC_MDBG_1);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR0       , MT6328_AUXADC_BUF0);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR1       , MT6328_AUXADC_BUF1);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR2       , MT6328_AUXADC_BUF2);    
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR3       , MT6328_AUXADC_BUF3);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR4       , MT6328_AUXADC_BUF4);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR5       , MT6328_AUXADC_BUF5);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR6       , MT6328_AUXADC_BUF6);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR7       , MT6328_AUXADC_BUF7);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR8       , MT6328_AUXADC_BUF8);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR9       , MT6328_AUXADC_BUF9);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR10      , MT6328_AUXADC_BUF10);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR11      , MT6328_AUXADC_BUF11);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR12      , MT6328_AUXADC_BUF12);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR13      , MT6328_AUXADC_BUF13);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR14      , MT6328_AUXADC_BUF14);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR15      , MT6328_AUXADC_BUF15);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR16      , MT6328_AUXADC_BUF16);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR17      , MT6328_AUXADC_BUF17);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR18      , MT6328_AUXADC_BUF18);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR19      , MT6328_AUXADC_BUF19);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR20      , MT6328_AUXADC_BUF20);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR21      , MT6328_AUXADC_BUF21);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR22      , MT6328_AUXADC_BUF22);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR23      , MT6328_AUXADC_BUF23);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR24      , MT6328_AUXADC_BUF24);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR25      , MT6328_AUXADC_BUF25);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR26      , MT6328_AUXADC_BUF26);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR27      , MT6328_AUXADC_BUF27);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR28      , MT6328_AUXADC_BUF28);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR29      , MT6328_AUXADC_BUF29);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR30      , MT6328_AUXADC_BUF30);  
	WRAP_WR32(PMIC_WRAP_MD_ADC_RDATA_ADDR31      , MT6328_AUXADC_BUF31);


#endif

  // adc 6328 setting
  pwrap_write_nochk(MT6328_AUXADC_MDBG_0, (0x40|(1<<15)));
  pwrap_write_nochk(MT6328_AUXADC_MDRT_0, (0x40|(1<<15)));
  pwrap_write_nochk(MT6328_AUXADC_MDRT_2, 0x04);


  PWRAPLOG("mt_pwrap_init---- debug11 with adc &6328 adc\n");
  //###############################
  // PMIC_WRAP enables
  //###############################
  #if defined(MACH_TYPE_MT6735M)
  WRAP_WR32(PMIC_WRAP_HIPRIO_ARB_EN,0xff); //D2 change
  PWRAPLOG("mt_pwrap_init---- use D2\n");
  #else
  WRAP_WR32(PMIC_WRAP_HIPRIO_ARB_EN,0x3ff);
  #endif
  WRAP_WR32(PMIC_WRAP_WACS0_EN,ENABLE);
  WRAP_WR32(PMIC_WRAP_WACS1_EN,ENABLE);
  #if defined(MACH_TYPE_MT6735M)
  // not enable wacs3    D2 change
  #else
  WRAP_WR32(PMIC_WRAP_WACS3_EN,ENABLE);
  #endif
	PWRAPLOG("mt_pwrap_init---- debug12 ok \n");
	
	WRAP_WR32(PMIC_WRAP_STAUPD_PRD, 0x5);  //0x1:20us,for concurrence test,MP:0x5;  //100us
	WRAP_WR32(PMIC_WRAP_WDT_UNIT,0xf);
	WRAP_WR32(PMIC_WRAP_WDT_SRC_EN,0xfffffbff);
	WRAP_WR32(PMIC_WRAP_TIMER_EN,0x1);
	WRAP_WR32(PMIC_WRAP_INT_EN,0xfffffbff); 
	PWRAPLOG("mt_pwrap_init---- debug12++ \n");
	//no ok

	//###############################
	// Initialization Done
	//###############################
	WRAP_WR32(PMIC_WRAP_INIT_DONE0 ,ENABLE);
	WRAP_WR32(PMIC_WRAP_INIT_DONE2 , ENABLE);
    PWRAPLOG("mt_pwrap_init---- debug13\n");
	#if defined(MACH_TYPE_MT6735M)
	// not enable wacs3    D2 change
	#else
	WRAP_WR32(PMIC_WRAP_INIT_DONE3 , ENABLE);
	#endif

	
	//WRAP_WR32(PMIC_WRAP_INIT_DONE1 , ENABLE);
	
	PWRAPLOG("mt_pwrap_init---- debug14\n");
	WRAP_WR32(PMIC_WRAP_EINT_STA0_ADR,MT6328_INT_STA);

    PWRAPLOG("mt_pwrap_init---- debug15,%x\n",WRAP_RD32(PMIC_WRAP_EINT_STA0_ADR));
	pwrap_ut(1);
	pwrap_ut(2);
  return 0;
}

/*-pwrap debug--------------------------------------------------------------------------*/
void pwrap_dump_all_register(void)
{
  U32 i=0;
  U32 reg_addr=0;
  U32 reg_value=0;
  PWRAPREG("dump pwrap register\n");
  for(i=0;i<PMIC_WRAP_REG_RANGE;i++)
  {
    reg_addr=(PMIC_WRAP_BASE+i*4);
    reg_value=WRAP_RD32(reg_addr);
    dprintf(CRITICAL,"0x%x=0x%x\n",reg_addr,reg_value);
  }

