mtk-lk/dev/lcm/nt35510_dsi_vdo_6572/nt35510_dsi_vdo_6572.c

/* Copyright Statement:
*
* This software/firmware and related documentation ("MediaTek Software") are
* protected under relevant copyright laws. The information contained herein
* is confidential and proprietary to MediaTek Inc. and/or its licensors.
* Without the prior written permission of MediaTek inc. and/or its licensors,
* any reproduction, modification, use or disclosure of MediaTek Software,
* and information contained herein, in whole or in part, shall be strictly prohibited.
*/
/* MediaTek Inc. (C) 2015. All rights reserved.
*
* BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
* THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
* CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
* SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
* STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
* CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*/
#ifdef BUILD_LK
#include <string.h>
#else
#include <linux/string.h>
#if defined(BUILD_UBOOT)
#include <asm/arch/mt_gpio.h>
#else
#include <mach/mt_gpio.h>
#endif
#endif
#include "lcm_drv.h"

// ---------------------------------------------------------------------------
//  Local Constants
// ---------------------------------------------------------------------------

#define FRAME_WIDTH  (480)
#define FRAME_HEIGHT (800)

#define PHYSICAL_WIDTH  (56)  // mm
#define PHYSICAL_HEIGHT (93)  // mm

#define REGFLAG_DELAY                                       0xAB
#define REGFLAG_END_OF_TABLE                                0xAA   // END OF REGISTERS MARKER

// ---------------------------------------------------------------------------
//  Local Variables
// ---------------------------------------------------------------------------

static LCM_UTIL_FUNCS lcm_util;

#define SET_RESET_PIN(v)    (lcm_util.set_reset_pin((v)))

#define UDELAY(n) (lcm_util.udelay(n))
#define MDELAY(n) (lcm_util.mdelay(n))

#define LCM_ID       (0x55)
#define LCM_ID1       (0xC1)
#define LCM_ID2       (0x80)

// ---------------------------------------------------------------------------
//  Local Functions
// ---------------------------------------------------------------------------

#define dsi_set_cmdq_V2(cmd, count, ppara, force_update)    lcm_util.dsi_set_cmdq_V2(cmd, count, ppara, force_update)
#define dsi_set_cmdq(pdata, queue_size, force_update)       lcm_util.dsi_set_cmdq(pdata, queue_size, force_update)
#define wrtie_cmd(cmd)                                  lcm_util.dsi_write_cmd(cmd)
#define write_regs(addr, pdata, byte_nums)              lcm_util.dsi_write_regs(addr, pdata, byte_nums)
#define read_reg(cmd)                                           lcm_util.dsi_dcs_read_lcm_reg(cmd)
#define read_reg_v2(cmd, buffer, buffer_size)                   lcm_util.dsi_dcs_read_lcm_reg_v2(cmd, buffer, buffer_size)

struct LCM_setting_table {
	unsigned char cmd;
	unsigned char count;
	unsigned char para_list[64];
};


static struct LCM_setting_table lcm_sleep_out_setting[] = {
	// Sleep Out
	{0x11, 1, {0x00}},
	{REGFLAG_DELAY, 120, {}},

	// Display ON
	{0x29, 1, {0x00}},
	{REGFLAG_END_OF_TABLE, 0x00, {}}
};


static struct LCM_setting_table lcm_deep_sleep_mode_in_setting[] = {
	// Display off sequence
	{0x28, 1, {0x00}},
	{REGFLAG_DELAY, 10, {}},

	// Sleep Mode On
	{0x10, 1, {0x00}},
	{REGFLAG_DELAY, 120, {}},

	{REGFLAG_END_OF_TABLE, 0x00, {}}
};

static void push_table(struct LCM_setting_table *table, unsigned int count, unsigned char force_update)
{
	unsigned int i;

	for (i = 0; i < count; i++) {
		unsigned cmd;
		cmd = table[i].cmd;

		switch (cmd) {
			case REGFLAG_DELAY :
				MDELAY(table[i].count);
				break;

			case REGFLAG_END_OF_TABLE :
				break;

			default:
				dsi_set_cmdq_V2(cmd, table[i].count, table[i].para_list, force_update);

				if (cmd != 0xFF && cmd != 0x2C && cmd != 0x3C) {
					//#if defined(BUILD_UBOOT)
					//  printf("[DISP] - uboot - REG_R(0x%x) = 0x%x. \n", cmd, table[i].para_list[0]);
					//#endif
					while (read_reg(cmd) != table[i].para_list[0]);
				}
		}
	}
}


