mtk-lk/dev/lcm/RX_498HX_615B_82/RX_498HX_615B_82.c

/* Copyright Statement:
*
* This software/firmware and related documentation ("MediaTek Software") are
* protected under relevant copyright laws. The information contained herein
* is confidential and proprietary to MediaTek Inc. and/or its licensors.
* Without the prior written permission of MediaTek inc. and/or its licensors,
* any reproduction, modification, use or disclosure of MediaTek Software,
* and information contained herein, in whole or in part, shall be strictly prohibited.
*/
/* MediaTek Inc. (C) 2015. All rights reserved.
*
* BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
* THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
* CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
* SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
* STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
* CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*
* The following software/firmware and/or related documentation ("MediaTek Software")
* have been modified by MediaTek Inc. All revisions are subject to any receiver\'s
* applicable license agreements with MediaTek Inc.
*/
#ifndef BUILD_LK
#include <linux/string.h>
#else
#include <string.h>
#endif
#include "lcm_drv.h"

#ifdef BUILD_LK
	#include <platform/mt_gpio.h>
	#include <platform/mt_pmic.h>
#elif defined(BUILD_UBOOT)
	#include <asm/arch/mt_gpio.h>
#else
	#include <mach/mt_gpio.h>
	#include <mach/mt_pm_ldo.h>
#endif
#if defined(BUILD_LK)
#define LCM_DEBUG(fmt,arg...)  printf("[Eric][lk]""[%s]"fmt"\n",__func__,##arg)
#elif defined(BUILD_UBOOT)
#define LCM_DEBUG(fmt,arg...)  printf("[Eric][uboot]""[%s]"fmt"\n",__func__,##arg)
#else
#define LCM_DEBUG(fmt,arg...)  printk("[Eric][kernel]""[%s]"fmt"\n",__func__,##arg)
#endif

// ---------------------------------------------------------------------------
//  Local Constants
// ---------------------------------------------------------------------------

#define FRAME_WIDTH  										(480)
#define FRAME_HEIGHT 										(854)

// ---------------------------------------------------------------------------
//  Data ID
// ---------------------------------------------------------------------------

#define		DSI_DCS_SHORT_PACKET_ID_0			0x05
#define		DSI_DCS_SHORT_PACKET_ID_1			0x15
#define		DSI_DCS_LONG_PACKET_ID				0x39



// ---------------------------------------------------------------------------
//  Local Variables
// ---------------------------------------------------------------------------

static LCM_UTIL_FUNCS lcm_util = {0};

#define SET_RESET_PIN(v)    								(lcm_util.set_reset_pin((v)))

#define UDELAY(n) 											(lcm_util.udelay(n))
#define MDELAY(n) 											(lcm_util.mdelay(n))

#define REGFLAG_DELAY             							0XFE
#define REGFLAG_END_OF_TABLE      							0x100   // END OF REGISTERS MARKER

// ---------------------------------------------------------------------------
//  Local Functions
// ---------------------------------------------------------------------------

#define dsi_set_cmdq_V3(para_tbl, size, force_update)   	lcm_util.dsi_set_cmdq_V3(para_tbl, size, force_update)
#define dsi_set_cmdq_V2(cmd, count, ppara, force_update)	lcm_util.dsi_set_cmdq_V2(cmd, count, ppara, force_update)
#define dsi_set_cmdq(pdata, queue_size, force_update)		lcm_util.dsi_set_cmdq(pdata, queue_size, force_update)
#define wrtie_cmd(cmd)									lcm_util.dsi_write_cmd(cmd)
#define write_regs(addr, pdata, byte_nums)				lcm_util.dsi_write_regs(addr, pdata, byte_nums)
//#define read_reg(cmd)											lcm_util.DSI_dcs_read_lcm_reg(cmd)
#define read_reg_v2(cmd, buffer, buffer_size)   				lcm_util.dsi_dcs_read_lcm_reg_v2(cmd, buffer, buffer_size)  
#define AGOLD_CMD_MODE 0
       
