mtk-lk/dev/lcm/LP079X01/LP079X01.c

/* Copyright Statement:
*
* This software/firmware and related documentation ("MediaTek Software") are
* protected under relevant copyright laws. The information contained herein
* is confidential and proprietary to MediaTek Inc. and/or its licensors.
* Without the prior written permission of MediaTek inc. and/or its licensors,
* any reproduction, modification, use or disclosure of MediaTek Software,
* and information contained herein, in whole or in part, shall be strictly prohibited.
*/
/* MediaTek Inc. (C) 2015. All rights reserved.
*
* BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
* THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
* CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
* SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
* STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
* CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*
* The following software/firmware and/or related documentation ("MediaTek Software")
* have been modified by MediaTek Inc. All revisions are subject to any receiver\'s
* applicable license agreements with MediaTek Inc.
*/
#ifdef BUILD_LK
#include <string.h>
#else
#include <linux/string.h>
#endif
 
#ifdef BUILD_LK
#include <platform/mt_gpio.h>
#include <platform/mt_pmic.h>
#else
#include <mach/mt_gpio.h>
#include <mach/mt_pm_ldo.h>
#include <mach/upmu_common.h>
#endif
#include "lcm_drv.h"


// ---------------------------------------------------------------------------
//  Local Constants
// ---------------------------------------------------------------------------
#define FRAME_WIDTH  (768)
#define FRAME_HEIGHT (1024)


#define LCM_DSI_CMD_MODE    0

// ---------------------------------------------------------------------------
//  Local Variables
// ---------------------------------------------------------------------------
static LCM_UTIL_FUNCS lcm_util = {
    .set_gpio_out = NULL,
};

#define SET_RESET_PIN(v)    								(lcm_util.set_reset_pin((v)))

#define UDELAY(n) 											(lcm_util.udelay(n))
#define MDELAY(n) 											(lcm_util.mdelay(n))

// ---------------------------------------------------------------------------
//  Local Functions
// ---------------------------------------------------------------------------
#define dsi_set_cmdq_V2(cmd, count, ppara, force_update)    lcm_util.dsi_set_cmdq_V2(cmd, count, ppara, force_update)
#define dsi_set_cmdq(pdata, queue_size, force_update)		lcm_util.dsi_set_cmdq(pdata, queue_size, force_update)
#define wrtie_cmd(cmd)										lcm_util.dsi_write_cmd(cmd)
#define write_regs(addr, pdata, byte_nums)					lcm_util.dsi_write_regs(addr, pdata, byte_nums)
#define read_reg											lcm_util.dsi_read_reg()
#define read_reg_v2(cmd, buffer, buffer_size)               lcm_util.dsi_dcs_read_lcm_reg_v2(cmd, buffer, buffer_size)    

         
static void lcd_power_en(unsigned char enabled)
{
    if (enabled)
    {      
#ifdef BUILD_LK
        /* VGP2_PMU 3V */
        pmic_config_interface(DIGLDO_CON29, 0x6, PMIC_RG_VGP2_VOSEL_MASK, PMIC_RG_VGP2_VOSEL_SHIFT);
        pmic_config_interface(DIGLDO_CON8, 0x1, PMIC_RG_VGP2_EN_MASK, PMIC_RG_VGP2_EN_SHIFT);
#else
        upmu_set_rg_vgp2_vosel(0x6);
        upmu_set_rg_vgp2_en(0x1);
#endif
        mt_set_gpio_out(GPIO_LCM_PWR, GPIO_OUT_ONE);
    }
    else
    {      
#ifdef BUILD_LK
        /* VGP2_PMU 3V */
        pmic_config_interface(DIGLDO_CON8, 0x0, PMIC_RG_VGP2_EN_MASK, PMIC_RG_VGP2_EN_SHIFT);
        pmic_config_interface(DIGLDO_CON29, 0x0, PMIC_RG_VGP2_VOSEL_MASK, PMIC_RG_VGP2_VOSEL_SHIFT); 
#else
        upmu_set_rg_vgp2_en(0x0);        
        upmu_set_rg_vgp2_vosel(0x0);
#endif
        mt_set_gpio_out(GPIO_LCM_PWR, GPIO_OUT_ZERO);
    }
}


static void lcd_reset(unsigned char enabled)
{
    if (enabled)
    {
        mt_set_gpio_out(GPIO_LCM_RST, GPIO_OUT_ONE);
    }
    else
    {	
        mt_set_gpio_out(GPIO_LCM_RST, GPIO_OUT_ZERO);    	
    }
}