// ---------------------------------------------------------------------------
//  LCM Driver Implementations
// ---------------------------------------------------------------------------
static void lcm_set_util_funcs(const LCM_UTIL_FUNCS *util)
{
	memcpy(&lcm_util, util, sizeof(LCM_UTIL_FUNCS));
}


static void lcm_get_params(LCM_PARAMS *params)
{
	memset(params, 0, sizeof(LCM_PARAMS));

	params->type   = LCM_TYPE_DSI;

	params->width  = FRAME_WIDTH;
	params->height = FRAME_HEIGHT;

	// physical size
	params->physical_width = PHYSICAL_WIDTH;
	params->physical_height = PHYSICAL_HEIGHT;

	// enable tearing-free
	params->dbi.te_mode             = LCM_DBI_TE_MODE_DISABLED;
	params->dbi.te_edge_polarity        = LCM_POLARITY_RISING;

	params->dsi.mode   = BURST_VDO_MODE;

	// DSI
	/* Command mode setting */
	params->dsi.LANE_NUM                = LCM_TWO_LANE;

	//The following defined the fomat for data coming from LCD engine.
	params->dsi.data_format.color_order = LCM_COLOR_ORDER_RGB;
	params->dsi.data_format.trans_seq   = LCM_DSI_TRANS_SEQ_MSB_FIRST;
	params->dsi.data_format.padding     = LCM_DSI_PADDING_ON_LSB;
	params->dsi.data_format.format    = LCM_DSI_FORMAT_RGB888;

	// Video mode setting
	params->dsi.intermediat_buffer_num = 2;

	params->dsi.PS=LCM_PACKED_PS_24BIT_RGB888;

	params->dsi.word_count=480*3;   //DSI CMD mode need set these two bellow params, different to 6577
	params->dsi.vertical_active_line=800;

	params->dsi.vertical_sync_active                = 3;
	params->dsi.vertical_backporch                  = 20;
	params->dsi.vertical_frontporch                 = 20;
	params->dsi.vertical_active_line                = FRAME_HEIGHT;

	params->dsi.horizontal_sync_active              = 10;
	params->dsi.horizontal_backporch                = 50;
	params->dsi.horizontal_frontporch               = 50;
	params->dsi.horizontal_blanking_pixel               = 60;
	params->dsi.horizontal_active_pixel             = FRAME_WIDTH;
	params->dsi.compatibility_for_nvk = 0;      // this parameter would be set to 1 if DriverIC is NTK's and when force match DSI clock for NTK's

	// Bit rate calculation
	params->dsi.PLL_CLOCK = 221; //dsi clock customization: should config clock value directly
}


static void init_lcm_registers(void)
{
	unsigned int data_array[16];

	//*************Enable TE  *******************//
	data_array[0]= 0x00053902;
	data_array[1]= 0x2555aaff;
	data_array[2]= 0x00000001;
	dsi_set_cmdq(data_array, 3, 1);

	data_array[0]= 0x00093902;
	data_array[1]= 0x000201f8;
	data_array[2]= 0x00133320;
	data_array[3]= 0x00000048;
	dsi_set_cmdq(data_array, 4, 1);

	//*************Enable CMD2 Page1  *******************//
	data_array[0]=0x00063902;
	data_array[1]=0x52aa55f0;
	data_array[2]=0x00000108;
	dsi_set_cmdq(data_array, 3, 1);

	//************* AVDD: manual  *******************//
	data_array[0]=0x00043902;
	data_array[1]=0x0d0d0db0;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00043902;
	data_array[1]=0x343434b6;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00043902;
	data_array[1]=0x0d0d0db1;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00043902;
	data_array[1]=0x343434b7;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00043902;
	data_array[1]=0x000000b2;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00043902;
	data_array[1]=0x242424b8;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00023902;
	data_array[1]=0x000001bf;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00043902;
	data_array[1]=0x0f0f0fb3;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00043902;
	data_array[1]=0x343434b9;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00043902;
	data_array[1]=0x080808b5;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00023902;
	data_array[1]=0x000003c2;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00043902;
	data_array[1]=0x242424ba;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00043902;
	data_array[1]=0x007800bc;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00043902;
	data_array[1]=0x007800bd;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0]=0x00033902;
	data_array[1]=0x006400be;
	dsi_set_cmdq(data_array, 2, 1);