#if (AGOLD_CMD_MODE)
#define LCM_DSI_CMD_MODE									1   
#endif


struct LCM_setting_table {
    unsigned cmd;
    unsigned char count;
    unsigned char para_list[64];
};


static struct LCM_setting_table lcm_initialization_setting[] = {
	
#if 0
// SET password		
{0xB9, 3,  {0xFF,0x83,0x79}}, 

{0xBA, 1,  {0x51}},   

// Issue DSC NOP command
{0xB1, 19, {0x00,0x50,0x44,0xEA,0x8D,0x08,0x11,0x11,0x11,0x27,    
            0x2F,0x9A,0x1A,0x42,0x0B,0x6E,0xF1,0x00,0xE6}},   

{0xB2, 13, {0x00,0x00,0xFE,0x08,0x04,0x19,0x22,0x00,0xFF,0x08,    
	    0x04,0x19,0x20}},    

{0xB4, 31, {0x80,0x08,0x00,0x32,0x10,0x03,0x32,0x13,0x70,0x32,    
            0x10,0x08,0x37,0x01,0x28,0x07,0x37,0x08,0x4C,0x20,    
            0x44,0x44,0x08,0x00,0x40,0x08,0x28,0x08,0x30,0x30,    
            0x04}},

{0xD5, 47, {0x00,0x00,0x0A,0x00,0x01,0x05,0x00,0x03,0x00,0x88,
	    0x88,0x88,0x88,0x23,0x01,0x67,0x45,0x02,0x13,0x88,
	    0x88,0x88,0x88,0x88,0x88,0x88,0x88,0x88,0x88,0x54,
	    0x76,0x10,0x32,0x31,0x20,0x88,0x88,0x88,0x88,0x88,
	    0x88,0x00,0x00,0x00,0x00,0x00,0x00}},

{0xE0, 35, {0x79,0x00,0x01,0x02,0x22,0x23,0x30,0x23,0x43,0x00,
	    0x01,0x12,0x17,0x19,0x17,0x17,0x13,0x18,0x00,0x01,
	    0x02,0x22,0x23,0x30,0x23,0x43,0x00,0x01,0x12,0x17,
	    0x19,0x17,0x17,0x13,0x18}},	
         		
{0xCC, 1,  {0x02}},
		         		
{0xB6, 4,  {0x00,0x88,0x00,0x88}},

// Sleep Out
{0x11, 1,  {0X00}},
{REGFLAG_DELAY, 150, {}}, 

// Display On
{0x29, 1,  {0X00}},
{REGFLAG_DELAY, 50, {}},

#else
{0xB9,3,{ 0xFF ,0x83 ,0x79}},
{0xBA,1,{ 0x51}},
{0xB1,19,{ 0x00 ,0x50 ,0x44 ,0xEA ,0x8D ,0x08 ,0x11 ,0x11 ,0x11 ,0x25 ,0x2d ,0x9A ,0x1A ,0x42 ,0x0B ,0x66 ,0xF1 ,0x00 ,0xE6}},
{0xB2,13,{ 0x00 ,0x00 ,0xFE ,0x08 ,0x04 ,0x19 ,0x12 ,0x00 ,0xFF ,0x08 ,0x04 ,0x19 ,0x20}},
{0xB4,31,{ 0x80 ,0x08 ,0x00 ,0x32 ,0x10 ,0x03 ,0x32 ,0x13 ,0x70 ,0x32 ,0x10 ,0x08 ,0x37 ,0x01 ,0x28 ,0x07 ,0x37 ,0x08 ,0x3C ,0x20 ,0x44 ,0x44 ,0x08 ,0x00 ,0x40 ,0x08 ,0x28 ,0x08 ,0x30 ,0x30 ,0x08}},
{0xD5,47,{ 0x00 ,0x00 ,0x0a ,0x00 ,0x01 ,0x05 ,0x00 ,0x03 ,0x00 ,0x88 ,0x88 ,0x88 ,0x88 ,0x23 ,0x01 ,0x67 ,0x45 ,0x02 ,0x13 ,0x88 ,0x88 ,0x88 ,0x88 ,0x88 ,0x88 ,0x88 ,0x88 ,0x88 ,0x88 ,0x54 ,0x76 ,0x10 ,0x32 ,0x31 ,0x20 ,0x88 ,0x88 ,0x88 ,0x88 ,0x88 ,0x88 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00}},
{0xE0,35,{ 0x79 ,0x05 ,0x0F ,0x14 ,0x26 ,0x29 ,0x3F ,0x2B ,0x45 ,0x04 ,0x0E ,0x13 ,0x17 ,0x18 ,0x16 ,0x16 ,0x12 ,0x17 ,0x05 ,0x0F ,0x14 ,0x26 ,0x29 ,0x3F ,0x2B ,0x45 ,0x04 ,0x0E ,0x13 ,0x17 ,0x18 ,0x16 ,0x16 ,0x12 ,0x17}},
{0xCC,1,{ 0x02}},
{0xB6,4,{ 0x00 ,0x88 ,0x00 ,0x88}}, //83
{0x36,1,{ 0x00}},
{0x3A,1,{ 0x77}},
{0x11,0,{}},
{REGFLAG_DELAY, 150, {}}, 
{0x29,0,{}},
{REGFLAG_DELAY, 20, {}},  
#endif
};