// ---------------------------------------------------------------------------
//  LCM Driver Implementations
// ---------------------------------------------------------------------------
static void lcm_set_util_funcs(const LCM_UTIL_FUNCS *util)
{
    memcpy(&lcm_util, util, sizeof(LCM_UTIL_FUNCS));
}


static void lcm_get_params(LCM_PARAMS *params)
{
    memset(params, 0, sizeof(LCM_PARAMS));

    params->type     = LCM_TYPE_DSI;
    params->width    = FRAME_WIDTH;
    params->height   = FRAME_HEIGHT;
    params->dsi.mode = BURST_VDO_MODE;

    // DSI
    /* Command mode setting */
    params->dsi.LANE_NUM				= LCM_FOUR_LANE;
    //The following defined the fomat for data coming from LCD engine.
    params->dsi.data_format.format		= LCM_DSI_FORMAT_RGB666;

    // Video mode setting		
    params->dsi.PS = LCM_PACKED_PS_18BIT_RGB666;

    params->dsi.vertical_sync_active				= 50;
    params->dsi.vertical_backporch					= 30;
    params->dsi.vertical_frontporch 				= 36;
    params->dsi.vertical_active_line				= FRAME_HEIGHT; 

    params->dsi.horizontal_sync_active				= 64;
    params->dsi.horizontal_backporch				= 56;
    params->dsi.horizontal_frontporch				= 60;
    params->dsi.horizontal_active_pixel 			= FRAME_WIDTH;

    // Bit rate calculation
    params->dsi.pll_div1 = 0;		
    params->dsi.pll_div2 = 1; 		
    params->dsi.fbk_div  = 21;

    params->dsi.cont_clock = 1;
    params->dsi.horizontal_bllp = 0x115; //word count=0x340
}

extern void DSI_clk_HS_mode(unsigned char enter);
static void init_lcm_registers(void)
{
    unsigned int data_array[16];
    
#ifdef BUILD_LK
    printf("%s, LK \n", __func__);
#else
    printk("%s, kernel", __func__);
#endif
    
    data_array[0] = 0x00010500;  //software reset					 
    dsi_set_cmdq(data_array, 1, 1);
    MDELAY(10);
    DSI_clk_HS_mode(1);
    MDELAY(80);
    
    data_array[0] = 0x00290500;  //display on                        
    dsi_set_cmdq(data_array, 1, 1);
}


static void lcm_init(void)
{
#if 0//def BUILD_LK
    return;//LK donothing
#else
    lcd_reset(0);
    lcd_power_en(0);
    lcd_power_en(1);
    MDELAY(50);//Must > 5ms
    lcd_reset(1);
    MDELAY(200);//Must > 50ms
    init_lcm_registers();
#endif  
}


static void lcm_suspend(void)
{
    unsigned int data_array[16];
    
    data_array[0] = 0x00280500;  //display off                        
    dsi_set_cmdq(data_array, 1, 1);
    MDELAY(5);
    lcd_reset(0);
    lcd_power_en(0);
    DSI_clk_HS_mode(0);
    MDELAY(10);
}


static void lcm_resume(void)
{
    lcd_reset(0);
    lcd_power_en(0);
    lcd_power_en(1);
    MDELAY(50);//Must > 5ms
    lcd_reset(1);
    MDELAY(200);//Must > 50ms
    init_lcm_registers();
}


LCM_DRIVER lp079x01_lcm_drv = 
{
    .name           = "lp079x01",
    .set_util_funcs = lcm_set_util_funcs,
    .get_params     = lcm_get_params,
    .init           = lcm_init,
    .suspend        = lcm_suspend,
    .resume         = lcm_resume,
    //.compare_id    = lcm_compare_id,
};