	//*************Gamma Table  *******************//
	data_array[0]=0x00353902;
	data_array[1]=0x003300D1;
	data_array[2]=0x003A0034;
	data_array[3]=0x005C004A;
	data_array[4]=0x00A60081;
	data_array[5]=0x011301E5;
	data_array[6]=0x01820154;
	data_array[7]=0x020002CA;
	data_array[8]=0x02340201;
	data_array[9]=0x02840267;
	data_array[10]=0x02B702A4;
	data_array[11]=0x02DE02CF;
	data_array[12]=0x03FE02F2;
	data_array[13]=0x03330310;
	data_array[14]=0x0000006D;
	dsi_set_cmdq(data_array, 15, 1);

	data_array[0]=0x00353902;
	data_array[1]=0x003300D2;
	data_array[2]=0x003A0034;
	data_array[3]=0x005C004A;
	data_array[4]=0x00A60081;
	data_array[5]=0x011301E5;
	data_array[6]=0x01820154;
	data_array[7]=0x020002CA;
	data_array[8]=0x02340201;
	data_array[9]=0x02840267;
	data_array[10]=0x02B702A4;
	data_array[11]=0x02DE02CF;
	data_array[12]=0x03FE02F2;
	data_array[13]=0x03330310;
	data_array[14]=0x0000006D;
	dsi_set_cmdq(data_array, 15, 1);

	data_array[0]=0x00353902;
	data_array[1]=0x003300D3;
	data_array[2]=0x003A0034;
	data_array[3]=0x005C004A;
	data_array[4]=0x00A60081;
	data_array[5]=0x011301E5;
	data_array[6]=0x01820154;
	data_array[7]=0x020002CA;
	data_array[8]=0x02340201;
	data_array[9]=0x02840267;
	data_array[10]=0x02B702A4;
	data_array[11]=0x02DE02CF;
	data_array[12]=0x03FE02F2;
	data_array[13]=0x03330310;
	data_array[14]=0x0000006D;
	dsi_set_cmdq(data_array, 15, 1);

	data_array[0]=0x00353902;
	data_array[1]=0x003300D4;
	data_array[2]=0x003A0034;
	data_array[3]=0x005C004A;
	data_array[4]=0x00A60081;
	data_array[5]=0x011301E5;
	data_array[6]=0x01820154;
	data_array[7]=0x020002CA;
	data_array[8]=0x02340201;
	data_array[9]=0x02840267;
	data_array[10]=0x02B702A4;
	data_array[11]=0x02DE02CF;
	data_array[12]=0x03FE02F2;
	data_array[13]=0x03330310;
	data_array[14]=0x0000006D;
	dsi_set_cmdq(data_array, 15, 1);

	data_array[0]=0x00353902;
	data_array[1]=0x003300D5;
	data_array[2]=0x003A0034;
	data_array[3]=0x005C004A;
	data_array[4]=0x00A60081;
	data_array[5]=0x011301E5;
	data_array[6]=0x01820154;
	data_array[7]=0x020002CA;
	data_array[8]=0x02340201;
	data_array[9]=0x02840267;
	data_array[10]=0x02B702A4;
	data_array[11]=0x02DE02CF;
	data_array[12]=0x03FE02F2;
	data_array[13]=0x03330310;
	data_array[14]=0x0000006D;
	dsi_set_cmdq(data_array, 15, 1);

	data_array[0]=0x00353902;
	data_array[1]=0x003300D6;
	data_array[2]=0x003A0034;
	data_array[3]=0x005C004A;
	data_array[4]=0x00A60081;
	data_array[5]=0x011301E5;
	data_array[6]=0x01820154;
	data_array[7]=0x020002CA;
	data_array[8]=0x02340201;
	data_array[9]=0x02840267;
	data_array[10]=0x02B702A4;
	data_array[11]=0x02DE02CF;
	data_array[12]=0x03FE02F2;
	data_array[13]=0x03330310;
	data_array[14]=0x0000006D;
	dsi_set_cmdq(data_array, 15, 1);
	MDELAY(10);

	// ********************  EABLE CMD2 PAGE 0 **************//
	data_array[0]=0x00063902;
	data_array[1]=0x52aa55f0;
	data_array[2]=0x00000008;
	dsi_set_cmdq(data_array, 3, 1);

	// ********************  EABLE DSI TE **************//
	data_array[0]=0x00033902;
	data_array[1]=0x0000fcb1;
	dsi_set_cmdq(data_array, 2, 1);

	data_array[0] = 0x00110500;
	dsi_set_cmdq(data_array, 1, 1);
	MDELAY(120);

	data_array[0]= 0x00290500;
	dsi_set_cmdq(data_array, 1, 1);
}


static void lcm_init(void)
{
	SET_RESET_PIN(1);
	SET_RESET_PIN(0);
	MDELAY(5);
	SET_RESET_PIN(1);
	MDELAY(20);

	init_lcm_registers();
}


static void lcm_suspend(void)
{
	unsigned int data_array[16];

	data_array[0] = 0x00100500;
	dsi_set_cmdq(data_array, 1, 1);
	MDELAY(120);

	data_array[0] = 0x00280500;
	dsi_set_cmdq(data_array, 1, 1);
	MDELAY(10);

	data_array[0] = 0x014F1500;
	dsi_set_cmdq(data_array, 1, 1);
	MDELAY(40);
}


static void lcm_resume(void)
{
	lcm_init();
}


static void lcm_setbacklight(unsigned int level)
{
	unsigned int data_array[16];