#if 0
static struct LCM_setting_table lcm_set_window[] = {
	{0x2A,	4,	{0x00, 0x00, (FRAME_WIDTH>>8), (FRAME_WIDTH&0xFF)}},
	{0x2B,	4,	{0x00, 0x00, (FRAME_HEIGHT>>8), (FRAME_HEIGHT&0xFF)}},
	{REGFLAG_END_OF_TABLE, 0x00, {}}
};


static struct LCM_setting_table lcm_sleep_out_setting[] = {
    // Sleep Out
	{0x11, 0, {0x00}},
    {REGFLAG_DELAY, 120, {}},

    // Display ON
	{0x29, 0, {0x00}},
	{REGFLAG_DELAY, 10, {}},
	
	{REGFLAG_END_OF_TABLE, 0x00, {}}
};


static struct LCM_setting_table lcm_deep_sleep_mode_in_setting[] = {
	// Display off sequence
	{0x28, 0, {0x00}},

    // Sleep Mode On
	{0x10, 0, {0x00}},

	{REGFLAG_END_OF_TABLE, 0x00, {}}
};
#endif


static struct LCM_setting_table lcm_backlight_level_setting[] = {
	{0x51, 1, {0xFF}},
	{REGFLAG_END_OF_TABLE, 0x00, {}}
};


static void push_table(struct LCM_setting_table *table, unsigned int count, unsigned char force_update)
{
	unsigned int i;
		LCM_setting_table_V3 para_tbl[1];
    for(i = 0; i < count; i++) {
		
        unsigned cmd;
        cmd = table[i].cmd;
		
        switch (cmd) {
			
            case REGFLAG_DELAY :
                MDELAY(table[i].count);
                break;
				
            case REGFLAG_END_OF_TABLE :
                break;
				
            default:
					//dsi_set_cmdq_V2(cmd, table[i].count, table[i].para_list, force_update);

				para_tbl[0].cmd = table[i].cmd;
				para_tbl[0].count = table[i].count;

				if(para_tbl[0].count > 1){
					para_tbl[0].id = DSI_DCS_LONG_PACKET_ID;
				    memcpy(para_tbl[0].para_list,table[i].para_list,para_tbl[0].count);
				}else if(para_tbl[0].count == 1){
					para_tbl[0].id = DSI_DCS_SHORT_PACKET_ID_1;
				    memcpy(para_tbl[0].para_list,table[i].para_list,para_tbl[0].count);
				}else if(para_tbl[0].count == 0){
					para_tbl[0].id = DSI_DCS_SHORT_PACKET_ID_0;
				}
				dsi_set_cmdq_V3(para_tbl,1,1);
       	}
    }
	