}
void pwrap_dump_ap_register(void)
{
  U32 i=0;
  U32 reg_addr=0;
  U32 reg_value=0;
  PWRAPREG("dump pwrap register\n");
  for(i=0;i<PMIC_WRAP_REG_RANGE;i++)
  {
    reg_addr=(PMIC_WRAP_BASE+i*4);
    reg_value=WRAP_RD32(reg_addr);
    PWRAPREG("0x%x=0x%x\n",reg_addr,reg_value);
  }
  //PWRAPREG("elapse_time=%llx(ns)\n",elapse_time);
}

//#ifdef MACH_FPGA
S32 pwrap_init_lk ( void )
{
  u32 pwrap_ret=0,i=0;
  PWRAPFUC();
  for(i=0;i<3;i++)
  {
    pwrap_ret = pwrap_init();
    if(pwrap_ret!=0)
    {
      dprintf(CRITICAL,"[PMIC_WRAP]wrap_init fail,the return value=%x.\n",pwrap_ret);
    }
    else
    {
      dprintf(CRITICAL,"[PMIC_WRAP]wrap_init pass,the return value=%x.\n",pwrap_ret);
      break;//init pass
    }
  }
 return 0;
}


//--------------------------------------------------------
//    Function : _pwrap_status_update_test()
// Description :only for early porting
//   Parameter :
//      Return :
//--------------------------------------------------------
static S32 _pwrap_status_update_test_porting( void )
{
#if defined (SLV_6325) || defined (SLV_6332)
  U32 rdata;
#endif
  volatile U32 delay=1000*1000*1;
  PWRAPFUC();
  //disable signature interrupt
  WRAP_WR32(PMIC_WRAP_INT_EN,0x0);
#ifdef SLV_6325
  pwrap_write(MT6325_DEW_WRITE_TEST, MT6325_WRITE_TEST_VALUE);
  WRAP_WR32(PMIC_WRAP_SIG_ADR,MT6325_DEW_WRITE_TEST);
  WRAP_WR32(PMIC_WRAP_SIG_VALUE,0xAA55);
#endif
#ifdef SLV_6332
  pwrap_write(MT6332_DEW_WRITE_TEST, MT6332_WRITE_TEST_VALUE);
  WRAP_WR32(PMIC_WRAP_SIG_ADR,(MT6332_DEW_WRITE_TEST<<16)|WRAP_RD32(PMIC_WRAP_SIG_ADR));
  WRAP_WR32(PMIC_WRAP_SIG_VALUE,(0xAA55<<16)|WRAP_RD32(PMIC_WRAP_SIG_VALUE));
#endif
  WRAP_WR32(PMIC_WRAP_SIG_MODE, 0x1);

  //pwrap_delay_us(5000);//delay 5 seconds

  while(delay--);

#ifdef SLV_6325
  rdata=WRAP_RD32(PMIC_WRAP_SIG_ERRVAL);
  if( (rdata&0xFFFF) != MT6325_WRITE_TEST_VALUE )
  {
    PWRAPERR("MT6325 _pwrap_status_update_test error,error code=%x, rdata=%x\n", 1, (rdata&0xFFFF));
    //return 1;
  }
#endif
#ifdef SLV_6332
  rdata=WRAP_RD32(PMIC_WRAP_SIG_ERRVAL);
	if( (rdata>>16) != MT6332_WRITE_TEST_VALUE )
	{
	  PWRAPERR("MT6332 _pwrap_status_update_test error,error code=%x, rdata=%x\n", 1, (rdata>>16));
	  //return 1;
	}
#endif
#ifdef SLV_6325
  WRAP_WR32(PMIC_WRAP_SIG_VALUE,MT6325_WRITE_TEST_VALUE);//tha same as write test
#endif
#ifdef SLV_6332
	WRAP_WR32(PMIC_WRAP_SIG_VALUE,((MT6332_WRITE_TEST_VALUE<<16)|WRAP_RD32(PMIC_WRAP_SIG_VALUE)));//tha same as write test
#endif

  //clear sig_error interrupt flag bit
  WRAP_WR32(PMIC_WRAP_INT_CLR,1<<1);

  //enable signature interrupt
  WRAP_WR32(PMIC_WRAP_INT_EN,0x7ffffff9);
  WRAP_WR32(PMIC_WRAP_SIG_MODE, 0x0);
#ifdef SLV_6325
  WRAP_WR32(PMIC_WRAP_SIG_ADR, MT6325_DEW_CRC_VAL);
#endif
#ifdef SLV_6332
  WRAP_WR32(PMIC_WRAP_SIG_ADR, (MT6332_DEW_CRC_VAL<<16)|WRAP_RD32(PMIC_WRAP_SIG_ADR));
#endif
  return 0;
}

void pwrap_init_for_early_porting(void)
{
    int ret = 0;
    U32 res=0;
    PWRAPFUC();

  ret=_pwrap_status_update_test_porting();
    if(ret==0)
    {
      PWRAPLOG("wrapper_StatusUpdateTest pass.\n");
    }
    else
    {
      PWRAPLOG("error:wrapper_StatusUpdateTest fail.\n");
    res+=1;
    }

}
//#endif
#endif //endif PMIC_WRAP_NO_PMIC