#if defined(BUILD_LK)
	printf("%s, %d\n", __func__, level);
#elif defined(BUILD_UBOOT)
	printf("%s, %d\n", __func__, level);
#else
	printk("lcm_setbacklight = %d\n", level);
#endif

	if (level > 255)
		level = 255;

	data_array[0]= 0x00023902;
	data_array[1] =(0x51|(level<<8));
	dsi_set_cmdq(data_array, 2, 1);
}


static void lcm_setpwm(unsigned int divider)
{
	// TBD
}


static unsigned int lcm_getpwm(unsigned int divider)
{
	// ref freq = 15MHz, B0h setting 0x80, so 80.6% * freq is pwm_clk;
	// pwm_clk / 255 / 2(lcm_setpwm() 6th params) = pwm_duration = 23706
	unsigned int pwm_clk = 23706 / (1<<divider);


	return pwm_clk;
}


static unsigned int lcm_compare_id(void)
{
	unsigned int id = 0, id2 = 0;
	unsigned char buffer[2];
	unsigned int data_array[16];


	SET_RESET_PIN(1);  //NOTE:should reset LCM firstly
	MDELAY(10);
	SET_RESET_PIN(0);
	MDELAY(10);
	SET_RESET_PIN(1);
	MDELAY(10);

	/*
	data_array[0] = 0x00110500;     // Sleep Out
	dsi_set_cmdq(data_array, 1, 1);
	MDELAY(120);
	*/

	//*************Enable CMD2 Page1  *******************//
	data_array[0]=0x00063902;
	data_array[1]=0x52AA55F0;
	data_array[2]=0x00000108;
	dsi_set_cmdq(data_array, 3, 1);
	MDELAY(10);

	data_array[0] = 0x00023700;// read id return two byte,version and id
	dsi_set_cmdq(data_array, 1, 1);
	MDELAY(10);

	read_reg_v2(0xC5, buffer, 2);
	id = buffer[0]; //we only need ID
	id2= buffer[1]; //we test buffer 1

	return (LCM_ID == id)?1:0;
}

static unsigned int lcm_ata_check(unsigned char *buffer)
{

#ifndef BUILD_LK
	unsigned int ret = 0;
	unsigned int x0 = FRAME_WIDTH/4;
	unsigned int x1 = FRAME_WIDTH*3/4;

	unsigned char x0_MSB = ((x0>>8)&0xFF);
	unsigned char x0_LSB = (x0&0xFF);
	unsigned char x1_MSB = ((x1>>8)&0xFF);
	unsigned char x1_LSB = (x1&0xFF);

	unsigned int data_array[3];
	unsigned char read_buf[4];

	printk("ATA check size = 0x%x,0x%x,0x%x,0x%x\n",x0_MSB,x0_LSB,x1_MSB,x1_LSB);
	data_array[0]= 0x0005390A;//HS packet
	data_array[1]= (x1_MSB<<24)|(x0_LSB<<16)|(x0_MSB<<8)|0x2a;
	data_array[2]= (x1_LSB);
	dsi_set_cmdq(data_array, 3, 1);

	data_array[0] = 0x00043700;// read id return two byte,version and id
	dsi_set_cmdq(data_array, 1, 1);

	read_reg_v2(0x2A, read_buf, 4);

	if ((read_buf[0] == x0_MSB) && (read_buf[1] == x0_LSB)
	        && (read_buf[2] == x1_MSB) && (read_buf[3] == x1_LSB))
		ret = 1;
	else
		ret = 0;

	x0 = 0;
	x1 = FRAME_WIDTH - 1;

	x0_MSB = ((x0>>8)&0xFF);
	x0_LSB = (x0&0xFF);
	x1_MSB = ((x1>>8)&0xFF);
	x1_LSB = (x1&0xFF);

	data_array[0]= 0x00053902;//HS packet
	data_array[1]= (x1_MSB<<24)|(x0_LSB<<16)|(x0_MSB<<8)|0x2a;
	data_array[2]= (x1_LSB);
	dsi_set_cmdq(data_array, 3, 1);
	return ret;
#else
	return 0;
#endif
}
// ---------------------------------------------------------------------------
//  Get LCM Driver Hooks
// ---------------------------------------------------------------------------
LCM_DRIVER nt35510_dsi_vdo_6572_drv = {
	.name           = "nt35510_dsi_vdo_6572",
	.set_util_funcs = lcm_set_util_funcs,
	.get_params     = lcm_get_params,
	.init           = lcm_init,
	.suspend        = lcm_suspend,
	.resume         = lcm_resume,
	.set_backlight  = lcm_setbacklight,
	.compare_id     = lcm_compare_id,
	.ata_check      = lcm_ata_check,
};