}


// ---------------------------------------------------------------------------
//  LCM Driver Implementations
// ---------------------------------------------------------------------------

static void lcm_set_util_funcs(const LCM_UTIL_FUNCS *util)
{
    memcpy(&lcm_util, util, sizeof(LCM_UTIL_FUNCS));
}


static void lcm_get_params(LCM_PARAMS *params)
{
		memset(params, 0, sizeof(LCM_PARAMS));
	
		params->type   = LCM_TYPE_DSI;

		params->width  = FRAME_WIDTH;
		params->height = FRAME_HEIGHT;

		// enable tearing-free
		params->dbi.te_mode 				= LCM_DBI_TE_MODE_VSYNC_ONLY;
		params->dbi.te_edge_polarity		= LCM_POLARITY_RISING;

		params->dbi.io_driving_current      = LCM_DRIVING_CURRENT_6575_16MA;
		
		params->dbi.data_format.format      = 3; // [chenlang], just a flag to idicate command set

#if (LCM_DSI_CMD_MODE)
		params->dsi.mode   = CMD_MODE;
#else
		params->dsi.mode   = SYNC_PULSE_VDO_MODE;
#endif
	
		// DSI
		/* Command mode setting */
		params->dsi.LANE_NUM				= LCM_TWO_LANE;
		//The following defined the fomat for data coming from LCD engine.
		params->dsi.data_format.color_order = LCM_COLOR_ORDER_RGB;
		params->dsi.data_format.trans_seq   = LCM_DSI_TRANS_SEQ_MSB_FIRST;
		params->dsi.data_format.padding     = LCM_DSI_PADDING_ON_LSB;
		params->dsi.data_format.format      = LCM_DSI_FORMAT_RGB888;

		// Highly depends on LCD driver capability.
		// Not support in MT6573
		params->dsi.packet_size=256;
		params->dsi.intermediat_buffer_num = 0;
		// Video mode setting		
		//params->dsi.intermediat_buffer_num = 2;

		params->dsi.PS=LCM_PACKED_PS_24BIT_RGB888;
#if 0
		params->dsi.vertical_sync_active				= 4; //5;
		params->dsi.vertical_backporch					= 6; //5;
		params->dsi.vertical_frontporch					= 6; //5;
		params->dsi.vertical_active_line				= FRAME_HEIGHT; 

		params->dsi.horizontal_sync_active				= 20;
		params->dsi.horizontal_backporch				= 46;
		params->dsi.horizontal_frontporch				= 21+10;
		params->dsi.horizontal_active_pixel				= FRAME_WIDTH;
#else
		params->dsi.vertical_sync_active				= 4;
		params->dsi.vertical_backporch					= 7;
		params->dsi.vertical_frontporch					= 7;
		params->dsi.vertical_active_line				= FRAME_HEIGHT; 

		params->dsi.horizontal_sync_active				= 78;
		params->dsi.horizontal_backporch				= 78;
		params->dsi.horizontal_frontporch				= 78;
		params->dsi.horizontal_active_pixel				= FRAME_WIDTH;

#endif
		// Bit rate calculation
		params->dsi.pll_div1=1;		// div1=0,1,2,3;div1_real=1,2,4,4 ----0: 546Mbps  1:273Mbps
		params->dsi.pll_div2=1;		// div2=0,1,2,3;div1_real=1,2,4,4	
		params->dsi.fbk_div =33;//30;    // fref=26MHz, fvco=fref*(fbk_div+1)*2/(div1_real*div2_real)

}


static void lcm_init(void)
{
#if defined(BUILD_LK)
	upmu_set_rg_vgp2_vosel(6);
	upmu_set_rg_vgp2_en(1);
#else
	hwPowerOn(MT6323_POWER_LDO_VGP2, VOL_3000, "Lance_LCM");
#endif
	MDELAY(20);

    SET_RESET_PIN(1);
	MDELAY(15);
    SET_RESET_PIN(0);
    MDELAY(5);
    SET_RESET_PIN(1);
    MDELAY(20);

	push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);
}


static void lcm_suspend(void)
{
#if 0
	push_table(lcm_deep_sleep_mode_in_setting, sizeof(lcm_deep_sleep_mode_in_setting) / sizeof(struct LCM_setting_table), 1);
	MDELAY(20);

    SET_RESET_PIN(1);
	MDELAY(15);
    SET_RESET_PIN(0);
    MDELAY(5);
    SET_RESET_PIN(1);
    MDELAY(20);

	#if defined(BUILD_LK)
	upmu_set_rg_vgp5_en(0);
	#else
	hwPowerDown(MT65XX_POWER_LDO_VGP5, "Lance_LCM");
	#endif
#else
	SET_RESET_PIN(1);
	MDELAY(10); 
	SET_RESET_PIN(0);
	MDELAY(10); 
	SET_RESET_PIN(1); // fix me
	MDELAY(10); 
#endif
}


static void lcm_resume(void)
{

	lcm_init();
	
}


static void lcm_update(unsigned int x, unsigned int y,
                       unsigned int width, unsigned int height)
{
	unsigned int x0 = x;
	unsigned int y0 = y;
	unsigned int x1 = x0 + width - 1;
	unsigned int y1 = y0 + height - 1;

	unsigned char x0_MSB = ((x0>>8)&0xFF);
	unsigned char x0_LSB = (x0&0xFF);
	unsigned char x1_MSB = ((x1>>8)&0xFF);
	unsigned char x1_LSB = (x1&0xFF);
	unsigned char y0_MSB = ((y0>>8)&0xFF);
	unsigned char y0_LSB = (y0&0xFF);
	unsigned char y1_MSB = ((y1>>8)&0xFF);
	unsigned char y1_LSB = (y1&0xFF);

	unsigned int data_array[16];

	data_array[0]= 0x00053902;
	data_array[1]= (x1_MSB<<24)|(x0_LSB<<16)|(x0_MSB<<8)|0x2a;
	data_array[2]= (x1_LSB);
	dsi_set_cmdq(data_array, 3, 1);
	
	data_array[0]= 0x00053902;
	data_array[1]= (y1_MSB<<24)|(y0_LSB<<16)|(y0_MSB<<8)|0x2b;
	data_array[2]= (y1_LSB);
	dsi_set_cmdq(data_array, 3, 1);

	data_array[0]= 0x00290508; //HW bug, so need send one HS packet
	dsi_set_cmdq(data_array, 1, 1);
	
	data_array[0]= 0x002c3909;
	dsi_set_cmdq(data_array, 1, 0);

}


static void lcm_setbacklight(unsigned int level)
{
	unsigned int default_level = 145;
	unsigned int mapped_level = 0;

	//for LGE backlight IC mapping table
	if(level > 255) 
			level = 255;

	if(level >0) 
			mapped_level = default_level+(level)*(255-default_level)/(255);
	else
			mapped_level=0;

	// Refresh value of backlight level.
	lcm_backlight_level_setting[0].para_list[0] = mapped_level;

	push_table(lcm_backlight_level_setting, sizeof(lcm_backlight_level_setting) / sizeof(struct LCM_setting_table), 1);
}


static void lcm_setpwm(unsigned int divider)
{
	// TBD
}


static unsigned int lcm_getpwm(unsigned int divider)
{
	// ref freq = 15MHz, B0h setting 0x80, so 80.6% * freq is pwm_clk;
	// pwm_clk / 255 / 2(lcm_setpwm() 6th params) = pwm_duration = 23706
	unsigned int pwm_clk = 23706 / (1<<divider);	
	return pwm_clk;
}

LCM_DRIVER RX_498HX_615B_82_lcm_drv = 
{
    .name			= "RX_498HX_615B_82",
	.set_util_funcs = lcm_set_util_funcs,
	.get_params     = lcm_get_params,
	.init           = lcm_init,
	.suspend        = lcm_suspend,
	.resume         = lcm_resume,
#if (LCM_DSI_CMD_MODE)
	.set_backlight	= lcm_setbacklight,
    .update         = lcm_update,
#endif
};